Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2018, Article ID 8457670, 13 pages
https://doi.org/10.1155/2018/8457670
Research Article

Effect of Nano-ppy/OMMT on the Physical and Electrochemical Properties of an Ionic Liquid Gel Polymer Electrolyte

School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China

Correspondence should be addressed to Xuan Li; nc.ude.ujt@214nauxil and Pei Yao; moc.361@ujtoayp

Received 19 October 2017; Accepted 23 November 2017; Published 24 January 2018

Academic Editor: Ester Vazquez

Copyright © 2018 Shuo Yang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. A. Elia, R. Bernhard, and J. Hassoun, “A lithium-ion oxygen battery using a polyethylene glyme electrolyte mixed with an ionic liquid,” RSC Advances, vol. 5, no. 27, pp. 21360–21365, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. S. Yun, S.-W. Song, S.-Y. Lee, S.-H. Kim, and D.-W. Kim, “Lithium metal polymer cells assembled with gel polymer electrolytes containing ionic liquid,” Current Applied Physics, vol. 10, no. 4, pp. e97–e100, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Krummacher, S. Passerini, and A. Balducci, “Ionic liquid assisted solid-state synthesis of lithium iron oxide nanoparticles for rechargeable lithium ion batteries,” Solid State Ionics, vol. 280, pp. 37–43, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. R. L. Lavall, S. Ferrari, C. Tomasi et al., “Novel polymer electrolytes based on thermoplastic polyurethane and ionic liquid/lithium bis(trifluoromethanesulfonyl)imide/propylene carbonate salt system,” Journal of Power Sources, vol. 195, no. 17, pp. 5761–5767, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Raghavan, X. Zhao, C. Shin et al., “Preparation and electrochemical characterization of polymer electrolytes based on electrospun poly(vinylidene fluoride-co-hexafluoropropylene)/polyacrylonitrile blend/composite membranes for lithium batteries,” Journal of Power Sources, vol. 195, no. 18, pp. 6088–6094, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Lee, M. Yanilmaz, O. Toprakci, K. Fu, and X. Zhang, “A review of recent developments in membrane separators for rechargeable lithium-ion batteries,” Energy & Environmental Science, vol. 7, no. 12, pp. 3857–3886, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. C. M. Costa, J. Nunes-Pereira, V. Sencadas, M. M. Silva, and S. Lanceros-Méndez, “Effect of fiber orientation in gelled poly(vinylidene fluoride) electrospun membranes for Li-ion battery applications,” Journal of Materials Science, vol. 48, no. 19, pp. 6833–6840, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Grandi, P. Mustarelli, A. Carollo, C. Tomasi, E. Quartarone, and A. Magistris, “PWA Doped SiO2 PEG Hybrid Materials of Class II,” Materials Sciences and Applications, vol. 01, no. 05, pp. 285–291, 2010. View at Publisher · View at Google Scholar
  9. B. Yu, F. Zhou, C. Wang, and W. Liu, “A novel gel polymer electrolyte based on poly ionic liquid 1-ethyl 3-(2-methacryloyloxy ethyl) imidazolium iodide,” European Polymer Journal, vol. 43, no. 6, pp. 2699–2707, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Manuel Stephan and K. S. Nahm, “Review on composite polymer electrolytes for lithium batteries,” Polymer Journal, vol. 47, no. 16, pp. 5952–5964, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Kaur, S. Singh, and R. Mehta, “Physico-chemical modification induced in PLGA/OMMT nanocomposite films by Li3+ ion beam,” Vacuum, vol. 125, pp. 170–179, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Deka and A. Kumar, “Electrical and electrochemical studies of poly(vinylidene fluoride)-clay nanocomposite gel polymer electrolytes for Li-ion batteries,” Journal of Power Sources, vol. 196, no. 3, pp. 1358–1364, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. Q. Zhang, F. Ding, W. Sun, and L. Sang, “Preparation of LAGP/P(VDF-HFP) polymer electrolytes for Li-ion batteries,” RSC Advances, vol. 5, no. 80, pp. 65395–65401, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. J.-W. Kim, K.-S. Ji, J.-P. Lee, and J.