Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2014, Article ID 801618, 11 pages
http://dx.doi.org/10.1155/2014/801618
Research Article

Research on Nonlinear Dynamics of Drive Mode in Z-Axis Silicon Microgyroscope

1School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
2Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology of Ministry of Education, Southeast University, Nanjing 210096, China

Received 15 May 2014; Accepted 21 July 2014; Published 11 August 2014

Academic Editor: Ignacio R. Matias

Copyright © 2014 Lu Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Wang, L. Huang, and B. Yang, Weiguanxing yibiao yu weixitong, Weapon Industry Press, Beijing, China, 2011.
  2. N. Yazdi, F. Ayazi, and K. Najafi, “Micromachined inertial sensors,” Proceedings of the IEEE, vol. 86, no. 8, pp. 1640–1658, 1998. View at Publisher · View at Google Scholar · View at Scopus
  3. A. M. Shkel, C. Acar, and C. Painter, “Two types of micromachined vibratory gyroscopes,” in Proceedings of the 4th IEEE Conference on Sensors, pp. 531–536, Irvine, Calif, USA, November 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. A. M. Shkel, “Micromachined gyroscopes: challenges, design solutions, and opportunities,” in Smart Structures and Materials: Smart Electronics and MEMS, vol. 4334 of Proceedings of SPIE, pp. 74–85, Newport Beach, Calif, USA, August 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. W. A. Clark, Micromachined vibratory rate gyroscopes [Ph.D. thesis in Engineering-Electrical Engineering and Computer Science], University of California, Berkeley, Calif, USA, 1997.
  6. W. Geiger, J. Bartholomeyczik, U. Breng et al., “MEMS IMU for AHRS applications,” in Proceedings of the IEEE/ION Position, Location and Navigation Symposium (PLANS '08), pp. 225–231, May 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Sharma, F. M. Zaman, B. V. Amini, and F. Ayazi, “A high-Q in-plane SOI tuning fork gyroscope,” Proceedings of IEEE Sensors, vol. 1, pp. 467–470, 2004. View at Publisher · View at Google Scholar
  8. A. Sharma, M. F. Zaman, and F. Ayazi, “A sub-0.2°/hr bias drift micromechanical silicon gyroscope with automatic CMOS mode-matching,” IEEE Journal of Solid-State Circuits, vol. 44, no. 5, pp. 1593–1608, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. F. Braghin, F. Resta, E. Leo, and G. Spinola, “Nonlinear dynamics of vibrating MEMS,” Sensors and Actuators, A: Physical, vol. 134, no. 1, pp. 98–108, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. A. M. Elshurafa, K. Khirallah, H. H. Tawfik, A. Emira, A. K. S. Abdel Aziz, and S. M. Sedky, “Nonlinear dynamics of spring softening and hardening in folded-mems comb drive resonators,” Journal of Microelectromechanical Systems, vol. 20, no. 4, Article ID 5772897, pp. 943–958, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. R. M. C. Mestrom, R. H. B. Fey, K. L. Phan, and H. Nijmeijer, “Simulations and experiments of hardening and softening resonances in a clamped-clamped beam MEMS resonator,” Sensors and Actuators, A: Physical, vol. 162, no. 2, pp. 225–234, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. R. M. C. Mestrom, R. H. B. Fey, J. T. M. van Beek, K. L. Phan, and H. Nijmeijer, “Modelling the dynamics of a MEMS resonator: simulations and experiments,” Sensors and Actuators A: Physical, vol. 142, no. 1, pp. 306–315, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Palaniapan and L. Khine, “Nonlinear behavior of SOI free-free micromechanical beam resonator,” Sensors and Actuators, A: Physical, vol. 142, no. 1, pp. 203–210, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Veijola and T. Mattila, “Modeling of nonlinear micromechanical resonators and their simulation with the harmonic-balance method,” International Journal of RF and Microwave Computer-Aided Engineering, vol. 11, no. 5, pp. 310–321, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Yang, B. Zhou, S. Wang, L. Huang, and Y. Yin, “A quadrature error and offset error suppression circuitry for Silicon Micro-Gyroscope,” in Proceedings of the 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS '08), pp. 422–426, January 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Yin, S. Wang, C. Wang, and P. Sheng, “Structural scheme design and simulation of structure-decoupled dual-mass MEMS gyroscope,” Journal of Southeast University, vol. 38, no. 5, pp. 918–922, 2008. View at Google Scholar · View at Scopus
  17. Y. Ni, H. Li, L. Huang, and L. Zhao, “Design and test of quadrature correction structure for silicon micro-gyroscope,” Journal of Southeast University: Natural Science Edition, vol. 43, pp. 1227–1231, 2013. View at Google Scholar
  18. W. Zhang, G. Meng, and D. Chen, “Stability, nonlinearity and reliability of electrostatically actuated MEMS devices,” Sensors, vol. 7, no. 5, pp. 760–796, 2007. View at Publisher · View at Google Scholar · View at Scopus