Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2019, Article ID 5432040, 13 pages
https://doi.org/10.1155/2019/5432040
Research Article

Enhanced Biocompatibility and Antibacterial Activity of Selective Laser Melting Titanium with Zinc-Doped Micro-Nano Topography

1Department of Oral Implantology, Guanghua School of Stomatology, Hospital of Stomatology, Sun Yat-Sen University, Guangzhou, China
2Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China
3Guangzhou Institute of Advanced Technology, Chinese Academy of Science, Guangzhou, China
4Guangzhou Janus Biotechnology Co., Ltd, Chinese Academy of Sciences, Guangzhou, China

Correspondence should be addressed to Feilong Deng; nc.ude.usys.liam@lfgned

Received 28 January 2019; Accepted 2 April 2019; Published 21 May 2019

Academic Editor: Bo Tan

Copyright © 2019 Fan Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Dierens, S. Vandeweghe, J. Kisch, K. Nilner, and H. de Bruyn, “Long-term follow-up of turned single implants placed in periodontally healthy patients after 16-22 years: radiographic and peri-implant outcome,” Clinical Oral Implants Research, vol. 23, no. 2, pp. 197–204, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. S. S. Al-Johany, M. D. al Amri, S. Alsaeed, and B. Alalola, “Dental implant length and diameter: a proposed classification scheme,” Journal of Prosthodontics, vol. 26, no. 3, pp. 252–260, 2017. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Y. Chen, Z. Z. Zhang, X. S. Chen, C. Zhang, G. Zhang, and Z. Xu, “Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology,” The Journal of Prosthetic Dentistry, vol. 112, no. 5, pp. 1088–1095.e1, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Figliuzzi, F. Mangano, and C. Mangano, “A novel root analogue dental implant using CT scan and CAD/CAM: selective laser melting technology,” International Journal of Oral & Maxillofacial Surgery, vol. 41, no. 7, pp. 858–862, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Rana, M. M. Gellrich, and N. C. Gellrich, “Customised reconstruction of the orbital wall and engineering of selective laser melting (SLM) core implants,” British Journal of Oral and Maxillofacial Surgery, vol. 53, no. 2, pp. 208-209, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. J. Wally, A. M. Haque, A. Feteira, F. Claeyssens, R. Goodall, and G. C. Reilly, “Selective laser melting processed Ti6Al4V lattices with graded porosities for dental applications,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 90, pp. 20–29, 2019. View at Publisher · View at Google Scholar · View at Scopus
  7. P. H. Warnke, T. Douglas, P. Wollny et al., “Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering,” Tissue Engineering Part C: Methods, vol. 15, no. 2, pp. 115–124, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Shaoki, J. Y. Xu, H. P. Sun et al., “Osseointegration of three-dimensional designed titanium implants manufactured by selective laser melting,” Biofabrication, vol. 8, no. 4, article 045014, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Wang, B. J. Zhao, C. K. Liu, C. Wang, X. Tan, and M. Hu, “A comparison of biocompatibility of a titanium alloy fabricated by electron beam melting and selective laser melting,” PLoS One, vol. 11, no. 7, article e0158513, 2016. View at Publisher · View at Google Scholar · View at Scopus
  10. M. de Wild, R. Schumacher, K. Mayer et al., “Bone regeneration by the osteoconductivity of porous titanium implants manufactured by selective laser melting: a histological and micro computed tomography study in the rabbit,” Tissue Engineering Part A, vol. 19, no. 23-24, pp. 2645–2654, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Vaithilingam, E. Prina, R. D. Goodridge et al., “Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications,” Materials Science and Engineering: C, vol. 67, pp. 294–303, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. X. C. Hu, R. Xu, X. Yu et al., “Enhanced antibacterial efficacy of selective laser melting titanium surface with nanophase calcium phosphate embedded to TiO2 nanotubes,” Biomedical Materials, vol. 13, no. 4, article 045015, 2018. View at Publisher · View at Google Scholar · View at Scopus
