In recent years, advances in using computational fluid dynamics (CFD) software have greatly increased due to its great potential to save time in the design process compared to experimental testing for data acquisition. Additionally, in real-life tests, a limited number of quantities are measured at a time, while in a CFD analysis all desired quantities can be measured at once, and with a high resolution in space and time. This article reviews the advances made regarding CFD modeling and simulation for the design and optimization of crossflow hydro turbines (CFTs). The performance of these turbines depends on various parameters like the number of blades, tip speed ratio, type of airfoil, blade pitch, chord length and twist, and its distribution along the blade span. Technical aspects of the model design, which include boundary conditions, solution of the governing equations of the water flow through CFTS, and the assumptions made during the simulations are thoroughly described. From the review, a clear idea on the suitability of the accuracy CFD applications in the design and optimization of crossflow hydro turbines has been provided. Therefore, this gives an insight that CFD is a useful and effective tool suitable for the design and optimization of CFTs.

Hamisi Ally Mrope

Yusufu Abeid Chande Jande

Thomas T. Kivevele

A Review on Computational Fluid Dynamics Applications in the Design and Optimization of Crossflow Hydro Turbines

Evaluation of the maximum solar energy potential of a given area for possible deployment of solar energy technologies requires assessment of clear sky solar irradiance for the region under consideration. Such localized assessment is critical for optimal sizing of the technology to be deployed in order to realize the anticipated output. As the measurements are not always available where they are needed, models may be used to estimate them. In this study, three different models were adapted for the geographical location of the area under study and used to estimate clear sky global horizontal irradiance (GHI) at three locations in the subtropical desert climate of Namibia. The three models, selected on the basis of input requirements, were used to compute clear sky GHI at Kokerboom, Arandis, and Auas. The models were validated and evaluated for performance using irradiance data measured at each of the sites for a period of three years by computing statistical parameters such as mean bias error (MBE), root mean square error (RMSE), and the coefficient of determination (<i>R</i><sup>2</sup>), normalized MBE, and normalized RMSE. Comparative results between modelled and measured data showed that the models fit well the measured data, with normalized root mean square error values in the range 4&#x2013;8&#x0025;, while the <i>R</i><sup>2</sup> value was above 98&#x0025; for the three models. The adapted models can thus be used to compute clear sky GHI at these study areas as well as in other regions with similar climatic conditions.

Nicholas Kwarikunda

Zivayi Chiguvare

Performance Analysis of Clear Sky Global Horizontal Irradiance Models: Simple Models Adapted for Local Conditions

Energy demand is increasing due to population increment and industrialization. To meet this energy demand, technologies that use renewable energy such as solar energy are being developed. A parabolic solar cooker is one of the main solar cookers, which can cook food and boil water at a high temperature within a short period. This study aimed to design, construct, and evaluate the performance of the constructed parabolic solar cookers. Moreover, this study aimed to compare the constructed cooker with firewood, charcoal, kerosene, and electricity in terms of cooking time and energy cost. The cooker was constructed using different materials such as old satellite dishes, tyres, steel, and aluminum foil. The aperture diameter, aperture area, receiver diameter, receiver area, depth of the parabola, focal length, rim angle, circumference of the circle, surface area, length of the circumference, and concentration of the cooker were 1.8&#x2009;m, 2.54&#x2009;m<sup>2</sup>, 0.16&#x2009;m, 0.02&#x2009;m<sup>2</sup>, 0.3&#x2009;m, 0.67&#x2009;m, 67.38&#xb0;, 5.76&#x2009;m, 2.81&#x2009;m<sup>2</sup>, 5.76&#x2009;m, and 123.46, respectively. The cooker can track the sun from north to south and from east to west. The performance of the cooker was evaluated by calculating the efficiency and power. The output energy, input energy, and average upcoming solar radiation of the constructed parabolic solar cooker were 0.182&#x2009;kW/m<sup>2</sup>, 1.691&#x2009;kW/m<sup>2</sup>, and 0.665&#x2009;kW/m<sup>2</sup>, respectively. The efficiency and power of the cooker were 10.75&#x0025; and 0.3&#x2009;kW/hr, respectively. The constructed parabolic solar cooker relatively showed better performance in cooking different foods. A family, which has five members, was considered to compare the constructed cooker with other fuels in terms of energy cost of cooking. Since the parabolic solar cooker does not have any energy cost, it can save the energy cost of cooking foods. Therefore, parabolic solar cookers have a great advantage for developing countries including Ethiopia.

