Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2008, Article ID 782764, 7 pages
http://dx.doi.org/10.1155/2008/782764
Research Article

Micro-Optoelectromechanical Tilt Sensor

1Holistic Electronics Research Lab, ECE Department, University of Cyprus, 1678 Nicosia, Cyprus
2Institute of Biomedical Engineering, Imperial College London, London SW7 2AZ, UK

Received 19 February 2008; Accepted 19 April 2008

Academic Editor: Ignacio Matias

Copyright © 2008 Timothy G. Constandinou and Julius Georgiou. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Bretterklieber, H. Zangl, and G. Brasseur, “Impacts on the accuracy of a capacitive inclination sensor,” in Proceedings of the 21st IEEE Instrumentation and Measurement Technology Conference (IMTC '04), vol. 3, pp. 2315–2319, Como, Italy, May 2004. View at Publisher · View at Google Scholar
  2. R. A. Yotter, R. R. Baxter, S. Ohno, S. D. Hawley, and D. M. Wilson, “On a micromachined fluidic inclinometer,” in Proceedings of the 12th IEEE International Conference on Transducers, Solid-State Sensors, Actuators and Microsystems, vol. 2, pp. 1279–1282, Boston, Mass, USA, June 2003. View at Publisher · View at Google Scholar
  3. I.-S. Kang, H. Jung, D.-S. Kim et al., “Design and fabrication of a MEMS-based electrolytic tilt sensor,” in Proceedings of the International Microprocesses and Nanotechnology Conference, pp. 216–217, Tokyo, Japan, October 2005.
  4. L. Zhao and E. Yeatman, “Micro capacitive tilt sensor for human body movement detection,” in Proceedings of the 4th International Workshop on Wearable and Implantable Body Sensor Networks (BSN '07), vol. 13, pp. 195–200, Aachen, Germany, March 2007. View at Publisher · View at Google Scholar
  5. D. Lapadatu, S. Habibi, B. Reppen, G. Salomonsen, and T. Kvisteroy, “Dual-axes capacitive inclinometer/low-g accelerometer for automotive applications,” in Proceedings of the 14th IEEE International Conference on Micro Electro Mechanical Systems (MEMS '01), pp. 34–37, Interlaken, Switzerland, January 2001. View at Publisher · View at Google Scholar
  6. S. Luczak, W. Oleksiuk, and M. Bodnicki, “Sensing tilt with MEMS accelerometers,” IEEE Sensors Journal, vol. 6, no. 6, pp. 1669–1675, 2006. View at Publisher · View at Google Scholar
  7. S. Billat, H. Glosch, M. Kunze et al., “Convection-based micromachined inclinometer using SOI technology,” in Proceedings of the 14th IEEE International Conference on Micro Electro Mechanical Systems (MEMS '01), pp. 159–161, Interlaken, Switzerland, January 2001. View at Publisher · View at Google Scholar
  8. N. C. Tien, “Micro-optical inertial sensors using silicon MEMS,” in Proceedings of the IEEE Aerospace Conference, vol. 1, pp. 437–443, Snowmass, Colo, USA, March 1998. View at Publisher · View at Google Scholar
  9. T. G. Constandinou, J. Georgiou, and C. Toumazou, “Nano-power mixed-signal tunable edge-detection circuit for pixel-level processing in next generation vision systems,” Electronics Letters, vol. 39, no. 25, pp. 1774–1776, 2003. View at Publisher · View at Google Scholar
  10. T. G. Constandinou and C. Toumazou, “A micropower centroiding vision processor,” IEEE Journal of Solid-State Circuits, vol. 41, no. 6, pp. 1430–1443, 2006. View at Publisher · View at Google Scholar
  11. Y. Zhao, “Stiction and anti-stiction in MEMS and NEMS,” Acta Mechanica Sinica, vol. 19, no. 1, pp. 1–10, 2003. View at Google Scholar