Table of Contents Author Guidelines Submit a Manuscript

Citations to this Journal [169 citations: 1–100 of 163 articles]

Articles published in Journal of Quality and Reliability Engineering have been cited 169 times. The following is a list of the 163 articles that have cited the articles published in Journal of Quality and Reliability Engineering.

  • Claire S. Teresi, and William W. Gerberich, “Silicon activation volumes for fracture as affected by hydrogen,” Scripta Materialia, vol. 144, pp. 56–59, 2018. View at Publisher · View at Google Scholar
  • Wenzhong Lou, Zhili Sun, Hongmao Tu, and Yunpeng Qian, “Structural reliability simulation for the latching mechanism in MEMS-based Safety and Arming device,” Advances in Engineering Software, vol. 108, pp. 48–56, 2017. View at Publisher · View at Google Scholar
  • Qixuan Bi, and Wenhao Gui, “Bayesian and Classical Estimation of Stress-Strength Reliability for Inverse Weibull Lifetime Models,” Algorithms, vol. 10, no. 2, pp. 71, 2017. View at Publisher · View at Google Scholar
  • Sanku Dey, Mazen Nassar, and Devendra Kumar, “$$\alpha $$ α Logarithmic Transformed Family of Distributions with Application,” Annals of Data Science, 2017. View at Publisher · View at Google Scholar
  • Abbas Mardani, Mehrbakhsh Nilashi, Norhayati Zakuan, Nanthakumar Loganathan, Somayeh Soheilirad, Muhamad Zameri Mat Saman, and Othman Ibrahim, “A systematic review and meta-Analysis of SWARA and WASPAS methods: Theory and applications with recent fuzzy developments,” Applied Soft Computing, 2017. View at Publisher · View at Google Scholar
  • Maria Victoria Traffano-Schiffo, Tatiana R. Aguirre Calvo, Marta Castro-Giraldez, Pedro J. Fito, and Patricio R. Santagapita, “Alginate Beads Containing Lactase: Stability and Microstructure,” Biomacromolecules, 2017. View at Publisher · View at Google Scholar
  • Fatih Kızılaslan, “E-Bayesian estimation for the proportional hazard rate model based on record values,” Communications in Statistics - Simulation and Computation, pp. 0–0, 2017. View at Publisher · View at Google Scholar
  • Vikas Kumar Sharma, “Bayesian analysis of head and neck cancer data using generalized inverse lindley stress-strength reliability model,” Communications in Statistics - Theory and Methods, pp. 0–0, 2017. View at Publisher · View at Google Scholar
  • Gyan Prakash, “Some Bayes estimators for Pareto Type-II progressive censored data,” Electronic Journal of Applied Statistical Analysis, vol. 10, no. 1, pp. 257–270, 2017. View at Publisher · View at Google Scholar
  • Natalia Riquelme, Maria Lidia Herrera, and Silvia Matiacevich, “Active films based on alginate containing lemongrass essential oil encapsulated: Effect of process and storage conditions,” Food and Bioproducts Processing, vol. 104, pp. 94–103, 2017. View at Publisher · View at Google Scholar
  • Maria Victoria Traffano-Schiffo, Marta Castro-Giraldez, Pedro J. Fito, and Patricio R. Santagapita, “Encapsulation of lactase in Ca(II)-alginate beads: Effect of stabilizers and drying methods,” Food Research International, 2017. View at Publisher · View at Google Scholar
  • Lin Si-Jian, Long Wei, Tian Da-Qing, and Liao Jun-Bi, “A new fatigue damage accumulation model considering loading history and loading sequence based on damage equivalence,” International Journal of Damage Mechanics, pp. 105678951770153, 2017. View at Publisher · View at Google Scholar
  • Rima Oudjedi Damerdji, and Myriam Noureddine, “Maintenance decision-making under the cost criterion and the competing risks approach,” International Journal of Decision Support System Technology, vol. 9, no. 1, pp. 32–48, 2017. View at Publisher · View at Google Scholar
