Preparation of Nanosize Bone Powder from Waste and Development of Al Composite through Squeeze Casting Process

Table 4

Squeeze casting process parameters used for the fabrication of composites.

Sl. no.	Process parameters	Recommended conditions	References
1	Squeeze pressure	100 MPa	[30]
2	Squeeze pressure holding time	45 s	[31]
3	Melting temperature	700°C	[32]
4	Die temperature	250°C	[33]
5	Stirring time	5 min	[34]
6	Stirring speed	600 rpm	[33]
7	Reinforcement percentage	5% (in µ)	[35]
8	Reinforcement preheating temperature	300°C	[35]