  13. I. A. J. van Hengel, M. Riool, L. E. Fratila-Apachitei et al., “Selective laser melting porous metallic implants with immobilized silver nanoparticles kill and prevent biofilm formation by methicillin-resistant Staphylococcus aureus,” Biomaterials, vol. 140, pp. 1–15, 2017. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Y. Xu, X. S. Chen, C. Y. Zhang, Y. Liu, J. Wang, and F. L. Deng, “Improved bioactivity of selective laser melting titanium: surface modification with micro-/nano-textured hierarchical topography and bone regeneration performance evaluation,” Materials Science and Engineering: C, vol. 68, pp. 229–240, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. R. G. Xu, X. C. Hu, X. L. Yu et al., “Micro-/nano-topography of selective laser melting titanium enhances adhesion and proliferation and regulates adhesion-related gene expressions of human gingival fibroblasts and human gingival epithelial cells,” International Journal of Nanomedicine, vol. 13, pp. 5045–5057, 2018. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Echeverry-Rendón, O. Galvis, R. Aguirre, S. Robledo, J. G. Castaño, and F. Echeverría, “Modification of titanium alloys surface properties by plasma electrolytic oxidation (PEO) and influence on biological response,” Journal of Materials Science: Materials in Medicine, vol. 28, no. 11, p. 169, 2017. View at Publisher · View at Google Scholar · View at Scopus
  17. I. da Silva Vieira Marques, V. A. R. Barão, N. C. da Cruz et al., “Electrochemical behavior of bioactive coatings on cp-Ti surface for dental application,” Corrosion Science, vol. 100, pp. 133–146, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Kazek-Kęsik, M. Krok-Borkowicz, E. Pamuła, and W. Simka, “Electrochemical and biological characterization of coatings formed on Ti–15Mo alloy by plasma electrolytic oxidation,” Materials Science and Engineering: C, vol. 43, pp. 172–181, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Deng, W. Z. Zhang, P. F. Zhang, C. Liu, and J. Ling, “Improvement in the morphology of micro-arc oxidised titanium surfaces: a new process to increase osteoblast response,” Materials Science and Engineering: C, vol. 30, no. 1, pp. 141–147, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Derks and C. Tomasi, “Peri-implant health and disease. A systematic review of current epidemiology,” Journal of Clinical Periodontology, vol. 42, Suppl 16, pp. S158–S171, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. J. W. Costerton, P. S. Stewart, and E. P. Greenberg, “Bacterial biofilms: a common cause of persistent infections,” Science, vol. 284, no. 5418, pp. 1318–1322, 1999. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Wang, G. F. Wu, X. W. Liu, G. Sun, D. Li, and H. Wei, “A decomposable silica-based antibacterial coating for percutaneous titanium implant,” International Journal of Nanomedicine, vol. 12, pp. 371–379, 2017. View at Publisher · View at Google Scholar · View at Scopus
  23. K. Dydak, A. Junka, P. Szymczyk et al., “Development and biological evaluation of Ti6Al7Nb scaffold implants coated with gentamycin-saturated bacterial cellulose biomaterial,” PLoS One, vol. 13, no. 10, article e0205205, 2018. View at Publisher · View at Google Scholar · View at Scopus
  24. A. S. Prasad, “Discovery of human zinc deficiency: its impact on human health and disease,” Advances in Nutrition, vol. 4, no. 2, pp. 176–190, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. K. B. Hadley, S. M. Newman, and J. R. Hunt, “Dietary zinc reduces osteoclast resorption activities and increases markers of osteoblast differentiation, matrix maturation, and mineralization in the long bones of growing rats,” The Journal of Nutritional Biochemistry, vol. 21, no. 4, pp. 297–303, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Cheng, L. Mao, L. Wang et al., “Bidirectional regulation of zinc embedded titania nanorods: antibiosis and osteoblastic cell growth,” RSC Advances, vol. 5, no. 19, pp. 14470–14481, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Hu, W. Zhang, Y. Qiao, X. Jiang, X. Liu, and C. Ding, “Antibacterial activity and increased bone marrow stem cell functions of Zn-incorporated TiO2 coatings on titanium,” Acta Biomaterialia, vol. 8, no. 2, pp. 904–915, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Y. Zhang, H. J. Ai, and M. Qi, “Osteoblast growth on the surface of porous Zn-containing HA/TiO2 hybrid coatings on Ti substrate by MAO plus sol–gel methods,” Surface and Coating Technology, vol. 228, Supplement 1, pp. S202–S205, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. K. F. Huo, X. M. Zhang, H. R. Wang, L. Zhao, X. Liu, and P. K. Chu, “Osteogenic activity and antibacterial effects on titanium surfaces modified with Zn-incorporated nanotube arrays,” Biomaterials, vol. 34, no. 13, pp. 3467–3478, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Q. Qiao, W. J. Zhang, P. Tian et al., “Stimulation of bone growth following zinc incorporation into biomaterials,” Biomaterials, vol. 35, no. 25, pp. 6882–6897, 2014. View at Publisher · View at Google Scholar · View at Scopus