Solomon Tibebu

Arkbom Hailu

Design, Construction, and Evaluation of the Performance of Dual-Axis Sun Trucker Parabolic Solar Cooker and Comparison of Cooker

The aim of this study was to examine the effects of solvent-to-solid ratio, particle size, extraction time, and temperature on the extraction of Jatropha oil using three organic solvents, i.e., n-hexane, petroleum ether, and ethanol. The Soxhlet extraction method was used, and the parameters were varied in the following ranges: extraction temperature of 24&#x2013;80&#xb0;C, extraction time of 2 to 8&#x2009;h, solvent-to-solid ratio of 4&#x2009;:&#x2009;1 to 7&#x2009;:&#x2009;1, and particle size of 0.5&#x2013;0.8&#x2009;mm. After obtaining optimal conditions, a large volume of Jatropha oil was prepared, purified, and subjected to analysis of quality parameters. It was found that the oil content of the <i>Jatropha curcas</i> L. seeds used was 48.2&#x2009;&#xb1;&#x2009;0.12&#x0025; w/w. The highest oil yield of 47.5&#x2009;&#xb1;&#x2009;0.11&#x0025; w/w corresponding to an oil recovery of 98.6&#x2009;&#xb1;&#x2009;0.3&#x0025; w/w was obtained with n-hexane under the following conditions: solvent-to-solid ratio of 6&#x2009;:&#x2009;1, particle size of 0.5&#x2013;0.8&#x2009;mm, extraction time of 7&#x2009;h, and extraction temperature of 68&#xb0;C. This was followed by that of petroleum ether (46.2&#x2009;&#xb1;&#x2009;0.15&#x0025; w/w) and lastly by ethanol (43&#x2009;&#xb1;&#x2009;0.18&#x0025; w/w). The quality parameters of the oil extracted compared favorably well with most of the values reported in the literature, suggesting that the oil was of good quality for biodiesel production. Environmental and safety concerns over the use of hexane pose a great challenge. Thus, ethanol, which is environmentally benign, is recommended for application. The conditions for ethanol extraction that gave high oil yield were as follows: extraction temperature of 70&#xb0;C, extraction time of 7&#x2009;h, solvent-to-solid ratio of 6&#x2009;:&#x2009;1, particle size of 0.5&#x2013;0.8&#x2009;mm, and oil yield of 43&#x2009;&#xb1;&#x2009;0.18&#x0025; w/w corresponding to an oil recovery of 89.2&#x2009;&#xb1;&#x2009;0.4&#x0025; w/w.

Justin W. Ntalikwa

Solvent Extraction of Jatropha Oil for Biodiesel Production: Effects of Solvent-to-Solid Ratio, Particle Size, Type of Solvent, Extraction Time, and Temperature on Oil Yield

