Table of Contents Author Guidelines Submit a Manuscript
Journal of Spectroscopy
Volume 2017, Article ID 7920652, 7 pages
https://doi.org/10.1155/2017/7920652
Research Article

Electronic Controlling on Nanotribological Properties of a Textured Surface by Laser Processing

1College of Mechanical & Electrical Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China
2Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou 221116, China
3School of Materials Science and Engineering, China University of Mining and Technology, Xuzhou 221116, China

Correspondence should be addressed to Kun Liu; moc.361@5991kuil

Received 11 July 2017; Accepted 14 August 2017; Published 6 September 2017

Academic Editor: Xun Hu

Copyright © 2017 Haifeng Yang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. A. G. Bruzzone, H. L. Costa, P. M. Lonardo, and D. A. Lucca, “Advances in engineered surfaces for functional performance,” Cirp Annals-Manufacturing Technology, vol. 57, no. 2, pp. 750–769, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. X. Fan, M. W. Little, and K. K. Murray, “Infrared laser wavelength dependence of particles ablated from glycerol,” Applied Surface Science, vol. 255, no. 5, pp. 1699–1704, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. J. X. Man, H. F. Yang, Y. Q. Wang, C. Yan, and S. Zhang, “Nanotribological properties of nanotextured Ni-Co coating surface measured with AFM colloidal probe technique,” Journal of Laser Micro/Nanoengineering, vol. 12, no. 1, pp. 16–21, 2017. View at Google Scholar
  4. X. Fan, S. Z. Wang, A. L. Zheng et al., “Investigation on infrared laser desorption of solid matrix using scanning electron microscope and fast photography,” Microscopy Research and Technique, vol. 76, no. 7, pp. 744–750, 2013. View at Publisher · View at Google Scholar
  5. I. Etsion, O. Levinson, and G. Halperin, “Experimental investigation of the elastic-plastic contact area and static friction of a sphere on flat,” Journal of Tribology, vol. 127, no. 1, pp. 47–50, 2005. View at Google Scholar
  6. K. D. Zhang, J. X. Deng, R. Meng, P. Gao, and H. Yue, “Effect of nano-scale textures on cutting performance of WC/Co-based Ti55Al45N coated tools in dry cutting,” International Journal of Refractory Metals and Hard Materials, vol. 51, pp. 35–49, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. H. S. Amoli, H. Amani, and M. Mozaffari, “Deposition of ITO nanopowder layers on flexible substrate by spin coating using pulsed Nd-YAG laser for crystallization and bonding,” Journal of Russian Laser Research, vol. 34, no. 6, pp. 581–585, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Ghasemi, R. Shoja-Razavi, R. Mozafarinia, and H. Jamali, “The influence of laser treatment on thermal shock resistance of plasma-sprayed nanostructured yttria stabilized zirconia thermal barrier coatings,” Ceramics International, vol. 40, no. 1, pp. 347–355, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. H. F. Yang, H. D. He, E. L. Zhao et al., “Electronic-controlling nanotribological behavior of textured silicon surfaces fabricated by laser interference lithography,” Laser Physics Letters, vol. 11, no. 10, article 105901, 2014. View at Google Scholar
  10. H. F. Yang, H. D. He, E. L. Zhao et al., “Simulation and fabrication of nanostructures with laser interference lithography,” Laser Physics, vol. 24, no. 6, pp. 225–292, 2014. View at Google Scholar
  11. H. F. Yang, T. C. Chen, J. G. Qian et al., “Friction-reducing micro/nanoprotrusions on electrodeposited Ni–Co alloy coating surface fabricated by laser direct writing,” Bulletin of Materials Science, vol. 38, no. 1, pp. 173–181, 2015. View at Publisher · View at Google Scholar