  • Miguel Angel Navas, Carlos Sancho, and Jose Carpio, “Reliability analysis in railway repairable systems,” International Journal of Quality & Reliability Management, vol. 34, no. 8, pp. 1373–1398, 2017. View at Publisher · View at Google Scholar
  • Mohammad Pourgol-Mohammad, Amirmohsen Hejazi, Morteza Soleimani, Pejman Ghasemi, Alireza Ahmadi, and Davoud Jalali-Vahid, “Design for reliability of automotive systems; case study of dry friction clutch,” International Journal of System Assurance Engineering and Management, 2017. View at Publisher · View at Google Scholar
  • Amin Janghorbani, and Mohammad Hassan Moradi, “Fuzzy Evidential Network and Its Application as Medical Prognosis and Diagnosis Models,” Journal of Biomedical Informatics, 2017. View at Publisher · View at Google Scholar
  • Dadong Zhao, Miao Hu, Yujun Zhu, and Yu Zhou, “Energy balanced-based data transmission with mobile sensors,” Journal of Computational Methods in Sciences and Engineering, pp. 1–13, 2017. View at Publisher · View at Google Scholar
  • K. C. Siju, and M. Kumar, “Estimation of stress-strength reliability of a parallel system with active, warm and cold standby components,” Journal of Industrial and Production Engineering, pp. 1–21, 2017. View at Publisher · View at Google Scholar
  • Peter Kolis, Anil K. Bajaj, and Marisol Koslowski, “Quantification of Uncertainty in Creep Failure of RF-MEMS Switches,” Journal of Microelectromechanical Systems, vol. 26, no. 1, pp. 283–294, 2017. View at Publisher · View at Google Scholar
  • Abdullah, Mansor, and Ariffin, “Discerning the fatigue crack growth behavior of API X65 steels under sequence loading,” Latin American Journal of Solids and Structures, vol. 14, no. 2, pp. 202–216, 2017. View at Publisher · View at Google Scholar
  • Peyman Rafiee, Golta Khatibi, and Michael Zehetbauer, “A review of the most important failure, reliability and nonlinearity aspects in the development of microelectromechanical systems (MEMS),” Microelectronics International, vol. 34, no. 1, pp. 9–21, 2017. View at Publisher · View at Google Scholar
  • Peigang Deng, Ning Wang, Feng Cai, and Longquan Chen, “A high-force and high isolation metal-contact RF MEMS switch,” Microsystem Technologies, 2017. View at Publisher · View at Google Scholar
  • Pelumi E. Oguntunde, Mundher A. Khaleel, Mohammed T. Ahmed, Adebowale O. Adejumo, and Oluwole A. Odetunmibi, “A New Generalization of the Lomax Distribution with Increasing, Decreasing, and Constant Failure Rate,” Modelling and Simulation in Engineering, vol. 2017, pp. 1–6, 2017. View at Publisher · View at Google Scholar
  • Y V Pershin, and S N Shevchenko, “Computing with volatile memristors: an application of non-pinched hysteresis,” Nanotechnology, vol. 28, no. 7, pp. 075204, 2017. View at Publisher · View at Google Scholar
  • Shun-Peng Zhu, Qiang Liu, and Hong-Zhong Huang, “Probabilistic Modeling of Damage Accumulation for Fatigue Reliability Analysis,” Procedia Structural Integrity, vol. 4, pp. 3–10, 2017. View at Publisher · View at Google Scholar
  • João Eduardo Ribeiro, Manuel Braz César, and Hernâni Lopes, “Optimization of machining parameters to improve the surface quality,” Procedia Structural Integrity, vol. 5, pp. 355–362, 2017. View at Publisher · View at Google Scholar
  • Paolo Carmelo Cozzucoli, and Marco Marozzi, “Monitoring multivariate Poisson processes: a review and some new results,” Quality Technology & Quantitative Management, pp. 1–16, 2017. View at Publisher · View at Google Scholar
  • Mohammad Dehghanimohammadabadi, and Thomas K. Keyser, “Intelligent simulation: Integration of SIMIO and MATLAB to deploy decision support systems to simulation environment,” Simulation Modelling Practice and Theory, vol. 71, pp. 45–60, 2017. View at Publisher · View at Google Scholar