The highest power conversion efficiency (PCE) for organic-inorganic perovskite solar cells based on lead is reported as 25.2% in 2019. Lead-based hybrid perovskite materials are used in several photovoltaics applications, but these are not highly favored due to the toxicity of lead and volatility of organic cations. On the other hand, hybrid lead-free double perovskite has no such harm. In this research study, SCAPS numerical simulation is utilized to evaluate and compare the results of perovskite solar cell based on double perovskite <svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.29107pt" id="M1" height="12.5794pt" version="1.1" viewBox="-0.0498162 -9.28833 64.8495 12.5794" width="64.8495pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-41" d="M300 -147C201 -63 143 98 143 270S200 602 300 686L282 710C136 610 70 450 70 271V270C70 89 136 -72 282 -170L300 -147Z"/></g><g transform="matrix(.013,0,0,-0.013,4.498,0)"><path id="g190-71" d="M493 503C489 551 484 614 483 650H43V622C120 616 128 611 128 525V126C128 40 120 34 40 28V0H312V28C221 34 213 40 213 126V307H316C407 307 412 296 424 227H453V420H424C412 355 407 346 316 346H213V584C213 613 216 616 246 616H322C398 616 419 607 436 579C449 559 455 539 464 499L493 503Z"/></g><g transform="matrix(.013,0,0,-0.013,10.357,0)"><path id="g190-66" d="M673 0V28C608 34 594 43 563 129C499 303 432 494 370 665L339 656L132 132C98 43 84 37 20 28V0H238V28C162 35 154 45 175 108C188 150 203 192 219 237H432C454 176 474 122 487 83S491 36 428 28V0H673ZM418 280H234C265 362 296 450 328 535H330L418 280Z"/></g><g transform="matrix(.013,0,0,-0.013,19.4,0)"><path id="g113-42" d="M275 270C275 450 212 609 64 710L45 686C145 604 203 442 203 270S147 -63 45 -147L64 -170C213 -68 275 89 275 270Z"/></g><g transform="matrix(.0091,0,0,-0.0091,23.898,3.132)"><path id="g50-51" d="M414 144C384 79 371 75 317 75H135L276 221C367 316 408 376 408 465C408 570 327 635 237 635C179 635 131 609 100 575L42 494L67 471C94 510 138 565 205 565C277 565 321 517 321 435C321 348 258 270 195 195C146 137 88 81 33 26V0H411C423 44 433 88 446 135L414 144Z"/></g><g transform="matrix(.013,0,0,-0.013,28.844,0)"><path id="g190-67" d="M372 352C427 368 507 407 507 502C507 548 486 592 451 616C420 638 376 650 301 650H44V622C124 616 128 610 128 527V123C128 40 122 34 36 28V0H257C336 0 402 12 453 40C512 72 548 124 548 191C548 291 471 335 372 350V352ZM213 362V558C213 591 216 602 226 608C235 614 258 618 282 618C377 618 415 558 415 490C415 406 369 362 260 362H213ZM213 328H258C380 328 450 283 450 181C450 76 377 35 296 34C231 34 213 53 213 125V328Z"/></g><g transform="matrix(.013,0,0,-0.013,36.384,0)"><path id="g190-106" d="M135 536C164 536 186 560 186 587C186 617 164 639 136 639C109 639 85 617 85 587C85 560 109 536 135 536ZM252 0V26C188 32 181 38 181 106V451C138 433 90 420 39 412V388C99 379 102 374 102 312V106C102 38 95 32 32 26V0H252Z"/></g><g transform="matrix(.013,0,0,-0.013,39.868,0)"><path id="g190-68" d="M614 175C564 76 510 21 408 21C256 21 146 149 146 336C146 488 235 629 402 629C510 629 570 586 597 480L626 488C620 541 614 582 606 638C578 643 510 665 429 665C206 665 44 527 44 316C44 157 153 -15 402 -15C474 -15 558 5 586 11C604 45 629 119 643 165L614 175Z"/></g><g transform="matrix(.013,0,0,-0.013,48.317,0)"><path id="g190-118" d="M518 50L491 51C452 54 444 60 444 110V444C429 441 405 437 377 434C348 430 314 427 287 426V403L323 397C356 392 365 386 365 333V99C331 66 293 51 257 51C212 51 169 75 169 164V299C169 366 169 413 172 444C156 441 128 437 101 433C75 430 50 427 29 426V403L57 397C82 391 90 386 90 333V137C90 29 147 -12 214 -12C241 -12 262 -4 291 13S342 48 365 65V-6L371 -12C390 -7 415 1 441 8C468 15 496 21 518 24V50Z"/></g><g transform="matrix(.013,0,0,-0.013,55.22,0)"><path id="g190-74" d="M303 0V28C221 34 213 39 213 