Research Article
Geometry Optimization Approaches of Inductively Coupled Printed Spiral Coils for Remote Powering of Implantable Biomedical Sensors
Table 1
Design parameters limited by implant and fabrication technology.
| Parameters | Value |
| Secondary coil outer diameter ) | 20 (mm) | Distance between coils () | 30 (mm) | Minimum coils inner diameters ( and ) | 5 (mm) | Minimum width of conductor () | 150 (m) | Minimum spacing between conductors () | 150 (m) | Operating frequency () | 13.56 (MHz) | Substrate thickness () | 1.5 (mm) | Conductor thickness () | 38 (m) |
|
|
The conductor is copper on FR4 printed circuit board.
|