  • Dima Al Shamaa, and Karsten Geißler, “Grundlagen zur Festlegung der Sicherheitselemente des Betriebsfestigkeitsnachweises,” Stahlbau, vol. 86, no. 9, pp. 753–764, 2017. View at Publisher · View at Google Scholar
  • Jeffrey A. Klein, and Daniel R. Jeske, “Estimated Maximal Safe Dosages of Tumescent Lidocaine,” Anesthesia & Analgesia, vol. 122, no. 5, pp. 1350–1359, 2016. View at Publisher · View at Google Scholar
  • Mehdi Jabbari Nooghabi, “Estimation of the Lomax Distribution in the Presence of Outliers,” Annals of Data Science, 2016. View at Publisher · View at Google Scholar
  • K.R. Renjini, E.I.Abdul Sathar, and G. Rajesh, “Bayes estimation of dynamic cumulative residual entropy for Pareto distribution under type-II right censored data,” Applied Mathematical Modelling, 2016. View at Publisher · View at Google Scholar
  • Aboukhamseen, Mohammad, and Ghitany, “Weighted half exponential power distribution and associated inference,” Applied Mathematical Sciences, vol. 10, no. 1-4, pp. 91–108, 2016. View at Publisher · View at Google Scholar
  • Daniel J. Preston, Ariel Anders, Banafsheh Barabadi, Evelyn Tio, Yangying Zhu, DingRan Annie Dai, and Evelyn N. Wang, “Electrowetting-on-dielectric actuation of a vertical translation and angular manipulation stage,” Applied Physics Letters, vol. 109, no. 24, pp. 244102, 2016. View at Publisher · View at Google Scholar
  • Carla Segatto Strini Paixão, Murilo Aparecido Voltarelli, Tiago de Oliveira Tavares, Rouverson Pereira da Silva, and Marcelo Tufaile Cassia, “Efficiency and losses in mechanical harvesting of soybeans due to the plots format,” Australian Journal of Crop Science, vol. 10, no. 6, pp. 765–770, 2016. View at Publisher · View at Google Scholar
  • Hamed Akbarpour, Mahdi Mohajeri, and Masoumeh Akbarpour, “Pore diameter of nanoporous anodic alumina: Experimental study and application of ANFIS and MLR,” Chemometrics and Intelligent Laboratory Systems, vol. 153, pp. 82–91, 2016. View at Publisher · View at Google Scholar
  • Kang Rui, Zhang Qingyuan, Zeng Zhiguo, Enrico Zio, and Li Xiaoyang, “Measuring reliability under epistemic uncertainty: Review on non-probabilistic reliability metrics,” Chinese Journal of Aeronautics, 2016. View at Publisher · View at Google Scholar
  • Sanku Dey, Devendra Kumar, Pedro L. Ramos, and Francisco Louzada, “Exponentiated Chen Distribution: Properties and Estimation,” Communications in Statistics - Simulation and Computation, pp. 0–0, 2016. View at Publisher · View at Google Scholar
  • Shams Harandi, and Alamatsaz, “Generalized linear failure rate power series distribution,” Communications in Statistics - Theory and Methods, vol. 45, no. 8, pp. 2204–2227, 2016. View at Publisher · View at Google Scholar
  • Miloš Gligorić, Zoran Gligorić, Čedomir Beljić, Slavko Torbica, Svetlana Štrbac Savić, and Jasmina Nedeljković Ostojić, “Multi-Attribute Technological Modeling of Coal Deposits Based on the Fuzzy TOPSIS and C-Mean Clustering Algorithms,” Energies, vol. 9, no. 12, pp. 1059, 2016. View at Publisher · View at Google Scholar
  • Jiangwei Wang, and Scott X. Mao, “Atomistic perspective on in situ nanomechanics,” Extreme Mechanics Letters, 2016. View at Publisher · View at Google Scholar
  • Chen Xianmin, Dui Hongna, Fan Junling, and Sun Qin, “A statistically self-consistent fatigue damage accumulation model including load sequence effects under spectrum loading,” Frattura ed Integrita Strutturale, vol. 10, no. 38, pp. 319–330, 2016. View at Publisher · View at Google Scholar
