Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2018 (2018), Article ID 4125752, 10 pages
https://doi.org/10.1155/2018/4125752
Research Article

Self-Powered Wireless Sensor Network for Automated Corrosion Prediction of Steel Reinforcement

1Tongji University, Shanghai, China
2Embry Riddle Aeronautical University, Daytona Beach, FL, USA
3Lamar University, Beaumont, TX, USA

Correspondence should be addressed to Ye Xia

Received 25 July 2017; Revised 31 October 2017; Accepted 16 November 2017; Published 8 January 2018

Academic Editor: Young-Jin Cha

Copyright © 2018 Dan Su et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. D. Cady, “Chapter 19—corrosion of reinforcing steel,” in Significance of Tests and Properties of Concrete and Concrete-Making Materials, pp. 275–275-25, ASTM International, West Conshohocken, PA, USA, 1978. View at Publisher · View at Google Scholar
  2. Y. Xia, H. Nassif, and D. Su, “Early-age cracking in high performance concrete decks of a curved steel girder bridge,” Journal of Aerospace Engineering, vol. 30, no. 2, article B4016003, 2017. View at Publisher · View at Google Scholar
  3. S. Ahmad, “Reinforcement corrosion in concrete structures, its monitoring and service life prediction—a review,” Cement and Concrete Composites, vol. 25, no. 4-5, pp. 459–471, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. N. S. Berke, V. Chaker, and D. Whiting, Corrosion Rates in Steel in Concrete, ASTM, West Conshohocken, PA, USA, 1990. View at Publisher · View at Google Scholar
  5. H. Böhni, Ed., Corrosion in Reinforced Concrete Structures, Elsevier, 2005.
  6. M. Raupach, “Chloride-induced macrocell corrosion of steel in concrete—theoretical background and practical consequences,” Construction and Building Materials, vol. 10, no. 5, pp. 329–338, 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Pourbaix, “Applications of electrochemistry in corrosion science and in practice,” Corrosion Science, vol. 14, no. 1, pp. 25–82, 1974. View at Publisher · View at Google Scholar · View at Scopus
  8. P. R. Vassie and M. McKenzie, “Electrode potentials for on-site monitoring of atmospheric corrosion of steel,” Corrosion Science, vol. 25, no. 1, pp. 1–13, 1985. View at Publisher · View at Google Scholar · View at Scopus
  9. G. K. Glass, C. L. Page, N. R. Short, and S. W. Yu, “An investigation of galvanostatic transient methods used to monitor the corrosion rate of steel in concrete,” Corrosion Science, vol. 35, no. 5–8, pp. 1585–1592, 1993. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Baronio, M. Berra, L. Bertolini, and T. Pastore, “Steel corrosion monitoring in normal and total-lightweight concretes exposed to chloride and sulphate solutions part I: potential measurements,” Cement and Concrete Research, vol. 26, no. 5, pp. 683–689, 1996. View at Publisher · View at Google Scholar · View at Scopus
  11. G. A. El-Mahdy, A. Nishikata, and T. Tsuru, “Electrochemical corrosion monitoring of galvanized steel under cyclic wet–dry conditions,” Corrosion Science, vol. 42, no. 1, pp. 183–194, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Elsener, “Macrocell corrosion of steel in concrete – implications for corrosion monitoring,” Cement and Concrete Composites, vol. 24, no. 1, pp. 65–72, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. M. F. Montemor, A. M. P. Simões, and M. G. S. Ferreira, “Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques,” Cement and Concrete Composites, vol. 25, no. 4-5, pp. 491–502, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Sathiyanarayanan, P. Natarajan, K. Saravanan, S. Srinivasan, and G. Venkatachari, “Corrosion monitoring of steel in concrete by galvanostatic pulse technique,” Cement and Concrete Composites, vol. 28, no. 7, pp. 630–637, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. H. W. Song and V. Saraswathy, “Corrosion monitoring of reinforced concrete structures-a,” International Journal of Electrochemical Science, vol. 2, pp. 1–28, 2007. View at Google Scholar
