`Mathematical Problems in EngineeringVolume 2006, Article ID 20598, 8 pageshttp://dx.doi.org/10.1155/MPE/2006/20598`

## Analysis of natural in-plane vibration of rectangular plates using homotopy perturbation approach

1Department of General Mechanics, Rheinisch-Westfälische Technische Hochschule (RWTH) Aachen University, Templergraben 64, Aachen 52056, Germany
2Department of Automatics and Biomechanics, Technical University of Łódź, 1/15 Stefanowski Street, Łódź 90-924, Poland
3Department of Civil Engineering, Pridneprovyhe State Academy of Civil Engineering and Architecture, 24a Chernyschevskogo Street, Dnepropetrovsk 49005, Ukraine

Received 1 June 2006; Accepted 16 July 2006

Copyright © 2006 Igor V. Andrianov et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1. I. V. Andrianov and J. Awrejcewicz, “New trends in asymptotic approaches: summation and interpolation methods,” Applied Mechanics Reviews, vol. 54, no. 1, pp. 69–92, 2001.
2. I. V. Andrianov, V. Z. Gristchak, and A. O. Ivankov, “New asymptotic method for the natural, free and forced oscillations of rectangular plates with mixed boundary conditions,” Technische Mechanik, vol. 14, no. 3-4, pp. 185–193, 1994.
3. I. V. Andrianov and A. O. Ivankov, “Application of Padé approximants in the method of introducing a parameter in the investigation of biharmonic equations with complex boundary conditions,” USSR Computational Mathematics and Mathematical Physics, vol. 27, no. 1, pp. 193–196, 1987.
4. I. V. Andrianov and A. O. Ivankov, “New asymptotic method for solving of mixed boundary value problem,” in Free Boundary Problems in Continuum Mechanics (Novosibirsk, 1991), vol. 106 of Internat. Ser. Numer. Math., pp. 39–45, Birkhäuser, Basel, 1992.
5. I. V. Andrianov and A. O. Ivankov, “On the solution of the plate bending mixed problems using modified technique of boundary conditions perturbation,” Zeitschrift für Angewandte Mathematik und Mechanik, vol. 73, no. 2, pp. 120–122, 1993.
6. J. Awrejcewicz, I. V. Andrianov, and L. I. Manevitch, Asymptotic Approaches in Nonlinear Dynamics. New Trends and Applications, Springer Series in Synergetics, Springer, Berlin, 1998.
7. G. A. Baker and P. Graves-Morris, Padé Approximants, Encyclopedia of Mathematics and Its Applications, Cambridge University Press, Cambridge, 2nd edition, 1996.
8. N. S. Bardell, R. S. Langley, and J. M. Dunsdon, “On the free in-plane vibration of isotropic rectangular plates,” Journal of Sound and Vibration, vol. 191, no. 3, pp. 459–467, 1996.
9. A. N. Bercin and R. S. Langley, “Application of the dynamical stiffness technique to the in-plane vibration of plate structures,” Computers & Structures, vol. 59, no. 5, pp. 869–875, 1996.
10. A. A. Dorodnitzyn, “Using of small parameter method for numerical solution of mathematical physics equations,” Numerical Methods for Solving of Continuum Mechanics Problems (Collection of Works), VZ AN SSSR, Moscow, pp. 85–101, 1969 (Russian).
11. R. El Mokhtari, J.-M. Cadou, and M. Potier-Ferry, “A two grid algorithm based on perturbation and homotopy method,” Comptes Rendus Mecanique, vol. 330, no. 12, pp. 825–830, 2002.
12. A. Elhage-Hussein, M. Potier-Ferry, and N. Damil, “A numerical continuation method based on Padé approximants,” International Journal of Solids and Structures, vol. 37, no. 46-47, pp. 6981–7001, 2000.
13. N. H. Farag and J. Pan, “Free and forced in-plane vibration of rectangular plates,” Journal of the Acoustical Society of America, vol. 103, no. 1, pp. 408–413, 1998.