  • Jingshi Meng, Stuart T. Douglas, and Abhijit Dasgupta, “MEMS Packaging Reliability in Board-Level Drop Tests Under Severe Shock and Impact Loading Conditions–Part I: Experiment,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 6, no. 11, pp. 1595–1603, 2016. View at Publisher · View at Google Scholar
  • Mustafa Nadar, and Fatih Kizilaslan, “Estimation of Reliability in a Multicomponent Stress-Strength Model Based on a Marshall-Olkin Bivariate Weibull Distribution,” IEEE Transactions on Reliability, vol. 65, no. 1, pp. 370–380, 2016. View at Publisher · View at Google Scholar
  • Sandra Cuentas, Rita Peñabaena-Niebles, and Ethel Garcia, “Support vector machine in statistical process monitoring: a methodological and analytical review,” International Journal of Advanced Manufacturing Technology, vol. 91, no. 1-4, pp. 485–500, 2016. View at Publisher · View at Google Scholar
  • Wen Chen, and Yingjie Liang, “A regularized Miner's rule for fatigue reliability analysis with Mittag-Leffler statistics,” International Journal of Damage Mechanics, vol. 25, no. 5, pp. 691–704, 2016. View at Publisher · View at Google Scholar
  • Salah H.R. Ali, and Omar M. Mohamd, “Dimensional and geometrical form accuracy of circular pockets manufactured for aluminum, copper and steel materials on CNC milling machine using CMM,” International Journal of Engineering Research in Africa, vol. 17, pp. 64–73, 2016. View at Publisher · View at Google Scholar
  • M. F. M. Yunoh, S. Abdullah, M. H. M. Saad, Z. M. Nopiah, and M. Z. Nuawi, “Evaluation of Fatigue Damage Classification Based on Probabilistic Weibull Analysis,” Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2016. View at Publisher · View at Google Scholar
  • Ahmed Z. Afify, Haitham M. Yousof, Gauss M. Cordeiro, Edwin M. M. Ortega, and Zohdy M. Nofal, “The Weibull Fréchet distribution and its applications,” Journal of Applied Statistics, pp. 1–19, 2016. View at Publisher · View at Google Scholar
  • Haroon Ahmed Khan, Andrew Richardson, and Imran Tahir, “Use of self-calibration data for multifunctional MEMS sensor prognostics,” Journal of Microelectromechanical Systems, vol. 25, no. 4, pp. 761–769, 2016. View at Publisher · View at Google Scholar
  • H. Mahfoud, A. El Barkany, and A. El Biyaali, “Preventive Maintenance Optimization in Healthcare Domain: Status of Research and Perspective,” Journal of Quality and Reliability Engineering, vol. 2016, pp. 1–10, 2016. View at Publisher · View at Google Scholar
  • Serdar Dindar, Sakdirat Kaewunruen, and Min An, “Identification of appropriate risk analysis techniques for railway turnout systems,” Journal of Risk Research, pp. 1–22, 2016. View at Publisher · View at Google Scholar
  • Muhammad Shoaib, Nor Hisham Hamid, Aamir Farooq Malik, Noohul Basheer Zain Ali, and Mohammad Tariq Jan, “A Review on Key Issues and Challenges in Devices Level MEMS Testing,” Journal of Sensors, vol. 2016, pp. 1–14, 2016. View at Publisher · View at Google Scholar
  • Harish Garg, “A novel approach for analyzing the reliability of series-parallel system using credibility theory and different types of intuitionistic fuzzy numbers,” Journal Of The Brazilian Society Of Mechanical Sciences And Engineering, vol. 38, no. 3, pp. 1021–1035, 2016. View at Publisher · View at Google Scholar
  • Muhammad Abid, Hafiz Zafar Nazir, Muhammad Riaz, and Zhengyan Lin, “Use of ranked set sampling in nonparametric control charts,” Journal of the Chinese Institute of Engineers, pp. 1–10, 2016. View at Publisher · View at Google Scholar
  • Tatiana R. Aguirre Calvo, Verónica M. Busch, and Patricio R. Santagapita, “Stability and release of an encapsulated solvent-free lycopene extract in alginate-based beads,” LWT - Food Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Deepak G. Khushalani, Rajesh S. Pande, and Rajendra M. Patrikar, “Fabrication and characterization of MEMS cantilever Array for switching applications,” Microelectronic Engineering, 2016. View at Publisher · View at Google Scholar
