Abstract
The optical transmission of a thin ferrofluid layer was investigated at various optical radiation wavelengths. The turning on of the durable external magnetic field pulse leads to nonmonotonic changes of the optical transmission value with minimal value during the field pulse. This phenomenon is related to the formation of columnar nanoparticle aggregates and transformation in the ferrofluid bulk. It was shown that time interval corresponding to the optical transmission minimum is proportional to the laser wavelength, which can be explained with Mie-like optical extinction on the ferrofluid aggregates and its dependence on the diameters of columnar aggregates. Hence, a simple experimental approach was proposed to measure and control the ferrofluid aggregates diameters in submicron spatial dimension ranges. Particularly, this approach could be used for the formation of composite nanomaterials consisting of polymers and magnetic nanoparticles with controlled structural parameters. These materials could be reused after parameters changes (e.g., lattice constant, aggregate size, and magnetic permeability tensor) with a heating/cooling cycle without the need for preparation of a new material from scratch.
1. Background
There are a large number of recent scientific reports dedicated to new nanomaterials, their synthesis methods, structures, and applications in various sectors, such as electronics [1, 2], energetics [3, 4], and life sciences [5, 6]. Manufacturing of magnetic single-domain nanoparticles has been an advanced subject of research in the modern nanophysics that are typically suspended in a carrier fluid, forming a ferrofluid (FF). Ferrofluids combine both liquid and magnetic characters [7].
The new century FF topicality revival is related to new application trends: magnetic targeted in vivo drug delivery [8, 9], local tumor hyperthermia [10], solid body surface polishing [11], programmable lithography mask [12], and others [13, 14]. The FF properties (magnetic permeability tensor, saturation magnetization, viscosity, and other properties) could be varied by its integral parts changes, for instance, in the carrier liquid and the type and concentration of nanoparticles. However, even without modification of such components, the FF properties could vary via magnetic nanoparticle aggregation phenomenon. There are two major kinds of FFs [15]: highly stabilized colloid of magnetic single-domain nanoparticles (“classical” FF) [16] and nonclassical FF [17]. Without an external magnetic field, the classical FF may contain only submicron primary aggregates with confined magnetic flux [18]. Oppositely, nonclassical FF contains large aggregates visible in an optical microscope [18, 19]. Application of an external magnetic field reversibly produces visible aggregates in both types of a FF [16, 17, 19–21]. Electrical field [22] and optical radiation [23] may also lead to formation of reversible aggregates. Magnetic field could produce 1D and 2D long-range ordered self-organized FF aggregate structures, including visible ones [14, 16, 24, 25]. They can be used for the formation of micro- and nanostructured magnetic materials, including liquid photonic crystals [25]. The reversible formation of a periodical magnetic aggregate structure could be used for composite materials with specifically assigned properties and ability to change properties later for specific applications. Particularly, the magnetic field sweep rate variation could be used to change the columnar aggregate diameter [26].
Investigations on the internal FF structure and its transformation are performed through various techniques of optical methods [16, 23, 27], small-angle neutron scattering [28, 29], ultrasound dissipation [30], and diffusion coefficient determination [31]. In the present work, we implemented experimental method of optical extinction measurements in an external magnetic field [16].
It has been shown that timestamp of a minimal optical extinction corresponds to columnar aggregates diameter in the order of magnitude of a laser wavelength [16]. The main aim of the present work was to study the corresponding spectral dependence. The observations may reveal a quantitative information about the FF submicron structure that can be used, particularly, for preparation of composite materials.
2. Methods
Initial FF sample contained Fe3O4 nanoparticle suspended in a kerosene prepared using Elmore method [32]. Oleic acid coating was performed to stabilize the nanoparticles. The mean diameter of the magnetite nanoparticles was determined using electronic microscopic as nm with corresponding average hydrodynamic diameter calculated as nm [16]. The magnetite volume fraction of the FF sample was observed as = 1.2%, which corresponds to an increase in FF sedimentation stability. Experimental procedure consisted of FF samples entrapped into round-shaped glass container with a diameter of 13 mm, which formed between a microscope slide and a cover slip as a gap. Such a shape was selected for decrease of the magnetic field spatial inhomogeneity, which numerically was estimated to be smaller than 1%. After entering FF into container, it was hermetically sealed by liquid polymer. The container thickness was controlled and restricted using copper wires with known diameters. In this work we used 50 μm FF container. The optical transmission experimental setup is presented on Figure 1.