  16. M. Fregonese, H. Idrissi, H. Mazille, L. Renaud, and Y. Cetre, “Initiation and propagation steps in pitting corrosion of austenitic stainless steels: monitoring by acoustic emission,” Corrosion Science, vol. 43, no. 4, pp. 627–641, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. M. S. Weng, S. E. Dunn, W. H. Hartt, and R. P. Brown, “Application of acoustic emission to detection of reinforcing steel corrosion in concrete,” Corrosion, vol. 38, no. 1, pp. 9–14, 1982. View at Publisher · View at Google Scholar
  18. P. Ziehl and M. ElBatanouny, “Acoustic emission monitoring for corrosion damage detection and classification,” Corrosion of Steel in Concrete Structures, pp. 193–209, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Qiao and J. Ou, “Corrosion monitoring of reinforcing steel in cement mortar by EIS and ENA,” Electrochimica Acta, vol. 52, no. 28, pp. 8008–8019, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. A. Nishikata, Q. Zhu, and E. Tada, “Long-term monitoring of atmospheric corrosion at weathering steel bridges by an electrochemical impedance method,” Corrosion Science, vol. 87, pp. 80–88, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Chen, F. Tang, Y. Tang, M. J. O’Keefe, and G. Chen, “Mechanism and sensitivity of Fe-C coated long period fiber grating sensors for steel corrosion monitoring of RC structures,” Corrosion Science, vol. 127, pp. 70–81, 2017. View at Publisher · View at Google Scholar
  22. S.-G. Dong, C.-J. Lin, R.-G. Hu, L.-Q. Li, and R.-G. Du, “Effective monitoring of corrosion in reinforcing steel in concrete constructions by a multifunctional sensor,” Electrochimica Acta, vol. 56, no. 4, pp. 1881–1888, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. G. S. Duffó and S. B. Farina, “Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures,” Construction and Building Materials, vol. 23, no. 8, pp. 2746–2751, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Legat, “Monitoring of steel corrosion in concrete by electrode arrays and electrical resistance probes,” Electrochimica Acta, vol. 52, no. 27, pp. 7590–7598, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Y. Li, Y.-G. Kim, S. Jung, H.-S. Song, and S.-M. Lee, “Application of steel thin film electrical resistance sensor for in situ corrosion monitoring,” Sensors and Actuators B: Chemical, vol. 120, no. 2, pp. 368–377, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. V. Maruthapandian, V. Saraswathy, and S. Muralidharan, “Development of solid state embeddable reference electrode for corrosion monitoring of steel in reinforced concrete structures,” Cement and Concrete Composites, vol. 74, pp. 100–108, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Muralidharan, V. Saraswathy, L. J. Berchmans, K. Thangavel, and K. Y. Ann, “Nickel ferrite (NiFe2O4): a possible candidate material as reference electrode for corrosion monitoring of steel in concrete environments,” Sensors and Actuators B: Chemical, vol. 145, no. 1, pp. 225–231, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. T. Parthiban, R. Ravi, and G. T. Parthiban, “Potential monitoring system for corrosion of steel in concrete,” Advances in Engineering Software, vol. 37, no. 6, pp. 375–381, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Poursaee, “Automatic system for monitoring corrosion of steel in concrete,” Advances in Engineering Software, vol. 40, no. 11, pp. 1179–1182, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. G. Qiao, G. Sun, Y. Hong, Y. Qiu, and J. Ou, “Remote corrosion monitoring of the RC structures using the electrochemical wireless energy-harvesting sensors and networks,” NDT and E International, vol. 44, no. 7, pp. 583–588, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. P.-A. Itty, M. Serdar, C. Meral et al., “In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste,” Corrosion Science, vol. 83, pp. 409–418, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Brenna, L. Lazzari, and M. Ormellese, “Monitoring chloride-induced corrosion of carbon steel tendons in concrete using a multi-electrode system,” Construction and Building Materials, vol. 96, pp. 434–441, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. A. Česen, T. Kosec, and A. Legat, “Characterization of steel corrosion in mortar by various electrochemical and physical techniques,” Corrosion Science, vol. 75, pp. 47–57, 2013. View at Publisher · View at Google Scholar · View at Scopus