  • Wu Zhou, Jiangbo He, Xiaoping He, Huijun Yu, and Bei Peng, “Dielectric charging induced drift in micro device reliability-a review,” Microelectronics Reliability, 2016. View at Publisher · View at Google Scholar
  • Rohit R. Mutkekar, and Surekha B. Munoli, “Estimation of Reliability for Stress-Strength Cascade Model,” Open Journal of Statistics, vol. 06, no. 05, pp. 873–881, 2016. View at Publisher · View at Google Scholar
  • K.C. Siju, and M Kumar, “Reliability Analysis of Time Dependent Stress-Strength Model with Random Cycle Times,” Perspectives in Science, 2016. View at Publisher · View at Google Scholar
  • Christian H. Weiß, “Continuously Monitoring Categorical Processes,” Quality Technology & Quantitative Management, vol. 9, no. 2, pp. 171–188, 2016. View at Publisher · View at Google Scholar
  • Sotiris Bersimis, Aggeliki Sgora, and Stelios Psarakis, “The application of multivariate statistical process monitoring in non-industrial processes,” Quality Technology & Quantitative Management, pp. 1–24, 2016. View at Publisher · View at Google Scholar
  • Edwin Dugarte-Peña, and Nelfi González-Álvarez, “Robustificación De La Carta De Control Multivariada √(|S|) En La Fase I De Control,” Revista de la Facultad de Ciencias, vol. 5, no. 2, pp. 12–37, 2016. View at Publisher · View at Google Scholar
  • Salah H. R. Ali, Sarwat Z. A. Zahwi, Badr S. N. Azzam, and Mai S. Mabrok, “3D-Design, Fabrication and Metrological Characteristics for Knee Meniscus Replacement Prototype using Proposed Polymeric Material,” SAE Technical Papers, vol. 2016-, 2016. View at Publisher · View at Google Scholar
  • Fatih Kızılaslan, and Mustafa Nadar, “Estimation of reliability in a multicomponent stress–strength model based on a bivariate Kumaraswamy distribution,” Statistical Papers, 2016. View at Publisher · View at Google Scholar
  • Sergio Blason, Jose A.F.O. Correia, Abilio M.P. De Jesus, Rui A. B. Calcada, and Alfonso Fernandez-Canteli, “A probabilistic analysis of Miner's law for different loading conditions,” Structural Engineering and Mechanics, vol. 60, no. 1, pp. 71–90, 2016. View at Publisher · View at Google Scholar
  • Bakoban, “Optimal design of FSS- PALT for the generalized inverted rayleigh distribution using type II censoring,” Applied Mathematics and Information Sciences, vol. 9, no. 6, pp. 2869–2876, 2015. View at Publisher · View at Google Scholar
  • Mohamed Marzouk, and Ahmed Osama, “Fuzzy approach for optimum replacement time of mixed infrastructures,” Civil Engineering and Environmental Systems, pp. 1–12, 2015. View at Publisher · View at Google Scholar
  • Kamran Abbas, and Yincai Tang, “Analysis of Frechet Distribution Using Reference Priors,” Communications in Statistics - Theory and Methods, vol. 44, no. 14, pp. 2945–2956, 2015. View at Publisher · View at Google Scholar
  • Yogendra P. Chaubey, and Rui Zhang, “An extension of chens family of survival distributions with bathtub shape or increasing hazard rate function,” Communications in Statistics - Theory and Methods, vol. 44, no. 19, pp. 4049–4064, 2015. View at Publisher · View at Google Scholar
  • Federico Buja, Jaap Kokorian, Anirudha V. Sumant, and W. Merlijn van Spengen, “Studies on measuring surface adhesion between sidewalls in boron doped ultrananocrystalline diamond based microelectromechanical devices,” Diamond And Related Materials, vol. 55, pp. 22–31, 2015. View at Publisher · View at Google Scholar