125V525C213 610 221 616 303 622V650H38V622C120 616 128 610 128 525V125C128 40 120 34 38 28V0H303Z"/></g><g transform="matrix(.0091,0,0,-0.0091,59.77,3.132)"><path id="g50-55" d="M141 347C171 480 264 541 327 570C364 587 403 599 436 605L429 641C389 634 339 622 300 609C191 570 37 458 37 239C37 86 126 -12 245 -12C367 -12 454 89 454 210C454 314 380 397 272 397C252 397 230 390 208 380L141 347ZM231 338C323 338 366 257 366 174C366 108 340 27 263 27C180 27 129 123 129 244C129 268 130 292 135 310C158 323 193 338 231 338Z"/></g></svg> and standard perovskite <svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.2911pt" id="M2" height="12.599pt" version="1.1" viewBox="-0.0498162 -9.3079 71.7271 12.599" width="71.7271pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g190-68"/></g><g transform="matrix(.013,0,0,-0.013,8.645,0)"><path id="g190-73" d="M729 650H468V622C546 615 554 610 554 527V365H213V527C213 610 221 616 297 622V650H38V622C120 616 128 611 128 527V123C128 39 120 34 40 28V0H303V28C221 34 213 40 213 123V322H554V123C554 39 546 34 460 28V0H728V28C647 34 639 39 639 123V527C639 610 647 615 729 622V650Z"/></g><g transform="matrix(.0091,0,0,-0.0091,18.673,3.132)"><path id="g50-52" d="M290 377C321 398 342 415 358 430C378 450 389 473 389 502C389 578 329 635 238 635H237C184 635 137 610 109 578L64 515L88 493C112 529 154 573 208 573S303 542 303 482C303 409 233 370 141 341L149 308C165 313 190 319 215 319C272 319 341 283 341 193C342 98 292 43 222 43C163 43 122 72 96 94C88 101 79 100 70 94C61 87 47 73 46 60C44 47 48 37 62 23C76 10 118 -12 165 -12C238 -12 430 62 430 223C430 297 379 359 290 375V377Z"/></g><g transform="matrix(.013,0,0,-0.013,23.619,0)"><path id="g190-79" d="M719 650H483V622C553 619 576 606 581 560C585 532 588 487 588 394V148H585L167 650H20V622C67 618 88 610 109 585C127 562 129 557 129 484V264C129 173 126 124 123 93C118 44 92 31 35 28V0H272V28C204 32 181 44 176 95C173 124 170 172 170 264V515H172L598 -9H629V394C629 487 631 532 635 563C639 606 663 619 719 622V650Z"/></g><g transform="matrix(.013,0,0,-0.013,33.278,0)"><use xlink:href="#g190-73"/></g><g transform="matrix(.0091,0,0,-0.0091,43.31,3.132)"><use xlink:href="#g50-52"/></g><g transform="matrix(.013,0,0,-0.013,48.256,0)"><path id="g190-81" d="M46 650V622C120 617 128 613 128 525V125C128 42 120 34 40 28V0H311V28C221 34 212 39 212 124V281L286 262C297 261 316 261 331 263C429 275 526 338 526 468C526 533 501 579 462 609C422 638 364 650 293 650H46ZM212 559C212 588 215 600 223 606C230 613 251 618 279 618C361 618 430 572 430 464C430 337 350 302 285 302C252 302 225 309 212 314V559Z"/></g><g transform="matrix(.013,0,0,-0.013,55.575,0)"><path id="g190-99" d="M152 404V712C115 698 54 683 7 677V654C71 648 73 642 73 579V24C128 -2 179 -12 220 -12C353 -12 471 92 471 238C471 357 381 449 274 449C262 449 249 446 233 439L152 404ZM152 374C170 384 202 393 230 393C313 393 382 326 382 213C382 97 330 26 246 26C194 26 165 62 158 81C154 91 152 101 152 116V374Z"/></g><g transform="matrix(.013,0,0,-0.013,62.179,0)"><use xlink:href="#g190-74"/></g><g transform="matrix(.0091,0,0,-0.0091,66.681,3.132)"><use xlink:href="#g50-52"/></g></svg> as an active layer. The results show that the power conversion efficiency obtained in the case of <svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.29107pt" id="M3" height="12.5794pt" version="1.1" viewBox="-0.0498162 -9.28833 64.8495 12.5794" width="64.8495pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-41"/></g><g transform="matrix(.013,0,0,-0.013,4.498,0)"><use xlink:href="#g190-71"/></g><g transform="matrix(.013,0,0,-0.013,10.357,0)"><use xlink:href="#g190-66"/></g><g transform="matrix(.013,0,0,-0.013,19.4,0)"><use xlink:href="#g113-42"/></g><g transform="matrix(.0091,0,0,-0.0091,23.898,3.132)"><use xlink:href="#g50-51"/></g><g