Research Article
Graphene-Reinforced Biodegradable Resin Composites for Stereolithographic 3D Printing of Bone Structure Scaffolds
Figure 3
(a) Schematic of SLA process; (b) face up (X direction), (c) edge up (Y direction), and (d) upright (Z direction) of tensile test specimens; (e) face up (X direction), (f) edge up (Y direction), and (g) upright (Z direction) of flexural test specimens; images of tensile test specimens (h) X direction and (i) Z direction; (j) X direction specimens with graphene; images of (h) X direction and (i) Z direction (j) X direction with graphene specimens for flexural test.
(a) |
(b) |
(c) |
(d) |
(e) |
(f) |
(g) |
(h) |
(i) |
(j) |
(k) |
(l) |
(m) |