Table of Contents Author Guidelines Submit a Manuscript
Journal of Spectroscopy
Volume 2015 (2015), Article ID 826759, 12 pages
http://dx.doi.org/10.1155/2015/826759
Research Article

Corrosion Performance of AISI-309 Exposed to Molten Salts V2O5-Na2SO4 at 700°C Applying EIS and Electrochemical Techniques

Facultad de Ciencias Químicas e Ingeniería, Centro de Investigación en Ingeniería y Ciencias Aplicadas, UAEM, Avenida Universidad 1001, Colonia Chamilpa, 62209 Cuernavaca, MOR, Mexico

Received 11 February 2015; Revised 16 March 2015; Accepted 17 March 2015

Academic Editor: Djordje Mandrino

Copyright © 2015 E. F. Diaz et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Birks, G. H. Meier, and F. S. Pettit, Introduction to the High-Temperature Oxidation of Metals, Cambridge University Press, Cambridge, UK, 2nd edition, 2006.
  2. R. A. Rapp, J. H. Devan, D. L. Douglass, P. C. Nordine, F. S. Pettit, and D. P. Whittle, “High temperature corrosion in energy systems,” Materials Science and Engineering, vol. 50, no. 1, pp. 1–17, 1981. View at Publisher · View at Google Scholar · View at Scopus
  3. C. X. Wu, A. Nishikata, and T. Tsuru, “AC Impedance and electrochemical techniques for evaluating hot corrosion resistance,” in High Temperature Corrosion of Advanced Materials and Protective Coatings, pp. 221–225, Elsevier Science Publishers, 1992. View at Google Scholar
  4. E. Otero, A. Pardo, F. J. Pérez, J. F. Álvarez, and M. V. Utrilla, “A high temperature corrosion kinetic study of HK-40 superalloy surface treated, in contact with eutectic mixture 82%K2S2O7-18%V2O5,” Corrosion Science, vol. 39, no. 1, pp. 133–145, 1997. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Schütze, “Corrosion resistance at elevated temperatures in highly aggressive environments,” Corrosion, vol. 63, no. 1, pp. 4–18, 2007. View at Publisher · View at Google Scholar
  6. C. Cuevas-Arteaga, J. Uruchurtu-Chavarín, J. Porcayo-Calderon, G. Izquierdo-Montalvo, and J. Gonzalez, “Study of molten salt corrosion of HK-40 m alloy applying linear polarization resistance and conventional weight loss techniques,” Corrosion Science, vol. 46, no. 11, pp. 2663–2679, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. J. G. Gonzalez-Rodriguez, S. Haro, A. Martinez-Villafañe, V. M. Salinas-Bravo, and J. Porcayo-Calderón, “Corrosion performance of heat resistant alloys in Na2SO4–V2O5 molten salts,” Materials Science and Engineering A, vol. 435-436, pp. 258–265, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. B. P. Mohanty and D. A. Shores, “Role of chlorides in hot corrosion of a cast Fe–Cr–Ni alloy. Part I: experimental studies,” Corrosion Science, vol. 46, no. 12, pp. 2893–2907, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Singh, J. Swaminathan, S. Paswan, V. Rajinikanth, and I. Chattoraj, “Investigations on high temperature corrosion of wire enameling oven,” Engineering Failure Analysis, vol. 18, no. 5, pp. 1375–1387, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Gao, F. H. Stott, J. L. Dawson, and D. M. Farrell, “Electrochemical monitoring of high-temperature molten-salt corrosion,” Oxidation of Metals, vol. 33, no. 1-2, pp. 79–94, 1990. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Tzvetkoff and J. Kolchakov, “Mechanism of growth, composition and structure of oxide films formed on ferrous alloys in molten salt electrolytes—a review,” Materials Chemistry and Physics, vol. 87, no. 1, pp. 201–211, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. J. A. Ellor, “Uniform,” in Corrosion Test and Standard Manual Application and Interpretation, ASTM Manual Series, ASTM, Philadelphia, Pa, USA, 1995. View at Google Scholar
  13. U. K. Chatterjee, S. K. Bose, and S. K. Roy, Electrochemical Techniques for Corrosion Engineering, edited by R. Baboian, NACE Publication, Houston, Tex, USA, 1986.