transform="matrix(.013,0,0,-0.013,28.844,0)"><use xlink:href="#g190-67"/></g><g transform="matrix(.013,0,0,-0.013,36.384,0)"><use xlink:href="#g190-106"/></g><g transform="matrix(.013,0,0,-0.013,39.868,0)"><use xlink:href="#g190-68"/></g><g transform="matrix(.013,0,0,-0.013,48.317,0)"><use xlink:href="#g190-118"/></g><g transform="matrix(.013,0,0,-0.013,55.22,0)"><use xlink:href="#g190-74"/></g><g transform="matrix(.0091,0,0,-0.0091,59.77,3.132)"><use xlink:href="#g50-55"/></g></svg> is 24.98%, while in the case of <span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.2911pt" id="M4" height="12.599pt" version="1.1" viewBox="-0.0498162 -9.3079 71.7271 12.599" width="71.7271pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g190-68"/></g><g transform="matrix(.013,0,0,-0.013,8.645,0)"><use xlink:href="#g190-73"/></g><g transform="matrix(.0091,0,0,-0.0091,18.673,3.132)"><use xlink:href="#g50-52"/></g><g transform="matrix(.013,0,0,-0.013,23.619,0)"><use xlink:href="#g190-79"/></g><g transform="matrix(.013,0,0,-0.013,33.278,0)"><use xlink:href="#g190-73"/></g><g transform="matrix(.0091,0,0,-0.0091,43.31,3.132)"><use xlink:href="#g50-52"/></g><g transform="matrix(.013,0,0,-0.013,48.256,0)"><use xlink:href="#g190-81"/></g><g transform="matrix(.013,0,0,-0.013,55.575,0)"><use xlink:href="#g190-99"/></g><g transform="matrix(.013,0,0,-0.013,62.179,0)"><use xlink:href="#g190-74"/></g><g transform="matrix(.0091,0,0,-0.0091,66.681,3.132)"><use xlink:href="#g50-52"/></g></svg>,</span> it is reported as 26.42%. This indicates that the hybrid organic-inorganic double perovskite <svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.29107pt" id="M5" height="12.5794pt" version="1.1" viewBox="-0.0498162 -9.28833 64.8495 12.5794" width="64.8495pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-41"/></g><g transform="matrix(.013,0,0,-0.013,4.498,0)"><use xlink:href="#g190-71"/></g><g transform="matrix(.013,0,0,-0.013,10.357,0)"><use xlink:href="#g190-66"/></g><g transform="matrix(.013,0,0,-0.013,19.4,0)"><use xlink:href="#g113-42"/></g><g transform="matrix(.0091,0,0,-0.0091,23.898,3.132)"><use xlink:href="#g50-51"/></g><g transform="matrix(.013,0,0,-0.013,28.844,0)"><use xlink:href="#g190-67"/></g><g transform="matrix(.013,0,0,-0.013,36.384,0)"><use xlink:href="#g190-106"/></g><g transform="matrix(.013,0,0,-0.013,39.868,0)"><use xlink:href="#g190-68"/></g><g transform="matrix(.013,0,0,-0.013,48.317,0)"><use xlink:href="#g190-118"/></g><g transform="matrix(.013,0,0,-0.013,55.22,0)"><use xlink:href="#g190-74"/></g><g transform="matrix(.0091,0,0,-0.0091,59.77,3.132)"><use xlink:href="#g50-55"/></g></svg> has the ability to replace hybrid organic-inorganic perovskite <svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.2911pt" id="M6" height="12.599pt" version="1.1" viewBox="-0.0498162 -9.3079 71.7271 12.599" width="71.7271pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g190-68"/></g><g transform="matrix(.013,0,0,-0.013,8.645,0)"><use xlink:href="#g190-73"/></g><g transform="matrix(.0091,0,0,-0.0091,18.673,3.132)"><use xlink:href="#g50-52"/></g><g transform="matrix(.013,0,0,-0.013,23.619,0)"><use xlink:href="#g190-79"/></g><g transform="matrix(.013,0,0,-0.013,33.278,0)"><use xlink:href="#g190-73"/></g><g transform="matrix(.0091,0,0,-0.0091,43.31,3.132)"><use xlink:href="#g50-52"/></g><g transform="matrix(.013,0,0,-0.013,48.256,0)"><use xlink:href="#g190-81"/></g><g transform="matrix(.013,0,0,-0.013,55.575,0)"><use xlink:href="#g190-99"/></g><g transform="matrix(.013,0,0,-0.013,62.179,0)"><use xlink:href="#g190-74"/></g><g transform="matrix(.0091,0,0,-0.0091,66.681,3.132)"><use xlink:href="#g50-52"/></g></svg> to expand next-generation lead-free harmless materials for solar cell applications.

