Table of Contents Author Guidelines Submit a Manuscript
Research Letters in Nanotechnology
Volume 2009, Article ID 405153, 5 pages
http://dx.doi.org/10.1155/2009/405153
Research Letter

Development of SBR-Nanoclay Composites with Epoxidized Natural Rubber as Compatibilizer

1Materials Science Centre, Indian Institute of Technology, Kharagpur 721 302, India
2Department of Composite, Leibniz-Institute of Polymer Research Dresden, Hohe Straße 6, 01069 Dresden, Germany

Received 26 April 2009; Accepted 20 May 2009

Academic Editor: Jaime Grunlan

Copyright © 2009 R. Rajasekar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [15 citations]

The following is the list of published articles that have cited the current article.

  • Katrin Reincke, and Wolfgang Grellmann, “Mechanical and Fracture Mechanics Properties of Rubber Compositions with Reinforcing Components,” Rubber-Clay Nanocomposites, pp. 305–342, 2011. View at Publisher · View at Google Scholar
  • R. Rajasekar, G. C. Nayak, and C. K. Das, “Development of EPDM nanocomposites in presence of compatibiliser,” Plastics Rubber And Composites, vol. 40, no. 3, pp. 146–150, 2011. View at Publisher · View at Google Scholar
  • A. Das, R.N. Mahaling, K.W. Stöckelhuber, and G. Heinrich, “Reinforcement and migration of nanoclay in polychloroprene/ethylene–propylene–diene-monomer rubber blends,” Composites Science and Technology, vol. 71, no. 3, pp. 276–281, 2011. View at Publisher · View at Google Scholar
  • R. Rajasekar, G. C. Nayak, A. Malas, and C. K. Das, “Development of compatibilized SBR and EPR nanocomposites containing dual fi ller system,” Materials & Design, vol. 35, pp. 878–885, 2012. View at Publisher · View at Google Scholar
  • E. M. Sadek, and D. E. El-Nashar, “Preparation and characterization of nitrile butadiene rubber-nanoclay composites with maleic acid anhydride as compatibilizer. Part I,” High Performance Polymers, vol. 24, no. 7, pp. 654–663, 2012. View at Publisher · View at Google Scholar
  • D. E. El-Nashar, and E. M. Sadek, “Preparation and characterization of nitrile butadiene rubber-nanoclay composites with maleic acid anhydride as compatibilizer. Part II,” High Performance Polymers, vol. 24, no. 7, pp. 664–670, 2012. View at Publisher · View at Google Scholar
  • Doaa E El-Nashar, Aman I Khalaf, and Mostafa G Temraz, “Preparation and characterization of black shale?reinforced ethylene propylene diene monomer nanocomposites,” Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, vol. 227, no. 2, pp. 67–76, 2012. View at Publisher · View at Google Scholar
  • H.H. Le, K. Oßwald, S. Wießner, A. Das, K.-W. Stöckelhuber, R. Boldt, G. Gupta, G. Heinrich, and H.-J. Radusch, “Location of dispersing agent in rubber nanocomposites during mixing process,” Polymer, 2013. View at Publisher · View at Google Scholar
  • Yuan Gao, Xiaoping Wang, Meijun Liu, Xue Xi, Xin Zhang, and Demin Jia, “Effect of montmorillonite on carboxylated styrene butadiene rubber/hindered phenol damping material with improved extraction resistance,” Materials & Design, vol. 58, pp. 316–323, 2014. View at Publisher · View at Google Scholar
  • Alireza Monfared, Azam Jalali-Arani, and Naser Mohammadi, “The Effect of Epoxidized Natural Rubber and Two Kinds of Organoclay upon Molecular Interaction, Structure and Mechanical Properties of (Styrene-Butadiene Rubber/Acrylonitrile-Butadiene Rubber/Organoclay) Nanocomposites,” Journal of Macromolecular Science, Part B, vol. 53, no. 5, pp. 918–930, 2014. View at Publisher · View at Google Scholar
  • E. M. Sadek, D. E. El-Nashar, and S.M. Ahmed, “Effect of organoclay reinforcement on the curing characteristics and technological properties of styrene-butadiene rubber,” Polymer Composites, vol. 36, no. 7, pp. 1293–1302, 2014. View at Publisher · View at Google Scholar
  • Gholam Hossein Hamedi, Fereidoon Moghadas Nejad, and Khosro Oveisi, “Investigating the effects of using nanomaterials on moisture damage of HMA,” Road Materials And Pavement Design, vol. 16, no. 3, pp. 536–552, 2015. View at Publisher · View at Google Scholar
  • Jineesh Ayippadath Gopi, Sanjay Kumar Patel, Deba Kumar Tripathy, and Arup Kumar Chandra, “Development of cooler running PCR tire tread using SBR–ENR–nano clay composite,” International Journal of Plastics Technology, 2016. View at Publisher · View at Google Scholar
  • Reza Salehfard, Ali Abdi, and Behnam Amini, “Effect of SBR/NC on the Rheological Properties of Bitumen and Fatigue Resistance of Hot Mix Asphalt,” Journal of Materials in Civil Engineering, pp. 04016282, 2016. View at Publisher · View at Google Scholar
  • Behnam Amini, Mohammad Javad Rajabbolookat, Ali Abdi, and Reza Salehfard, “Investigating the influence of using nano-composites on storage stability of modified bitumen and moisture damage of HMA,” Petroleum Science and Technology, vol. 35, no. 8, pp. 800–805, 2017. View at Publisher · View at Google Scholar