Research Article
Bi-objective Optimization of Process Parameters in Electric Discharge Machining of SS630 Using Grey Relation Analysis
Table 7
Obtained GRC and GRG values with their corresponding ranks.
| Ideal Seq. | Deviation seq. | GRC | GRG | Rank | MRR (mm3/min) | SR (μm) | MRR (mm3/min) | SR (μm) |
| 1 | 1 | 0.068 | 0.333333 | 0.880282 | 0.606808 | 4 | 2 | 0.58361 | 0.32 | 0.461421 | 0.609756 | 0.535588 | 7 | 3 | 0.881129 | 0.4 | 0.362023 | 0.555556 | 0.458789 | 12 | 4 | 0.765802 | 0.532 | 0.395007 | 0.484496 | 0.439751 | 14 | 5 | 0.52566 | 0.576 | 0.487491 | 0.464684 | 0.476087 | 9 | 6 | 0.459481 | 0.8 | 0.521115 | 0.384615 | 0.452865 | 13 | 7 | 0.861356 | 0 | 0.367281 | 1 | 0.68364 | 2 | 8 | 0.708652 | 0.436 | 0.413684 | 0.534188 | 0.473936 | 10 | 9 | 0.721111 | 0.876 | 0.409463 | 0.363372 | 0.386418 | 16 | 10 | 0.595382 | 0.72 | 0.456462 | 0.409836 | 0.433149 | 15 | 11 | 0.224597 | 0.64 | 0.690039 | 0.438596 | 0.564318 | 6 | 12 | 0.114299 | 0.176 | 0.813936 | 0.739645 | 0.776791 | 1 | 13 | 0.685335 | 0.476 | 0.421822 | 0.512295 | 0.467058 | 11 | 14 | 0.709681 | 0.288 | 0.413332 | 0.634518 | 0.523925 | 8 | 15 | 0 | 0.968 | 1 | 0.340599 | 0.6703 | 3 | 16 | 0.092468 | 1 | 0.843928 | 0.333333 | 0.588631 | 5 |
|
|