e-Modeling and Evolution of Nanolubricant Coupled Machining Parameters Using Statistical Tool

Table 9

(a) Response table for means (temperature)

Level	Speed (rpm)	Feed rate (mm/min)	Drill diameter (mm)
1	41.56	28.67	29.78
2	30.22	33.78	36.33
3	34.67	44	40.33
Delta	11.33	15.33	10.56
Rank	2	1	3

(b) ANOVA table for temperature

Source (temp)	DF	Seq SS	Adj SS	Adj MS
Regression	9	2810.08	2810.08	312.231	4.82	0.003
Linear	3	1772.94	169.74	56.580	0.87	0.474
Speed (rpm)	1	213.56	123.58	123.578	1.91	0.185
Feed (mm/min)	1	1058.00	15.72	15.719	0.24	0.629
Drill diameter (mm)	1	501.39	14.72	14.725	0.23	0.640
Square	3	422.39	422.39	140.796	2.17	0.128
Speed (rpm)speed (rpm)	1	373.40	373.41	373.407	5.77	0.028
Feed rate (mm/min) feed rate (mm/min)	1	39.19	39.19	39.185	0.61	0.447
Drill diameter (mm) drill diameter (mm)	1	9.80	9.80	9.796	0.15	0.702
Interaction	3	614.75	614.75	204.917	3.17	0.051
Speed (rpm) feed rate (mm/min)	1	574.08	574.08	574.083	8.87	0.008
Speed (rpm) drill diameter (mm)	1	0.33	0.33	0.333	0.01	0.944
Drill diameter (mm) feed rate (mm/min)	1	40.33	40.33	40.333	0.62	0.441
Residual error	17	1100.66	1100.66	64.745
Total	26	3910.74