  12. J. Bico, C. Marzolin, and D. Quéré, “Pearl drops,” Europhysics Letters, vol. 47, no. 2, pp. 220–226, 1999. View at Google Scholar
  13. X. Zhang, F. Shi, X. Yu et al., “Polyelectrolyte multilayer as matrix for electrochemical deposition of gold clusters: toward super-hydrophobic surface,” Journal of the American Chemical Society, vol. 126, no. 10, pp. 3064-3065, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. N. J. Shirtcliffe, G. McHale, M. I. Newton, G. Chabrol, and C. C. Perry, “Dual-scale roughness produces unusually water-repellent surfaces,” Advanced Materials, vol. 16, no. 21, pp. 1929–1932, 2004. View at Google Scholar
  15. Y. Y. Wu, H. Sugimura, Y. Inoue, and O. Takai, “Thin films with nanotextures for transparent and ultra water-repellent coatings produced from trimethylmethoxysilane by microwave plasma CVD,” Chemical Vapor Deposition, vol. 8, no. 2, pp. 47–50, 2002. View at Google Scholar
  16. Y. F. Mo, W. J. Zhao, D. M. Huang, F. Zhao, and M. Bai, “Nanotribological properties of precision-controlled regular nanotexture on H-passivated Si surface by current-induced local anodic oxidation,” Ultramicroscopy, vol. 109, no. 3, pp. 247–252, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. F. Mo, Y. Wing, J. B. Pu, and M. Bai, “Precise positioning of lubricant on a surface using the local anodic oxide method,” Langmuir, vol. 25, no. 1, pp. 40–42, 2009. View at Google Scholar
  18. J. Y. Park, Y. Qi, D. Ogletree, P. A. Thiel, and M. Salmeron, “Influence of carrier density on the friction properties of silicon pn junctions,” Physical Review B, vol. 76, no. 6, article 064108, 2007. View at Google Scholar
  19. Y. Qi, J. Park, B. Hendriksen, D. F. Ogletree, and M. Salmeron, “Electronic contribution to friction on GaAs: an atomic force microscope study,” Physical Review B, vol. 77, no. 18, article 184105, 2008. View at Google Scholar
  20. H. Liu, S. Fujisawa, A. Tanaka, and Y. Enomoto, “Controlling and improving the microtribological properties of Langmuir–Blodgett monolayer films using an external electric field,” Thin Solid Films, vol. 368, no. 1, pp. 152–156, 2000. View at Publisher · View at Google Scholar
  21. J. Koch, F. Korte, T. Bauer, C. Fallnich, A. Ostendorf, and B. N. Chichkov, “Nanotexturing of gold films by femtosecond laser-induced melt dynamics,” Applied Physics A, vol. 81, no. 2, pp. 325–328, 2005. View at Publisher · View at Google Scholar · View at Scopus
  22. P. T. Mannion, J. Magee, E. Coyne, G. M. O’connor, and T. J. Glynn, “The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air,” Applied Surface Science, vol. 233, no. 1–4, pp. 275–287, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. W. Jia, Z. N. Peng, Z. J. Wang, X. Ni, and C. Y. Wang, “The effect of femtosecond laser micromachining on the surface characteristics and subsurface microstructure of amorphous FeCuNbSiB alloy,” Applied Surface Science, vol. 253, no. 3, pp. 1299–1303, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Chen, W. Zhai, and Y. Qi, “The mechanism and technology of friction control by applying electric voltage II. The effects of applied voltage on friction,” TRIBOLOGY-BEIJING, vol. 16, no. 3, pp. 235–238, 1996. View at Google Scholar
  25. W. Zhai, R. Chen, and Y. Qi, “The mechanism and technique of friction control by applied voltage I. The correlation of self-generated voltage to friction force,” TRIBOLOGY-BEIJING, vol. 16, no. 1, pp. 1–5, 1996. View at Google Scholar
  26. H. R. Ao, Y. F. Gao, W. J. Zhai, and Y. L. Qi, “An experimental research on self-generated potential of ball-disc friction pair under normal pressure and low and middle vacuum,” TRIBOLOGY-BEIJING, vol. 19, no. 250, pp. 250–254, 1999. View at Google Scholar