  31. A. Sirelkhatim, S. Mahmud, A. Seeni et al., “Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism,” Nano-Micro Letters, vol. 7, no. 3, pp. 219–242, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Kawakubo, T. Matsunaga, H. Ishizaki, S. Yamada, and Y. Hayashi, “Zinc as an essential trace element in the acceleration of matrix vesicles-mediated mineral deposition,” Microscopy Research and Technique, vol. 74, no. 12, pp. 1161–1165, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. X.-M. Zhuang, B. Zhou, J. L. Ouyang et al., “Enhanced MC3T3-E1 preosteoblast response and bone formation on the addition of nano-needle and nano-porous features to microtopographical titanium surfaces,” Biomedical Materials, vol. 9, no. 4, article 045001, 2014. View at Publisher · View at Google Scholar · View at Scopus
  34. W. J. Landis and J. R. Martin, “X‐ray photoelectron spectroscopy applied to gold‐decorated mineral standards of biological interest,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol. 2, no. 2, pp. 1108–1111, 1984. View at Publisher · View at Google Scholar · View at Scopus
  35. H. Y. Cheng, Z. Gong, H. Hu et al., “Design of alveolate Se-inserted TiO2 and its effect on osteosarcoma cells and osteoblasts,” Journal of Materials Chemistry B, vol. 5, no. 10, pp. 1988–2001, 2017. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Zhang, H. Y. Cheng, Z. N. Gong et al., “Fabrication of chitosan-18β-glycyrrhetinic acid modified titanium implants with nanorod arrays for suppression of osteosarcoma growth and improvement of osteoblasts activity,” Advanced Functional Materials, vol. 27, no. 43, article 1703932, 2017. View at Publisher · View at Google Scholar · View at Scopus
  37. Z. N. Gong, H. Cheng, M. Zhang et al., “Osteogenic activity and angiogenesis of a SrTiO3 nano-gridding structure on titanium surface,” Journal of Materials Chemistry B, vol. 5, no. 3, pp. 537–552, 2017. View at Publisher · View at Google Scholar · View at Scopus
  38. R. V. Chernozem, M. A. Surmeneva, B. Krause et al., “Functionalization of titania nanotubes with electrophoretically deposited silver and calcium phosphate nanoparticles: structure, composition and antibacterial assay,” Materials Science and Engineering: C, vol. 97, pp. 420–430, 2019. View at Publisher · View at Google Scholar · View at Scopus
  39. T. Albrektsson and A. Wennerberg, “Oral implant surfaces: part 1--review focusing on topographic and chemical properties of different surfaces and in vivo responses to them,” The International Journal of Prosthodontics, vol. 17, no. 5, pp. 536–543, 2004. View at Google Scholar
  40. H. J. Rønold and J. E. Ellingsen, “Effect of micro-roughness produced by TiO2 blasting—tensile testing of bone attachment by using coin-shaped implants,” Biomaterials, vol. 23, no. 21, pp. 4211–4219, 2002. View at Publisher · View at Google Scholar · View at Scopus
  41. H. J. Rønold, S. P. Lyngstadaas, and J. E. Ellingsen, “Analysing the optimal value for titanium implant roughness in bone attachment using a tensile test,” Biomaterials, vol. 24, no. 25, pp. 4559–4564, 2003. View at Publisher · View at Google Scholar · View at Scopus
  42. C. M. L. Bollen, W. Papaioanno, J. van Eldere, E. Schepers, M. Quirynen, and D. van Steenberghe, “The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis,” Clinical Oral Implants Research, vol. 7, no. 3, pp. 201–211, 1996. View at Publisher · View at Google Scholar · View at Scopus
  43. W. Teughels, N. van Assche, I. Sliepen, and M. Quirynen, “Effect of material characteristics and/or surface topography on biofilm development,” Clinical Oral Implants Research, vol. 17, no. S2, pp. 68–81, 2006. View at Publisher · View at Google Scholar · View at Scopus