  • Fatih K. Firat, and Semih Yucemen, “Comparison of loads in Turkish earthquake code with those computed statistically,” Earthquake and Structures, vol. 8, no. 5, pp. 977–994, 2015. View at Publisher · View at Google Scholar
  • Xian Zhao, Xiaoyue Wang, and Ge Sun, “Start-up demonstration tests with sparse connection,” European Journal of Operational Research, 2015. View at Publisher · View at Google Scholar
  • Zubair, Tahir, Gauss M. Cordeiro, and Mansoor, “The Weibull-Lomax distribution: Properties and applications,” Hacettepe Journal of Mathematics and Statistics, vol. 44, no. 2, pp. 455–474, 2015. View at Publisher · View at Google Scholar
  • Oleksiy Larin, and Oleksii Vodka, “A probability approach to the estimation of the process of accumulation of the high-cycle fatigue damage considering the natural aging of a material,” International Journal Of Damage Mechanics, vol. 24, no. 2, pp. 294–310, 2015. View at Publisher · View at Google Scholar
  • Rong Yuan, Haiqing Li, Hong-Zhong Huang, Shun-Peng Zhu, and Huiying Gao, “A nonlinear fatigue damage accumulation model considering strength degradation and its applications to fatigue reliability analysis,” International Journal of Damage Mechanics, vol. 24, no. 5, pp. 646–662, 2015. View at Publisher · View at Google Scholar
  • Kritika Bahadur, “Men's work-life balance: Factors affecting balance,” International Journal of Diverse Identities, vol. 14, no. 1, pp. 9–20, 2015. View at Publisher · View at Google Scholar
  • Tr Sreeram, and Asokan Thondiyath, “Combining Lean and Six Sigma in the context of Systems Engineering design,” International Journal of Lean Six Sigma, vol. 6, no. 4, pp. 290–312, 2015. View at Publisher · View at Google Scholar
  • Khosrow Noshad, and Anjali Awasthi, “Supplier quality development: A review of literature and industry practices,” International Journal of Production Research, vol. 53, no. 2, pp. 466–487, 2015. View at Publisher · View at Google Scholar
  • Sergey V. Gurov, and Lev V. Utkin, “Reliability analysis of load-sharing m-out-of-n systems with arbitrary load and different probability distributions of time to failure,” International Journal of Reliability and Safety, vol. 9, no. 1, pp. 21–35, 2015. View at Publisher · View at Google Scholar
  • Reetu Malhotra, and Gulshan Taneja, “Comparative analysis of two stochastic models subjected to inspection and scheduled maintenance,” International Journal of Software Engineering and its Applications, vol. 9, no. 10, pp. 179–188, 2015. View at Publisher · View at Google Scholar
  • Gnanasekar, Rama Thirumurugan, and Madhusuthanan, “Finite element simulation of knuckle and strut arm column assembly for automotive steering system,” International Journal of Vehicle Structures and Systems, vol. 7, no. 4, pp. 128–131, 2015. View at Publisher · View at Google Scholar
  • Khrueasom, and Pongpullponsak, “The integrated model of the Kolmogorov–Smirnov distribution-free statistic approach to process control and maintenance The Kolmogorov–Smirnov distribution-free statistic approach,” Journal of King Saud University - Science, vol. 29, no. 2, pp. 182–190, 2015. View at Publisher · View at Google Scholar
  • Dervilis, Worden, and Cross, “On robust regression analysis as a means of exploring environmental and operational conditions for SHM data,” Journal of Sound and Vibration, vol. 347, pp. 279–296, 2015. View at Publisher · View at Google Scholar
  • N. Dervilis, K. Worden, and E. J. Cross, “On robust regression analysis as a means of exploring environmental and operational conditions for SHM data,” Journal Of Sound And Vibration, vol. 347, pp. 279–296, 2015. View at Publisher · View at Google Scholar
