Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2014, Article ID 952323, 7 pages
http://dx.doi.org/10.1155/2014/952323
Research Article

Analysis on Structural Stress of 64 × 64 InSb IRFPAs with Temperature Dependent Elastic Underfill

1School of Electrical Engineering, Henan University of Science and Technology, Luoyang 471023, China
2Luoyang Institute of Electro-Optical Equipment, Aviation Industry Corporation of China, Luoyang 471009, China

Received 6 May 2014; Revised 7 August 2014; Accepted 7 August 2014; Published 26 August 2014

Academic Editor: Laurent Francis

Copyright © 2014 Liwen Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Gau, L. Dai, S. Yang et al., “256×256 InSb focal plane arrays,” Proceedings of SPIE, vol. 4078, pp. 467–479, 2000. View at Google Scholar
  2. L. W. Zhang, M. Shao, X. L. Zhang, Q. D. Meng, J. C. Wang, and Y. Q. Lv, “Three-dimensional modeling and simulation of large format hybrid indium antimonide detector arrays,” Optical Engineering, vol. 52, no. 10, Article ID 103110, 2013. View at Google Scholar
  3. L. W. Zhang, M. Y. Xu, M. Shao, Q. Yu, and J. C. Zhao, “Finite element analysis on structural stress of 32 x 32 InSB focal plane arrays integrated with microlens arrays,” Journal of Convergence Information Technology, vol. 7, no. 13, pp. 93–100, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. V. Gektin, A. Bar-Cohen, and J. Ames, “Coffin-Manson fatigue model of underfilled flip-chips,” IEEE Transactions on Components Packaging and Manufacturing Technology A, vol. 20, no. 3, pp. 317–326, 1997. View at Publisher · View at Google Scholar · View at Scopus
  5. J. H. Lau and C. Chang, “Characterization of underfill materials for functional solder bumped flip chips on board applications,” IEEE Transactions on Components and Packaging Technologies, vol. 22, no. 1, pp. 111–119, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. Zhang and C. P. Wong, “Recent advances in flip-chip underfill: materials, process, and reliability,” IEEE Transactions on Advanced Packaging, vol. 27, no. 3, pp. 515–524, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. G. M. Cao, D. F. Geng, S. L. Xu et al., “Stress-limited nonuniformity of InSb focal plane array detectors,” Infrared and Laser Enginering, vol. 36, pp. 67–69, 2007. View at Google Scholar
  8. H. Yuan, G. Apgar, J. Kim et al., “FPA development: from InGaAs, InSb, to HgCdTe,” in Infrared Technology and Applications XXXIV, vol. 6940 of Proceedings of SPIE, May 2008. View at Publisher · View at Google Scholar
  9. Q. Meng, Q. Yu, L. Zhang, and Y. Lü, “Mechanical parameters selection in InSb focal plane array detector normal direction,” Acta Physica Sinica, vol. 61, no. 22, Article ID 226103, 2012. View at Google Scholar · View at Scopus
  10. A. Zabihollah and S. Zareie, “Optimal design of adaptive laminated beam using layerwise finite element,” Journal of Sensors, vol. 2011, Article ID 240341, 8 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. Q. Meng, X. Zhang, and W. Sun, “Finite element analysis on structural stress of 8×8 InSb infrared focal plane array,” Applied Mechanics and Materials, vol. 34-35, pp. 207–211, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. L. Liu, S. Yi, L. S. Ong, and K. S. Chian, “Finite element analysis for microwave cure of underfill in flip chip packaging,” Thin Solid Films, vol. 462-463, pp. 436–445, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. P. Hegde, A. R. Ochana, D. C. Whalley, and V. V. Silberschmidt, “Finite element analysis of lead-free surface mount devices,” Computational Materials Science, vol. 43, no. 1, pp. 212–220, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. Q. D. Meng, X. L. Zhang, L. W. Zhang, and Q. Yu, “Effects of isolation trough depth on infrared focal plane array detector structural stress,” Aero Weaponry, no. 3, pp. 33–36, 2012. View at Google Scholar
  15. W. Jong, S. Chen, H. Tsai, C. Chiu, and H. Chang, “The geometrical effects of bumps on the fatigue life of flip-chip packages by taguchi method,” Journal of Reinforced Plastics and Composites, vol. 25, no. 1, pp. 99–114, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Gonzalez, B. Vandevelde, J. Vanfleteren, and D. Manessis, “Thermo-mechanical FEM analysis of lead free and lead containing solder for flip chip applications,” in Proceedings of the 15th European Microelectronics and Packaging, pp. 440–445, Brugge, Belgium, June 2005.
  17. L. Zhang, J. Wang, Q. Yu, and Q. Meng, “Finite element analysis on structural stress of 16×16 InSb IRFPA with viscoelastic underfill,” Advanced Materials Research, vol. 314-316, pp. 530–534, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. He, B. E. Moreira, A. Overson, S. H. Nakamura, C. Bider, and J. F. Briscoe, “Thermal characterization of an epoxy-based underfill material for flip chip packaging,” Thermochimica Acta, vol. 357-358, no. 14, pp. 1–8, 2000. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Chen, Q. Zhang, G. Z. Wang, X. M. Xie, and Z. N. Cheng, “Thermal cycle failure of SnPb soldered joints for flip chip package and effects of underfill material,” Pan Tao Ti Hsueh Pao/Chinese Journal of Semiconductors, vol. 22, no. 1, pp. 107–112, 2001. View at Google Scholar · View at Scopus
  20. Q. D. Meng, X. L. Zhang, and L. W. Zhang, “Analysis of structural stress in InSb array detector without underfill,” Journal of Computers, vol. 7, no. 8, pp. 1998–2006, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. R. W. Chang and F. P. McCluskey, “Constitutive relations of indium in extreme-temperature electronic packaging based on anand model,” Journal of Electronic Materials, vol. 38, no. 9, pp. 1855–1859, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. X. Cheng, C. Liu, and V. V. Silberschmidt, “Numerical analysis of response of indium micro-joint to low-temperature cycling,” Computational Materials Science, vol. 52, no. 1, pp. 274–281, 2012. View at Publisher · View at Google Scholar
  23. D. F. Gibbons, “Thermal expansion of some crystals with the diamond structure,” Physical Review, vol. 112, no. 1, pp. 136–140, 1958. View at Publisher · View at Google Scholar · View at Scopus