  44. J. H. Wei, M. Yoshinari, S. Takemoto et al., “Adhesion of mouse fibroblasts on hexamethyldisiloxane surfaces with wide range of wettability,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 81B, no. 1, pp. 66–75, 2007. View at Publisher · View at Google Scholar · View at Scopus
  45. N. P. Lang, G. E. Salvi, G. Huynh-Ba, S. Ivanovski, N. Donos, and D. D. Bosshardt, “Early osseointegration to hydrophilic and hydrophobic implant surfaces in humans,” Clinical Oral Implants Research, vol. 22, no. 4, pp. 349–356, 2011. View at Publisher · View at Google Scholar · View at Scopus
  46. N. Donos, S. Hamlet, N. P. Lang et al., “Gene expression profile of osseointegration of a hydrophilic compared with a hydrophobic microrough implant surface,” Clinical Oral Implants Research, vol. 22, no. 4, pp. 365–372, 2011. View at Publisher · View at Google Scholar · View at Scopus
  47. S. C. Sartoretto, J. A. Calasans-Maia, Y. O. Costa, R. S. Louro, J. M. Granjeiro, and M. D. Calasans-Maia, “Accelerated healing period with hydrophilic implant placed in sheep tibia,” Brazilian Dental Journal, vol. 28, no. 5, pp. 559–565, 2017. View at Publisher · View at Google Scholar · View at Scopus
  48. A. W. J. Pelt, H. C. Mei, H. J. Busscher, J. Arends, and A. H. Weerkamp, “Surface free energies of oral streptococci,” FEMS Microbiology Letters, vol. 25, no. 2-3, pp. 279–282, 1984. View at Publisher · View at Google Scholar
  49. M. Astasov-Frauenhoffer, S. Glauser, J. Fischer, F. Schmidli, T. Waltimo, and N. Rohr, “Biofilm formation on restorative materials and resin composite cements,” Dental Materials, vol. 34, no. 11, pp. 1702–1709, 2018. View at Publisher · View at Google Scholar · View at Scopus
  50. G. Applerot, A. Lipovsky, R. Dror et al., “Enhanced antibacterial activity of nanocrystalline ZnO due to increased ROS-mediated cell injury,” Advanced Functional Materials, vol. 19, no. 6, pp. 842–852, 2009. View at Publisher · View at Google Scholar · View at Scopus
  51. A. Ratn, R. Prasad, Y. Awasthi, M. Kumar, A. Misra, and S. P. Trivedi, “Zn2+ induced molecular responses associated with oxidative stress, DNA damage and histopathological lesions in liver and kidney of the fish, Channa punctatus (Bloch, 1793),” Ecotoxicology and Environmental Safety, vol. 151, pp. 10–20, 2018. View at Publisher · View at Google Scholar · View at Scopus
  52. A. G. Rodríguez-Hernández, A. Juárez, E. Engel, and F. J. Gil, “Streptococcus sanguinis adhesion on titanium rough surfaces: effect of shot-blasting particles,” Journal of Materials Science: Materials in Medicine, vol. 22, no. 8, pp. 1913–1922, 2011. View at Publisher · View at Google Scholar · View at Scopus
  53. B. Rosan and R. J. Lamont, “Dental plaque formation,” Microbes and Infection, vol. 2, no. 13, pp. 1599–1607, 2000. View at Publisher · View at Google Scholar · View at Scopus
  54. A. Mombelli and N. P. Lang, “Microbial aspects of implant dentistry,” Periodontology 2000, vol. 4, no. 1, pp. 74–80, 1994. View at Publisher · View at Google Scholar · View at Scopus
  55. A. O. Matos, A. P. Ricomini-Filho, T. Beline et al., “Three-species biofilm model onto plasma-treated titanium implant surface,” Colloids and Surfaces B: Biointerfaces, vol. 152, pp. 354–366, 2017. View at Publisher · View at Google Scholar · View at Scopus
  56. Z. X. Zhang, B. B. Gu, W. J. Zhang, G. Kan, and J. Sun, “The enhanced characteristics of osteoblast adhesion to porous zinc–TiO2 coating prepared by plasma electrolytic oxidation,” Applied Surface Science, vol. 258, no. 17, pp. 6504–6511, 2012. View at Publisher · View at Google Scholar · View at Scopus
  57. M. Hie and I. Tsukamoto, “Administration of zinc inhibits osteoclastogenesis through the suppression of RANK expression in bone,” European Journal of Pharmacology, vol. 668, no. 1-2, pp. 140–146, 2011. View at Publisher · View at Google Scholar · View at Scopus
  58. A. Yamamoto, R. Honma, and M. Sumita, “Cytotoxicity evaluation of 43 metal salts using murine fibroblasts and osteoblastic cells,” Journal of Biomedical Materials Research, vol. 39, no. 2, pp. 331–340, 1998. View at Publisher · View at Google Scholar
  59. A. Ito, H. Kawamura, M. Otsuka et al., “Zinc-releasing calcium phosphate for stimulating bone formation,” Materials Science and Engineering: C, vol. 22, no. 1, pp. 21–25, 2002. View at Publisher · View at Google Scholar · View at Scopus