  • Jinling Wang, Shengkui Zeng, Vadim V. Silberschmidt, and Jianbin Guo, “Multiphysics modeling approach for micro electro–thermo–mechanical actuator: Failure mechanisms coupled analysis,” Microelectronics Reliability, 2015. View at Publisher · View at Google Scholar
  • Jörg Benndorf, Cansin Yueksel, Masoud Shishvan, Heinrich Rosenberg, Thomas Thielemann, Robert Mittmann, Oliver Lohsträter, Matthias Lindig, Corinna Minnecker, Ralf Donner, and Wojciech Naworyta, “RTRO–Coal: Real-Time Resource-Reconciliation and Optimization for Exploitation of Coal Deposits,” Minerals, vol. 5, no. 3, pp. 546–569, 2015. View at Publisher · View at Google Scholar
  • Mekki Hajlaoui, “On the Charting Procedures: MEWMA Chart and DD-Diagram,” Open Journal of Statistics, vol. 05, no. 05, pp. 373–381, 2015. View at Publisher · View at Google Scholar
  • Hong Choon Ong, and Ekele Alih, “A control chart based on cluster-regression adjustment for retrospective monitoring of individual characteristics,” PLoS ONE, vol. 10, no. 4, 2015. View at Publisher · View at Google Scholar
  • Shun-Peng Zhu, Hong-Zhong Huang, Yanfeng Li, Yu Liu, and Yuanjian Yang, “Probabilistic modeling of damage accumulation for time-dependent fatigue reliability analysis of railway axle steels,” Proceedings Of The Institution Of Mechanical Engineers Part F-Journal Of Rail And Rapid Transit, vol. 229, no. 1, pp. 23–33, 2015. View at Publisher · View at Google Scholar
  • Aamir Saghir, Yousaf Ali Khan, and Subha Chakraborti, “The Phase I Dispersion Charts for Bivariate Process Monitoring,” Quality and Reliability Engineering International, 2015. View at Publisher · View at Google Scholar
  • Laura Cucinotta, Barbara D'Amen, Angelina Di Prinzio, Fabio Massimo Lanzoni, and Guido Pellegrini, “L'applicazione del metodo controfattuale per la valutazione di un intervento di welfare d'emergenza: il progetto Youssam a Roma Capitale,” RIV Rassegna Italiana di Valutazione, no. 59, pp. 124–147, 2015. View at Publisher · View at Google Scholar
  • Salah H. R. Ali, Sarwat Z. A. Zahwi, and Hassan H. Dadoura, “Proposed Metrological Method for Identifying Automotive Brake Discs,” SAE International Journal of Fuels and Lubricants, vol. 8, no. 1, pp. 41–49, 2015. View at Publisher · View at Google Scholar
  • J.R. González Dan, Josep Arnaldos, and R.M. Darbra, “Introduction of the human factor in the estimation of accident frequencies through fuzzy logic,” Safety Science, 2015. View at Publisher · View at Google Scholar
  • Reetu Malhotra, and Gulshan Taneja, “Comparative study between a single unit system and a two-unit cold standby system with varying demand,” SpringerPlus, vol. 4, no. 1, 2015. View at Publisher · View at Google Scholar
  • Wenhao Gui, and Meiping Xu, “Double acceptance sampling plan based on truncated life tests for half exponential power distribution,” Statistical Methodology, vol. 27, pp. 123–131, 2015. View at Publisher · View at Google Scholar
  • Yi Zhang, “A fuzzy residual strength based fatigue life prediction method,” Structural Engineering and Mechanics, vol. 56, no. 2, pp. 201–221, 2015. View at Publisher · View at Google Scholar
  • Zhineng Hu, Yurong Pei, and Ruikun Xie, “Analysis of Product Sampling for New Product Diffusion Incorporating Multiple-Unit Ownership,” Abstract and Applied Analysis, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Alessandro Barbiero, “Data Transformation for Confidence Interval Improvement: An Application to the Estimation of Stress-Strength Model Reliability,” Advances in Decision Sciences, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Serkan Eryilmaz, “Parallel and consecutive-k-out-of-n:F systems under stochastic deterioration,” Applied Mathematics and Computation, vol. 227, pp. 19–26, 2014. View at Publisher · View at Google Scholar