Journal of Powder Technology

New Materials for SLS: The Use of Antistatic and Flow Agents

Wall-to-Suspension Heat Transfer in a CFB Downcomer

Investigation into the Flow Properties of Coarse Solid Fuels for Use in Industrial Feed Systems

Measurement of Thermal Conductivity along the Radial Direction in a Vertical Cylindrical Packed Bed

Recent Progress in Processing of Tungsten Heavy Alloys

Wall-to-Bed Heat Transfer at Minimum Gas-Solid Fluidization

Synthesis, Characterization, and Crystal Structure Refinement of Lanthanum and Yttrium Substituted Polycrystalline 2M Type Zirconolite Phases: Ca_1-xM_xZrTi₂O₇ (M = Y, La and x = 0.2)

Workability Behaviour of Powder Metallurgy Aluminium Composites

Cumulative Effect of Pressing and Drying on Stress Generation within a Green Ceramic Compact

Choking Affects the Operation Diagram of a CFB Riser

Self-Nanoemulsifying Powder of Isotretinoin: Preparation and Characterization

The Effect of Hydrothermal Treatment on Silver Nanoparticles Stabilized by Chitosan and Its Possible Application to Produce Mesoporous Silver Powder

Sol-Gel Synthesis of Mullite Starting from Different Inorganic Precursors

Investigations into Deformation Characteristics during Open-Die Forging of SiC_p Reinforced Aluminium Metal Matrix Composites

New Technology for Increasing Through-Life Reliability of Ceramics Components Using Self-Crack-Healing Ability

Journal of Powder Technology

Table of Contents

Table of Contents

New Materials for SLS: The Use of Antistatic and Flow Agents

Wall-to-Suspension Heat Transfer in a CFB Downcomer

Investigation into the Flow Properties of Coarse Solid Fuels for Use in Industrial Feed Systems

Measurement of Thermal Conductivity along the Radial Direction in a Vertical Cylindrical Packed Bed

Recent Progress in Processing of Tungsten Heavy Alloys

Wall-to-Bed Heat Transfer at Minimum Gas-Solid Fluidization

Synthesis, Characterization, and Crystal Structure Refinement of Lanthanum and Yttrium Substituted Polycrystalline 2M Type Zirconolite Phases: Ca_1-xM_xZrTi₂O₇ (M = Y, La and x = 0.2)

Workability Behaviour of Powder Metallurgy Aluminium Composites

Cumulative Effect of Pressing and Drying on Stress Generation within a Green Ceramic Compact

Choking Affects the Operation Diagram of a CFB Riser

Self-Nanoemulsifying Powder of Isotretinoin: Preparation and Characterization

The Effect of Hydrothermal Treatment on Silver Nanoparticles Stabilized by Chitosan and Its Possible Application to Produce Mesoporous Silver Powder

Sol-Gel Synthesis of Mullite Starting from Different Inorganic Precursors

Investigations into Deformation Characteristics during Open-Die Forging of SiC_p Reinforced Aluminium Metal Matrix Composites

New Technology for Increasing Through-Life Reliability of Ceramics Components Using Self-Crack-Healing Ability

Journal of Powder Technology

Table of Contents

Table of Contents

New Materials for SLS: The Use of Antistatic and Flow Agents

Wall-to-Suspension Heat Transfer in a CFB Downcomer

Investigation into the Flow Properties of Coarse Solid Fuels for Use in Industrial Feed Systems

Measurement of Thermal Conductivity along the Radial Direction in a Vertical Cylindrical Packed Bed

Recent Progress in Processing of Tungsten Heavy Alloys

Wall-to-Bed Heat Transfer at Minimum Gas-Solid Fluidization

Synthesis, Characterization, and Crystal Structure Refinement of Lanthanum and Yttrium Substituted Polycrystalline 2M Type Zirconolite Phases: Ca1-xMxZrTi2O7 (M = Y, La and x = 0.2)

Workability Behaviour of Powder Metallurgy Aluminium Composites

Cumulative Effect of Pressing and Drying on Stress Generation within a Green Ceramic Compact

Choking Affects the Operation Diagram of a CFB Riser

Self-Nanoemulsifying Powder of Isotretinoin: Preparation and Characterization

The Effect of Hydrothermal Treatment on Silver Nanoparticles Stabilized by Chitosan and Its Possible Application to Produce Mesoporous Silver Powder

Sol-Gel Synthesis of Mullite Starting from Different Inorganic Precursors

Investigations into Deformation Characteristics during Open-Die Forging of SiCp Reinforced Aluminium Metal Matrix Composites

New Technology for Increasing Through-Life Reliability of Ceramics Components Using Self-Crack-Healing Ability

Synthesis, Characterization, and Crystal Structure Refinement of Lanthanum and Yttrium Substituted Polycrystalline 2M Type Zirconolite Phases: Ca_1-xM_xZrTi₂O₇ (M = Y, La and x = 0.2)

Investigations into Deformation Characteristics during Open-Die Forging of SiC_p Reinforced Aluminium Metal Matrix Composites