  34. I. Martínez and C. Andrade, “Examples of reinforcement corrosion monitoring by embedded sensors in concrete structures,” Cement and Concrete Composites, vol. 31, no. 8, pp. 545–554, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. S. P. Karthick, S. Muralidharan, V. Saraswathy, and K. Thangavel, “Long-term relative performance of embedded sensor and surface mounted electrode for corrosion monitoring of steel in concrete structures,” Sensors and Actuators B: Chemical, vol. 192, pp. 303–309, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. L. Daigle, Z. Lounis, and D. Cusson, “Numerical prediction of early-age cracking and corrosion in high performance concrete bridges - case study,” in TAC Annual Conference 2004 - Transportation Innovation-Accelerating the Pace, pp. 1–20, Quebec City, QC, Canada, 2004.
  37. P. Goltermann, “Chloride ingress in concrete structures: extrapolation of observations,” ACI Materials Journal, vol. 100, no. 2, pp. 114–119, 2003. View at Publisher · View at Google Scholar
  38. Z. Lounis, “Probabilistic modeling of chloride contamination and corrosion of concrete bridge structures,” in Fourth International Symposium on Uncertainty Modeling and Analysis, 2003. ISUMA 2003, pp. 447–451, College Park, MD, USA, September 2003, IEEE. View at Publisher · View at Google Scholar · View at Scopus
  39. J. Paulsson-Tralla and J. Silfwerbrand, “Estimation of chloride ingress in uncracked and cracked concrete using measured surface concentrations,” ACI Materials Journal, vol. 99, no. 1, pp. 27–36, 2002. View at Publisher · View at Google Scholar
  40. T. Maruya, K. Hsu, H. Takeda, and S. Tangtermsirikul, “Numerical modeling of steel corrosion in concrete structures due to chloride ion, oxygen and water movement,” Journal of Advanced Concrete Technology, vol. 1, no. 2, pp. 147–160, 2003. View at Publisher · View at Google Scholar
  41. S. C. Kranc and A. A. Sagüés, “Calculation of extended counter electrode polarization effects on the electrochemical impedance response of steel in concrete,” in Electrochemical Impedance: Analysis and Interpretation, pp. 365–365-19, ASTM International, West Conshohocken, PA, USA, 1993. View at Publisher · View at Google Scholar
  42. S. C. Kranc and A. A. Sagüés, “Detailed modeling of corrosion macrocells on steel reinforcing in concrete,” Corrosion Science, vol. 43, no. 7, pp. 1355–1372, 2001. View at Publisher · View at Google Scholar · View at Scopus
  43. A. Sagüés, S. C. Kranc, and B. G. Washington, “Computer modeling of corrosion and corrosion protection of steel in concrete,” Concrete 2000-Economic and Durable Construction through Excellence, p. 1275, 1993. View at Google Scholar
  44. Y. L. Ding, H. W. Zhao, and A. Q. Li, “Temperature effects on strain influence lines and dynamic load factors in a steel-truss arch railway bridge using adaptive FIR filtering,” Journal of Performance of Constructed Facilities, vol. 31, no. 4, article 04017024, 2017. View at Publisher · View at Google Scholar
  45. B. Wei, G. L. Dai, Y. Wen, and Y. Xia, “Seismic performance of isolation system of rolling friction with springs,” Journal of Central South University, vol. 21, no. 4, pp. 1518–1525, 2014. View at Publisher · View at Google Scholar · View at Scopus
  46. K. Kobayashi and K. Shuttoh, “Oxygen diffusivity of various cementitious materials,” Cement and Concrete Research, vol. 21, no. 2-3, pp. 273–284, 1991. View at Publisher · View at Google Scholar · View at Scopus
  47. A. S. Sudjono and H. Seki, “Experimental and analytical studies on oxygen transport in various cementitious materials,” Special Publication, vol. 192, pp. 721–738, 2000. View at Google Scholar
  48. A. J. M. Siemes, C. Gehlen, A. Lindvall, A. Arteaga, and H. M. Ludwig, Statistical Quantification of the Variables in the Limit State Functions, Brite-Euram, Brussels, Belgium, 1999, Summary.