  14. C. Cuevas-Arteaga, “Corrosion study of HK-40m alloy exposed to molten sulfate/vanadate mixtures using the electrochemical noise technique,” Corrosion Science, vol. 50, no. 3, pp. 650–663, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. C. C. Arteaga, “Corrosion evaluation of AISI-309 exposed to 50 mol% Na2SO4-50 mol% V2O5 at high temperature applying electrochemical techniques and the weight loss method,” International Journal of Electrochemical Science, vol. 7, no. 12, pp. 12283–12300, 2012. View at Google Scholar · View at Scopus
  16. C. Cuevas-Arteaga, V. Escalada, and M. A. Trujillo, “Molten salt corrosion evaluation of alloy T22 applying electrochemical techniques and the conventional weight loss method,” ECS Transactions, vol. 36, no. 1, pp. 65–82, 2011. View at Google Scholar
  17. G. W. Cunningham and A. D. S. Brasunas, “The effects of contamination by vanadium and sodium compounds on the air-corrosion of stainless steel,” Corrosion Journal, vol. 12, no. 8, pp. 389t–405t, 1956. View at Google Scholar
  18. H. Lewis, “Corrosion by vanadium-pentoxide sodium-sulphate mixtures in laboratory tests: correlation with corrosion by oil-ash in field tests,” British Petroleum Equipment News, vol. 7, no. 4-5, pp. 17–23, 1957. View at Google Scholar
  19. L. B. Pfeil, “Corrosion of heat-resisting alloys in the presence of fuel-oil ash,” British Petroleum Equipment News, vol. 7, no. 4-5, pp. 54–69, 1957. View at Google Scholar
  20. ASTM Standard, “G59-97: standard test method for conducting potentiodynamic polarization resistance measurements,” in Annual Book of ASTM Standards, vol. 3, ASTM International, 2014. View at Google Scholar
  21. W. Gao and Z. Li, Developments in High-Temperature Corrosion and Protection of Materials, Woodhead Publishing Limited, Cambridge, UK, 1st edition, 2008.
  22. W. Skinner, “Influence of experimental inaccuracies on corrosion rates and Tafel slopes determined from electrochemical measurements in different overpotential ranges,” British Corrosion Journal, vol. 22, no. 3, pp. 172–175, 1987. View at Publisher · View at Google Scholar · View at Scopus
  23. E. Poorqasemi, O. Abootalebi, M. Peikari, and F. Haqdar, “Investigating accuracy of the Tafel extrapolation method in HCl solutions,” Corrosion Science, vol. 51, no. 5, pp. 1043–1054, 2009. View at Google Scholar · View at Scopus
  24. M. A. Amin, K. F. Khaled, and S. A. Fadl-Allah, “Testing validity of the Tafel extrapolation method for monitoring corrosion of cold rolled steel in HCl solutions—experimental and theoretical studies,” Corrosion Science, vol. 52, no. 1, pp. 140–151, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. V. Feliu, J. A. González, and S. Feliu, “Corrosion estimates from the transient response to a potential step,” Corrosion Science, vol. 49, no. 8, pp. 3241–3255, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. X. Zhang, W. He, I. Odnevall Wallinder, J. Pan, and C. Leygraf, “Determination of instantaneous corrosion rates and runoff rates of copper from naturally patinated copper during continuous rain events,” Corrosion Science, vol. 44, no. 9, pp. 2131–2151, 2002. View at Publisher · View at Google Scholar · View at Scopus
  27. I. D. Raistrick, D. R. Franceschetti, and J. R. Macdonald, “Chapter 2. Theory,” in Impedance Spectroscopy: Theory, Experiment, and Applications, E. Barsoukov and J. R. Macdonald, Eds., John Wiley & Sons, Hoboken, NJ, USA, 2nd edition, 2005. View at Google Scholar
  28. J. L. Trinstancho-Reyes, M. Sanchez-Carrillo, R. Sandoval-Jabalera et al., “Electrochemical impedance spectroscopy investigation of alloy inconel 718 in molten salts at high temperature,” International Journal of Electrochemical Science, vol. 6, no. 2, pp. 419–431, 2011. View at Google Scholar · View at Scopus