Different sources of optical radiation (#1) with a beam diameter of ~1 mm were used: He-Ne red laser with parameters of = 630 nm (1.5 mW) and solid state lasers of green = nm (18 mW), infrared nm (12 mW), and blue nm (140 mW). The electromagnet (#2) was inducing a magnetic field along the optical radiation direction of . The FF sample (#3) was placed in the gap between electromagnet poles and the microscope slide (plane ) oriented orthogonally to magnetic field force lines and incident laser beam. The direction of optical radiation propagation was aligned normal (axis ) to the FF sample plane and coincided with the external magnetic field produced by an electromagnet, which allowed changing the applied magnetic field magnitude in the range of 0–3 kOe. The magnetic field pulse was produced using an electromechanical switch. The laser beam was directed to the beam splitter (#4), allowing the simultaneous transmission coefficient measurement and the FF layer visual observation with a photodetector (#5) and CMOS USB camera (#6), respectively. Research on the FF layer optical transmission changes was performed using sole durable magnetic field pulses ( s). The photodetector electric signal was transmitted to a personal computer (PC) using a voltage registration with an external analog-to-digital converter Triton 3000 U with time samples divisions of 150 ms. Temperature changes in FF samples during experiments were controlled by digital thermometer DS1820 (#7). The laser switched off after each measurement until temperature became equal to room temperature. The FF sample probing ray optical extinction measurement technique was used at various wavelengths [16]. Recovery of the initial state FF submicron structure was achieved in a long enough time interval between sequential measurements (~5 min).
3. Results and Discussion
The variations of optical transmission extinction value in a magnetic field have been described using the relative optical transmission coefficient , where () is an optical radiation intensity that passed the FF sample before (after) turning on the magnetic field pulse. It was shown [33, 34] that long-term magnetic field pulse application to either thin ionic or surfactant-stabilized FF layers [16, 35] leads to an emergence of an optical extinction trend inversion (OETI) phenomenon, which could be described in detail as follows. The FF transparency decreases after the magnetic field pulse rising edge (timestamp ) for the time interval . Then, the FF transparency starts growing until the magnetic field falling edge (Figure 2). The magnetic field switch-off was followed by a recovery of the initial optical transmission and returns internal structure to the original state.
The OETI phenomenon has been investigated at four different wavelengths (, , , and ) and different magnetic field magnitudes. Identical latter values correspond to different experimentally observed OETI timestamps of , , , and (Figure 2). Corresponding dependencies on the magnetic field magnitude are provided in Figure 3.
Due to the fact that lasers with different powers were used in our investigation, we monitored temperature in the FF samples during our measurements. Corresponding dependencies are provided in Figure 4.
The OETI phenomenon has been investigated for different magnetite volume fraction (Figure 5). As one can be seen from Figure 5, this phenomenon exists only at some values. The OETI phenomenon was not observed for much diluted FF samples (%) and for samples with magnetite volume fraction more than 2% (Figure 5). Such behavior requires more detailed study, which will be provided in our further works.
As it was shown [16, 17, 36], mostly larger (5%⋯10% mole fraction) magnetic nanoparticles produce aggregates. All other polydisperse FF nanoparticles usually perform within individual Brownian motion. In the case of classical magnetite FF, the large nanoparticle hydrodynamic diameter is given as nm [16]. Without the external magnetic field, these nanoparticles form sole primary aggregates without long-range ordering distributed over FF sample bulk [18, 37]. Turning on the magnetic field destroys the primary aggregates and forms 1D chain aggregates aligned with the field direction (axis Z). According to Langevin dynamics simulation [16], initially short chains are formed after ~1 ms, then passing additional ~10 ms, they fuse and form long chains (Figure 6(a)) with a length of restricted only by the FF container size. Further development of these structures exposed to the external magnetic field leads to their lateral aggregation and formation of thicker columnar aggregates [35, 38] (Figure 6(b)) with a thickness (which could be treated as a diameter assuming ) growing [16] (Figure 6(c)). This process is more durable and can be observed in real time. The lateral aggregation corresponds to the average large nanoparticles flow coming to the aggregate , where is an average number of nanoparticles passing the columnar aggregate surface area in a time . Here, the flow is averaged over sole nanoparticles, primary aggregates attaching, and the columnar aggregates fusion. The columnar aggregate volume growth depends on the nanoparticle mean volume and corresponding free space packing factor [39] as follows:where the integration is made over the columnar aggregate surface. Corresponding approximate diameter growth can be presented by the following equation:where in case of close packing of the cubic or hexagonal type [39]. Other packing types include quasicrystal-like structure, corresponding to smaller values. Particularly, random close packing corresponds to the value [40]. The timestamp (Figure 2) complies with the condition of [16, 41]:
(a)
(b)
(c)
Considering the optical extinction on sole nanoparticles and primary aggregates, further increase in columnar aggregates’ size means a decrease in total scattering centers cross section (perpendicular to the laser beam) area, resulting in an overall optical transmission growth (Figure 2). This phenomenon is known as the shadowing effect. The magnetic field turning off leads to aggregates destruction by the Brownian motion and a steric or entropic nanoparticles’ repulsion [42]. The nanostructure returns to the original state passing the residual OETI which had been analyzed in [16].
