Electrospinning of Cyclodextrin Nanofibers: The Effect of Process Parameters

<div>Scanning electron micrographs of HP-<i>β</i>-CD fibers produced from aqueous solutions (top panel) and DMF solutions (bottom panel) using different diameter needles. The applied voltage, flow rate, and TCD were, respectively, set to 17.5 kV (for water-based electrospinning) or 15 kV (for DMF-based electrospinning), 0.25 mL·h<sup>-1</sup>, and 10 cm. Insets show the size distribution histograms of the respective fibers.</div>

Journal of Nanomaterials

fig8

Figure 8

Figure 8: Electrospinning of Cyclodextrin Nanofibers: The Effect of Process Parameters 