Exploration of the Direct Use of Anodized Alumina as a Mold for Nanoimprint Lithography to Fabricate Magnetic Nanostructure over Large Area

<table>(a) XRD diagram of continuous FePt film and (b) <i>M-H</i> loops of continuous film and patterned FePt structure as marked. The size for the magnetic measurement of both samples was 0.25 cm<sup>2</sup>.</table>

Journal of Nanotechnology

fig4

Figure 4

Figure 4: Exploration of the Direct Use of Anodized Alumina as a Mold for Nanoimprint Lithography to Fabricate Magnetic Nanostructure over Large Area 

Figure 4 | Exploration of the Direct Use of Anodized Alumina as a Mold for Nanoimprint Lithography to Fabricate Magnetic Nanostructure over Large Area 