  49. T. Liu and R. W. Weyers, “Modeling the dynamic corrosion process in chloride contaminated concrete structures,” Cement and Concrete Research, vol. 28, no. 3, pp. 365–379, 1998. View at Publisher · View at Google Scholar
  50. K. A. T. Vu and M. G. Stewart, “Structural reliability of concrete bridges including improved chloride-induced corrosion models,” Structural Safety, vol. 22, no. 4, pp. 313–333, 2000. View at Publisher · View at Google Scholar · View at Scopus
  51. Y. J. Cha, W. Choi, and O. Büyüköztürk, “Deep learning-based crack damage detection using convolutional neural networks,” Computer-Aided Civil and Infrastructure Engineering, vol. 32, no. 5, pp. 361–378, 2017. View at Publisher · View at Google Scholar
  52. Y. J. Cha, K. You, and W. Choi, “Vision-based detection of loosened bolts using the Hough transform and support vector machines,” Automation in Construction, vol. 71, pp. 181–188, 2016. View at Publisher · View at Google Scholar · View at Scopus
  53. Y. Yu, G. Qiao, and J. Ou, “Self-powered wireless corrosion monitoring sensors and networks,” IEEE Sensors Journal, vol. 10, no. 12, pp. 1901-1902, 2010. View at Publisher · View at Google Scholar · View at Scopus
  54. G. Ye and K. Soga, “Energy harvesting from water distribution systems,” Journal of Energy Engineering, vol. 138, no. 1, pp. 7–17, 2011. View at Publisher · View at Google Scholar · View at Scopus
  55. A. García and M. N. Partl, “How to transform an asphalt concrete pavement into a solar turbine,” Applied Energy, vol. 119, pp. 431–437, 2014. View at Publisher · View at Google Scholar · View at Scopus
  56. S. J. Roundy, Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration to Electricity Conversion [Ph.D. thesis], University of California, Berkeley, Berkeley, CA, USA, 2003.
  57. F. U. Khan and I. Ahmad, “Review of energy harvesters utilizing bridge vibrations,” Shock and Vibration, vol. 2016, Article ID 1340402, 21 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  58. M. Rhimi and N. Lajnef, “Tunable energy harvesting from ambient vibrations in civil structures,” Journal of Energy Engineering, vol. 138, no. 4, pp. 185–193, 2012. View at Publisher · View at Google Scholar · View at Scopus
  59. V. Kumar and Remadevi, “Kriging of groundwater levels – a case study,” Journal of Spatial Hydrology, vol. 6, no. 1, 2006. View at Google Scholar
  60. R. J. Hyndman and Y. Khandakar, “Automatic time series forecasting: the forecast package for R,” Journal of Statistical Software, vol. 27, no. 3, 2008. View at Publisher · View at Google Scholar
  61. G. N. Flint and R. N. Cox, “The resistance of stainless steel partly embedded in concrete to corrosion by seawater,” Magazine of Concrete Research, vol. 40, no. 142, pp. 13–27, 1988. View at Publisher · View at Google Scholar
  62. N. Gartner, T. Kosec, and A. Legat, “Monitoring of the long-term performance of stainless steel reinforcement in saline environments,” BHM Berg- und Hüttenmännische Monatshefte, vol. 161, no. 1, pp. 44–49, 2016. View at Publisher · View at Google Scholar