  29. Y. J. Tan, S. Bailey, and B. Kinsella, “An investigation of the formation and destruction of corrosion inhibitor films using electrochemical impedance spectroscopy (EIS),” Corrosion Science, vol. 38, no. 9, pp. 1545–1561, 1996. View at Publisher · View at Google Scholar · View at Scopus
  30. C. Cuevas-Arteaga, J. Uruchurtu-Chavarín, J. González, G. Izquierdo-Montalvo, J. Porcayo-Calderón, and U. Cano-Castillo, “Corrosion evaluation of Alloy 800 in sulfate/vanadate molten salts,” Corrosion, vol. 60, no. 6, pp. 548–560, 2004. View at Publisher · View at Google Scholar · View at Scopus
  31. C. S. Ni, L. Y. Lu, C. L. Zeng, and Y. Niu, “Electrochemical impedance studies of the initial-stage corrosion of 310S stainless steel beneath thin film of molten (0.62Li,0.38K)2CO3 at 650°C,” Corrosion Science, vol. 53, no. 3, pp. 1018–1024, 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. C. L. Zeng, W. Wang, and W. T. Wu, “Electrochemical impedance models for molten salt corrosion,” Corrosion Science, vol. 43, no. 4, pp. 787–801, 2001. View at Publisher · View at Google Scholar · View at Scopus
  33. E. Barsoukov and J. R. Macdonald, Impedance Spectroscopy Theory, Experiment, and Applications, Wiley-Interscience, 2nd edition, 2005.
  34. Q.-A. Huang, R. Hui, B. Wang, and J. Zhang, “A review of AC impedance modeling and validation in SOFC diagnosis,” Electrochimica Acta, vol. 52, no. 28, pp. 8144–8164, 2007. View at Publisher · View at Google Scholar · View at Scopus
  35. D. M. Farrell, W. M. Cox, J. L. Dawson, and P. D. Bottomley, “Electrochemical interfaces in high temperature sulphidation and oxidation reaction,” in Proceedings of the UK CORROSION/NACE, 1989.
  36. J. Pan, C. Leygraf, R. F. A. Jargelius-Pettersson, and J. Lindén, “Characterization of high-temperature oxide films on stainless steels by electrochemical-impedance spectroscopy,” Oxidation of Metals, vol. 50, no. 5-6, pp. 431–455, 1998. View at Publisher · View at Google Scholar · View at Scopus
  37. J. E. G. González and J. C. Mirza-Rosca, “Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applications,” Journal of Electroanalytical Chemistry, vol. 471, no. 2, pp. 109–115, 1999. View at Publisher · View at Google Scholar · View at Scopus
  38. E. Barsoukov and J. Ross Macdonald, Impedance Spectroscopy Theory, Experiment, and Applications, Wiley Interscience, 2nd edition, 2005.
  39. Y. M. Wu and R. A. Rapp, “Electrochemical impedance studies of hot corrosion of preoxidized Ni by a thin-fused Na2SO4 film,” Journal of the Electrochemical Society, vol. 138, no. 9, pp. 2683–2690, 1991. View at Publisher · View at Google Scholar · View at Scopus
  40. N. A. Al-Mobarak, A. A. Al-Swayih, and F. A. Al-Rashoud, “Corrosion behavior of Ti-6Al-7Nb alloy in biological solution for dentistry applications,” International Journal of Electrochemical Science, vol. 6, no. 6, pp. 2031–2042, 2011. View at Google Scholar · View at Scopus
  41. C. H. Hsu and F. Mansfeld, “Concernng the conversion of the constant phase element parameter Y0 into a capacitance,” Corrosion, vol. 57, no. 9, pp. 747–748, 2001. View at Publisher · View at Google Scholar · View at Scopus
  42. D. A. López, S. N. Simison, and S. R. de Sánchez, “The influence of steel microstructure on CO2 corrosion. EIS studies on the inhibition efficiency of benzimidazole,” Electrochimica Acta, vol. 48, no. 7, pp. 845–854, 2003. View at Publisher · View at Google Scholar · View at Scopus
  43. C. L. Zeng and J. Li, “Electrochemical impedance studies of molten (0.9Na,0.1K)2SO4-induced hot corrosion of the Ni-based superalloy M38G at 900 °C in air,” Electrochimica Acta, vol. 50, no. 28, pp. 5533–5538, 2005. View at Publisher · View at Google Scholar · View at Scopus