-W. Park, “Electrochemical characteristics of two types of PEO-based composite electrolyte with functional SiO2,” Journal of Power Sources, vol. 119-121, pp. 415–421, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. N. Byrne, J. Efthimiadis, D. R. MacFarlane, and M. Forsyth, “The enhancement of lithium ion dissociation in polyelectrolyte gels on the addition of ceramic nano-fillers,” Journal of Materials Chemistry, vol. 14, no. 1, pp. 127–133, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. F. Croce, S. Sacchetti, and B. Scrosati, “Advanced, high-performance composite polymer electrolytes for lithium batteries,” Journal of Power Sources, vol. 161, no. 1, pp. 560–564, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Yoonessi, H. Toghiani, W. L. Kingery, and C. U. Pittman Jr., “Preparation, characterization, and properties of exfoliated/delaminated organically modified clay/dicyclopentadiene resin nanocomposites,” Macromolecules , vol. 37, no. 7, pp. 2511–2518, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Kelnar, J. Kratochvíl, I. Fortelný et al., “Effect of halloysite on structure and properties of melt-drawn PCL/PLA microfibrillar composites,” Express Polymer Letters, vol. 10, no. 5, pp. 381–393, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. L. T. Costa, R. L. Lavall, R. S. Borges, J. Rieumont, G. G. Silva, and M. C. C. Ribeiro, “Polymer electrolytes based on poly(ethylene glycol) dimethyl ether and the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate: Preparation, physico-chemical characterization, and theoretical study,” Electrochimica Acta, vol. 53, no. 4, pp. 1568–1574, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Bansal, F. Cassel, F. Croce, M. Hendrickson, E. Plichta, and M. Salomon, “Conductivities and transport properties of gelled electrolytes with and without an ionic liquid for Li and Li-Ion batteries,” The Journal of Physical Chemistry B, vol. 109, no. 10, pp. 4492–4496, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. B. Singh and S. S. Sekhon, “Polymer electrolytes based on room temperature ionic liquid: 2,3-dimethyl-l-octylimidazolium triflate,” The Journal of Physical Chemistry B, vol. 109, no. 34, pp. 16539–16543, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Pattanayak and S. C. Jana, “Properties of bulk-polymerized thermoplastic polyurethane nanocomposites,” Polymer Journal, vol. 46, no. 10, pp. 3394–3406, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Mou, Y. Lu, and Y. Jiang, “A facile and cheap coating method to prepare SiO2/melamine-formaldehyde and SiO2/urea-formaldehyde composite microspheres,” Applied Surface Science, vol. 384, pp. 258–262, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Wang, Y. Xu, F. Yan, J. Zhu, and J. Wang, “Template-free prepared micro/nanostructured polypyrrole with ultrafast charging/discharging rate and long cycle life,” Journal of Power Sources, vol. 196, no. 4, pp. 2373–2379, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. B. K. Price, J. L. Hudson, and J. M. Tour, “Green chemical functionalization of single-walled carbon nanotubes in ionic liquids,” Journal of the American Chemical Society, vol. 127, no. 42, pp. 14867–14870, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. C.-Y. Chiang, Y. J. Shen, M. J. Reddy, and P. P. Chu, “Complexation of poly(vinylidene fluoride):LiPF6 solid polymer electrolyte with enhanced ion conduction in 'wet' form,” Journal of Power Sources, vol. 123, no. 2, pp. 222–229, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Song, Z. Zhao, W. Yu, B. Li, and X. Chen, “Morphological structures of poly(vinylidene fluoride)/montmorillonite nanocomposites,” SCIENCE CHINA Chemistry, vol. 50, no. 6, pp. 790–796, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. C. Fang, S. Yang, X. Zhao, P. Du, and J. Xiong, “Electrospun montmorillonite modified poly(vinylidene fluoride) nanocomposite separators for lithium-ion batteries,” Materials Research Bulletin, vol. 79, pp. 1–7, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. K. M. Kim, N.-G. Park, K. S. Ryu, and S. H. Chang, “Characterization of poly(vinylidenefluoride-co-hexafluoropropylene)based polymer electrolyte filled with Tio2 nanoparticles,” Polymer Journal, vol. 43, no. 14, pp. 3951–3957, 2002. View at Publisher · View at Google Scholar · View at Scopus
