Design and Development of a Flexible, Plug-and-Play, Cost-Effective Tool for on-Field Evaluation of Gas Sensors

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">User command</td><td class="align_center">Function</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">h</td><td class="align_center">It displays the “help” window, which summarizes all user commands and their syntax</td></tr><tr><td class="align_left">s</td><td class="align_center">It scans through the system ports to find devices plugged into, and it establishes the connection to them</td></tr><tr><td class="align_left">s, (seconds)</td><td class="align_center">It starts a new monitoring session featured by a sampling rate specified in the (seconds) field</td></tr><tr><td class="align_left">b</td><td class="align_center">It breaks the monitoring session, putting the system in the “standby” mode</td></tr><tr><td class="align_left">c</td><td class="align_center">It identifies which LCSS, SS, or RI is connected to the system, and gets an instantaneous device readouts</td></tr><tr><td class="align_left">i</td><td class="align_center">It shows complete information about <i>SentinAir</i> status</td></tr><tr><td class="align_left">q</td><td class="align_center">It quits the command line interface</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Journal of Sensors

tab2

Table 2

Table 2: Design and Development of a Flexible, Plug-and-Play, Cost-Effective Tool for on-Field Evaluation of Gas Sensors 