Influence of Milling Conditions on the Behavior of AB<sub>5</sub>-Type Materials as Metal Hydride Electrodes

<div>Discharge capacity as a function of cycle number for bulk MmNi<sub>5</sub> and ball milled for 5 and 20 hours compared to ball milled for 5 hours with 2 wt.% Ni.</div>

Journal of Nanomaterials

fig4

Figure 4

Figure 4: Influence of Milling Conditions on the Behavior of AB<sub>5</sub>-Type Materials as Metal Hydride Electrodes 

Journal of Nanomaterials

Influence of Milling Conditions on the Behavior of AB5-Type Materials as Metal Hydride Electrodes

Figure 4

Influence of Milling Conditions on the Behavior of AB₅-Type Materials as Metal Hydride Electrodes