14. N. H. Farag and J. Pan, “Modal characteristics of in-plane vibration of rectangular plates,” Journal of the Acoustical Society of America, vol. 105, no. 6, pp. 3295–3310, 1999.
15. D. J. Gorman, “Accurate analytical type solution for the free in-plane vibration of clamped and simply supported rectangular plates,” Journal of Sound and Vibration, vol. 276, no. 1-2, pp. 311–333, 2004.
16. D. J. Gorman, “Free in-plane vibration analysis of rectangular plates by the method of superposition,” Journal of Sound and Vibration, vol. 272, no. 3–5, pp. 831–851, 2004.
17. D. J. Gorman, “Free in-plane vibration analysis of rectangular plates with elastic support normal to the boundaries,” Journal of Sound and Vibration, vol. 285, no. 4-5, pp. 941–966, 2005.
18. D. J. Gorman, “Exact solutions for the free in-plane vibration of rectangular plates with two opposite edges simply supported,” Journal of Sound and Vibration, vol. 294, no. 1-2, pp. 131–161, 2006.
19. K. F. Graff, Wave Motion in Elastic Solids, Dover, New York, 1991.
20. R. H. Gutierezz and P. A. A. Laura, “In-plane vibrations of thin, elastic, rectangular plates elastically restrained against translation along the edges,” Journal of Sound and Vibration, vol. 132, no. 3, pp. 512–515, 1989.
21. J. L. Guyander, C. Boisson, and C. Lesueur, “Energy transmission in finite coupled plates, part1: theory,” Journal of Sound and Vibration, vol. 81, no. 1, pp. 81–92, 1982.
22. K. Hyde, J. Y. Chang, C. Bacca, and J. A. Wickert, “Parameter studies for plane stresses in-plane vibration of rectangular plates,” Journal of Sound and Vibration, vol. 247, no. 3, pp. 471–487, 2001.
23. R. S. Langley and A. N. Bercin, “Wave intensity analysis of high frequency vibrations,” Philosophical Transactions: Physical Sciences and Engineering, vol. 346, no. 1681, pp. 489–499, 1994.
24. S. Liao, Beyond perturbation. Introduction to the Homotopy Analysis Method, vol. 2 of CRC Series: Modern Mechanics and Mathematics, Chapman & Hall/CRC, Florida, 2004.
25. R. H. Lyon, “In-plane contribution to structural noise transmission,” Noise Control Engineering Journal, vol. 26, pp. 22–27, 1985.
26. S. G. Mihlin, Variational Methods in Mathematical Physics, Pergamon Press, Oxford, New York, 1964.
27. F. Molenkamp, J. B. Sellmeijer, C. B. Sharma, and E. B. Lewis, “Explanation of locking of four-node plane element by considering it as elastic Dirichlet-type boundary value problem,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 24, no. 13, pp. 1013–1048, 2000.
28. B. Ovunc, “In-plane vibration of plates by continuous mass matrix method,” Computers & Structures, vol. 8, no. 6, pp. 723–731, 1978.
29. J. Seok and H. F. Tiersten, “Free vibration of annular sector cantilever plates. Part 2: in-plane motion,” Journal of Sound and Vibration, vol. 271, no. 3–5, pp. 773–787, 2004.
30. J. Seok, H. F. Tiersten, and H. A. Scarton, “Free vibration of rectangular cantilever plates. Part 2: in-plane motion,” Journal of Sound and Vibration, vol. 271, no. 1-2, pp. 147–158, 2004.
31. A. V. Singh and T. Muhammad, “Free in-plane vibration of isotropic non-rectangular plates,” Journal of Sound and Vibration, vol. 273, no. 1-2, pp. 219–231, 2004.
32. G. Wang, S. Veeramani, and N. M. Wereley, “Analysis of sandwich plates with isotropic face plates and a viscoelastic core,” Journal of Vibration and Acoustics, vol. 122, no. 3, pp. 305–312, 2000.
33. G. Wang and N. M. Wereley, “Free in-plane vibration of rectangular plates,” AIAA Journal, vol. 40, no. 5, pp. 953–959, 2002.