  30. K. M. Kim, N.-G. Park, K. S. Ryu, and S. H. Chang, “Characteristics of PVdF-HFP/TiO2 composite membrane electrolytes prepared by phase inversion and conventional casting methods,” Electrochimica Acta, vol. 51, no. 26, pp. 5636–5644, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Ma, L. B. Li, G. X. Gao, X. Y. Yang, and Y. You, “Effect of montmorillonite on the ionic conductivity and electrochemical properties of a composite solid polymer electrolyte based on polyvinylidenedifluoride/polyvinyl alcohol matrix for lithium ion batteries,” Electrochimica Acta, vol. 187, pp. 535–542, 2016. View at Publisher · View at Google Scholar · View at Scopus
  32. J. Cao, G. Hu, Z. Peng, K. Du, and Y. Cao, “Polypyrrole-coated LiCoO2 nanocomposite with enhanced electrochemical properties at high voltage for lithium-ion batteries,” Journal of Power Sources, vol. 281, pp. 49–55, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Li, Y. Ma, W. Wang, Y. Xu, J. You, and Y. Zhang, “A thermal and electrochemical properties research on gel polymer electrolyte membrane of lithium ion battery,” Journal of Physics and Chemistry of Solids, vol. 99, pp. 159–166, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. L. Li, J. Wang, P. Yang et al., “Preparation and characterization of gel polymer electrolytes containing N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide ionic liquid for lithium ion batteries,” Electrochimica Acta, vol. 88, pp. 147–156, 2013. View at Publisher · View at Google Scholar · View at Scopus
  35. W. Cho, S.-M. Kim, J. H. Song et al., “Improved electrochemical and thermal properties of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode materials by SiO2 coating,” Journal of Power Sources, vol. 282, pp. 45–50, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. X. Xu, H. Zhang, Y. Chen, N. Li, Y. Li, and L. Liu, “SiO2@SnO2/graphene composite with a coating and hierarchical structure as high performance anode material for lithium ion battery,” Journal of Alloys and Compounds, vol. 677, pp. 237–244, 2016. View at Publisher · View at Google Scholar · View at Scopus
  37. J. Jin, Z. Wen, X. Liang, Y. Cui, and X. Wu, “Gel polymer electrolyte with ionic liquid for high performance lithium sulfur battery,” Solid State Ionics, vol. 225, pp. 604–607, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. L. Liu, P. Yang, L. Li, Y. Cui, and M. An, “Application of bis(trifluoromethanesulfonyl)imide lithium-N-methyl-N- butylpiperidinium-bis(trifluoromethanesulfonyl)imide-poly(vinylidene difluoride-co-hexafluoropropylene) ionic liquid gel polymer electrolytes in Li/LiFePO4 batteries at different temperatures,” Electrochimica Acta, vol. 85, pp. 49–56, 2012. View at Publisher · View at Google Scholar · View at Scopus
  39. Y. Zhang, Z. Wang, H. Xiang, P. Shi, and H. Wang, “A thin inorganic composite separator for lithium-ion batteries,” Journal of Membrane Science, vol. 509, pp. 19–26, 2016. View at Publisher · View at Google Scholar · View at Scopus
  40. T. Yang, L. Sang, F. Ding, J. Zhang, and X. Liu, “Three- and four-electrode EIS analysis of water stable lithium electrode with solid electrolyte plate,” Electrochimica Acta, vol. 81, pp. 179–185, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. J. Cao, L. Wang, X. He et al., “In situ prepared nano-crystalline TiO2-poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries,” Journal of Materials Chemistry A, vol. 1, no. 19, pp. 5955–5961, 2013. View at Publisher · View at Google Scholar · View at Scopus
  42. J. Lee, C.-L. Lee, K. Park, and I.-D. Kim, “Synthesis of an Al2O3-coated polyimide nanofiber mat and its electrochemical characteristics as a separator for lithium ion batteries,” Journal of Power Sources, vol. 248, pp. 1211–1217, 2014. View at Publisher · View at Google Scholar · View at Scopus