Syed Sajjad Hussain

Saira Riaz

Ghazi Aman Nowsherwan

Khizer Jahangir

Akram Raza

Muhammad Javaid Iqbal

Imran Sadiq

Syed Mutahir Hussain

Shahzad Naseem

Numerical Modeling and Optimization of Lead-Free Hybrid Double Perovskite Solar Cell by Using SCAPS-1D

Journal of Renewable Energy

Retracted: Microalgae as a Renewable Source of Energy: A Niche Opportunity

In developing countries, energy demand from biomass has increased due to exponential population growth. This has translated into voluminous quantities of wood being used. The situation is exacerbated by the popular use of inefficient stoves with low thermal insulation, hence contributing to deforestation. In this study, the performance of a cooking stove improved with sawdust as an insulation material was assessed. An insulated fire stove prototype of 26&#x2009;cm saucepan diameter was designed, constructed, and cast with sawdust and clay in a ratio of 1&#x2009;:&#x2009;1 (as the first layer) and sawdust alone as the second layer. The developed stove was tested using a water boiling test to establish its operating performance. The thermal efficiency of the stove was assessed using indigenous wood fuels used in rural Uganda (<i>Senna spectabilis</i>, <i>Pinus caribaea</i>, and <i>Eucalyptus grandis</i>). Computational fluid dynamics was used to simulate the temperature and velocity fields within the combustion chamber and for generating temperature contours of the stove. Obtained results indicated that <i>S. spectabilis</i> had the highest thermal efficiency of 35.5&#x2009;&#xb1;&#x2009;2.5&#x0025;, followed by <i>E. grandis</i> (25.7&#x2009;&#xb1;&#x2009;1.7&#x0025;) and lastly <i>P. caribaea</i> (19.0&#x2009;&#xb1;&#x2009;1.2&#x0025;) in the cold start phase when compared with traditional stoves. The stove remained cold as hot air was restricted to the combustion chamber with decreasing temperature contours toward the outer wall up to the ambient temperature. The velocity flow remained constant as the chamber was colored green throughout due to the shielding of the stove with sawdust as insulation. The heat flux generated indicated that a thick layer of 6&#x2009;cm or more could ensure good insulation, and this could be further reduced by introducing more sawdust. The designed stove has the potential to reduce biomass consumption and emissions when compared to traditional cookstoves. The inclusion of a chimney draught in the fire stove prototype could reduce smoke and increase thermal efficiency. Further studies should focus on minimizing the thickness of the clay-sawdust (first) layer and increasing the thickness of the sawdust layer to reduce the weight of the fire stove.

Jasper Okino

Allan John Komakech

Joshua Wanyama

Herbert Ssegane

Elly Olomo

Timothy Omara

Performance Characteristics of a Cooking Stove Improved with Sawdust as an Insulation Material

The agenda to utilize and efficiently convert biomass has been raised to alleviate environmental problems and pressure on the reliance on fossil fuel. Intermediate pyrolysis has the ability to treat different biomasses and coproduction of biooil and adsorption biochar. This review article aims to evaluate the appropriateness of intermediate pyrolysis for the coproduction of biooil and adsorption biochar. It was observed that coproduced biooil is of high quality, stable, and miscible that can be used directly to existing engines or be easily blended. The biochar coproduced is good for adsorption but is not stable for microbial attack and hence unsuitable in soil treatment but for hydrometallurgy. Since the process is capable of treating waste biomass, it is an opportunity for further investigations in areas where wastes are plenty and less utilized. To increase the effectiveness of this technology for coproduction, optimizing parameters, design of efficient reactors, and use of catalyst must be worked upon.