The relative optical transmission coefficient could take values larger than before turning off the magnetic field for the and wavelength cases (Figure 2). This phenomenon can be related to the strong shortwave optical dissipation in FF [23]. It is important to note that the carrier liquid itself (kerosene in the present case) does not possess such properties. Passing of the OETI leads to a reduction of the separate nanoparticles concentration around bulk columnar aggregates and, consequently, the effect [23] reduction. An aggregation effect at the end of the magnetic field pulse increases the difference between FF and its carrier liquid.
In scope of the given time frames, turning off the magnetic field leads to FF aggregates destruction in a quite fast manner and almost simultaneously (in a time of ~1 s). This is concluded from the optical transmission coefficient value of for all the four wavelengths (Figure 3). Hence, speeds of aggregates formation are different for , , , and wavelengths. However, the speeds of their destruction are almost identical. In the absence of the time reversal symmetry transformation (), this is an indicative of strong dissipative nature of the given system. Moreover, according to graph in Figure 2, the FF aggregates with diameters in the approximate range of 400–1000 nm are formed quite slowly (~1–100 s) and destructed much faster (in a time of ~1 s).
At the same external magnetic field strength (Figure 2) for all its researched values (Figure 3), the order of was found effective. Hence, the same initial and boundary conditions (magnetic field pulse parameters, FF dispersed phase volume concentration, carrier liquid viscosity, and investigated samples geometrical dimensions) correspond to simultaneous growth or decrease of and ; that is, . This observation is a justification of the lateral fusion of chain and columnar aggregates in a magnetic field (Figure 6).
Minimal values of and dependencies correspond to almost identical values for the magnetic field strength of Oe (Figure 3). This peculiarity can be related to the FF aggregates “compression,” for example, in a transition from nondense structures (at small value) to either random close packing or the close packing structure at regardless of the specific value of at . The wavelengths of and optical radiations do not reveal this minimum value. Corresponding aggregates at are smaller and increase in magnetic field driven aggregate growth velocity providing a much stronger effect compared to the compression, resulting in larger negative values of in shorter waves.
Achievement of a critical value of Oe corresponds to limit values to , , , and (Figure 3). This can be related to a depletion of sole large magnetic Fe3O4 nanoparticles and primary aggregates in the environment surrounding the columnar aggregates at stronger magnetic fields. Hence, all large particles are ordered in the columnar aggregates starting from field strength.
The optical transmission at wavelength corresponds to small oscillations of the optical transmission value (Figure 2). This can be related to the light interference on aggregates [23, 41]. This result has been observed only for the red laser due to its better spectral properties. Oscillations correspond to the columnar aggregates motion in the laser beam cross section during their fusion. Their 2D close packing hexagonal long-range order is kept unchanged but the lattice constant increases, as it was observed even with the optical microscope [16].
As an application of the given results, average aggregates growing velocity could be determined as in the FF layer at :where and are adjacent laser wavelengths; indices could take values of B, G, R, or IR; and and are corresponding critical limit values of (Figure 3). The average aggregates growth velocities for different period of after turning on the magnetic field pulse are shown in Table 1.
Decrease of the growing velocity value is related to large nanoparticles’ depletion in a FF environment and the corresponding condition of . The obtained information about the aggregates growth velocity could be used to practically control the FF submicron structure and, consequently, its static and dynamic physical properties, including optical and magnetic properties (magnetic permeability tensor, diffraction properties, photonic crystal parameters, and others). Usage of a reversible polymer material as a carrier liquid provides a restorable FF parameters’ control. Particularly, a reversible polymer, which can make transition between liquid state and solid state, can be applied [43].
4. Conclusion
In summary, the optical transmission of thin FF layer at various wavelengths was investigated. Durable external magnetic field pulse produces extinction trend inversion during the pulse. Turning off the magnetic field recovers the FF structure to the original state. This behavior is related to the emergence and growth of the FF columnar aggregates consisting of magnetic nanoparticles. Temporal parameters of the optical extinction give a tool for the qualitative and quantitative determination of FF submicron long-range structure, which can be used for production of composite materials with changeable and controllable physical structures and reversible physical properties in a practical application. The OETI phenomenon exists only at some values.
Abbreviations
| FF: | Ferrofluid |
| OETI: | Optical extinction trend inversion. |
Conflicts of Interest
The authors declare that they have no conflicts of interest.
Authors’ Contributions
Serhii Shulyma conceived the idea of the study and designed and conducted all experiments. Serhii Shulyma and Michail Petrychuk fabricated samples. Bogdan Tanygin carried out theoretical interpretation of the experimental results. Serhii Shulyma, Bogdan Tanygin, and Valery Kovalenko wrote the manuscript. All authors critically read and contributed to the manuscript preparation. All authors read and approved the final manuscript.
Acknowledgments
The authors would like to acknowledge Dr. Saeed Doroudiani for useful suggestions and editing the manuscript. They thank Dr. Vladimir Sokhatskiy, Dr. Alexander Klimov, and Dr. Yevgen Oberemok for using their laboratory equipment. They are grateful to Mrs. Daria Tanygina for assistance in processing of images.