Deodatus Kazawadi

Justin Ntalikwa

Godlisten Kombe

A Review of Intermediate Pyrolysis as a Technology of Biomass Conversion for Coproduction of Biooil and Adsorption Biochar

This paper presents an optimal design of a hybrid wind turbine/PV/battery energy system for a household application using a multiobjective optimization approach, namely, particle swarm optimization (PSO). The ultimately optimal component selection of the hybrid renewable energy system (HRES) is suggested by comprehensively investigating the effects of various factors on the cost-reliability relation, such as the mounting orientation, temperature on the PV modules, wind turbine hub height, different types of batteries, and different load profiles. The optimization results show the feasibility of HRES for a single-family household demand in the arctic region of Troms&#x00F8;, Norway. As we will discuss in the results, an HRES operating in such a region can achieve great energy-autonomous levels at a reasonable cost partially thanks to the cold climate. The mounting structure and temperature effects on the PV modules and the battery type can significantly change the system performance in terms of cost and reliability, while a higher wind turbine hub offers little improvement. The result suggests an optimal HRES consisting of a wind turbine with a swept area of 21&#x2009;m<sup>2</sup> and a hub height of 12&#x2009;m, a PV system of 12&#x2009;m<sup>2</sup> with 2-axis tracking, and a battery bank of 3&#x2009;kWh. This system will achieve 98.2&#x0025; in self-reliance. Assuming that the system lifetime is 20 years, the annual cost is about 900 USD. Even though this study focuses on an HRES for a single-family application in the arctic, such an approach can be extended for other applications and in other geographical areas.

Thanh-Tuan Nguyen

Tobias Bostr&#xf6;m

Multiobjective Optimization of a Hybrid Wind/Solar Battery Energy System in the Arctic

The objective of this research work is to assess the wind characteristics and wind power potential of Gharo site. The wind parameters of the site have been used to calculate the wind power density, annual energy yield, and capacity factors at 10, 30, and 50&#x2009;m. The wind frequency distribution including seasonal as well as percentage of seasonal frequency distribution has been investigated to determine accurately the wind power of the site. The coefficient of variation is calculated at three different heights. Also, economic assessment per kWh of energy has been carried out. The site-specific annual mean wind speeds were 6.89, 5.85, and 3.85&#x2009;m/s at 50, 30, and 10&#x2009;m heights with corresponding standard deviations of 2.946, 2.489, and 2.040. The mean values of the Weibull <i>k</i> parameter are estimated as 2.946, 2.489, and 2.040 while those of scale parameter are estimated as 7.634, 6.465, and 4.180&#x2009;m/s at 50, 30, and 10&#x2009;m, respectively. The respective mean wind power and energy density values are found to be 118.3, 92.20, and 46.10&#x2009;W/m<sup>2</sup> and 1036.6, 807.90, and 402.60&#x2009;kWh/m<sup>2</sup>. As per cost estimation of wind turbines, the wind turbine WT-C has the lowest cost of US$ Cents 0.0346/kWh and highest capacity factors of 0.3278 (32.78&#x0025;). Wind turbine WT-C is recommended for this site for the wind farm deployment due to high energy generation and minimum price of energy. The results show the appropriateness of the methodology for assessing the wind speed and economic assessment at the lowest price of energy.

Zahid Hussain Hulio

Assessment of Wind Characteristics and Wind Power Potential of Gharo, Pakistan

About this journal

<p><em>Journal of Renewable Energy</em> publishes papers relating to the science and technology of renewable energy generation, distribution, storage, and management. It also covers the environmental, societal, and economic impacts of renewable energy.</p>


Journal profile

Meet the editorial board

<p><em>Journal of Renewable Energy</em> maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.</p>


Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

Journal of Renewable Energy - Table of contents 2021

title

Journal of Renewable Energy publishes papers relating to the science and technology of renewable energy generation, distribution, storage, and management. It also covers the environmental, societal, and economic impacts of renewable energy.

Journal of Renewable Energy