Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2008, Article ID 730358, 9 pages
http://dx.doi.org/10.1155/2008/730358
Research Article

An Inverse Quadratic Eigenvalue Problem for Damped Structural Systems

Department of Mathematics, Jiangsu University of Science and Technology, Zhenjiang 212003, China

Received 23 October 2007; Accepted 14 February 2008

Academic Editor: Angelo Luongo

Copyright © 2008 Yongxin Yuan. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. H. F. Chu, Modal Testing and Modal Refinement, American Society of Mechanical Engineers, New York, NY, USA, 1983. View at Zentralblatt MATH · View at MathSciNet
  2. M. Baruch, “Optimization procedure to correct stiffness and flexibility matrices using vibration tests,” AIAA Journal, vol. 16, no. 11, pp. 1208–1210, 1978. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  3. M. Baruch and I. Y. Bar-Itzhack, “Optimal weighted orthogonalization of measured modes,” AIAA Journal, vol. 16, no. 4, pp. 346–351, 1978. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  4. A. Berman, “Mass matrix correction using an incomplete set of measured modes,” AIAA Journal, vol. 17, no. 10, pp. 1147–1148, 1979. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  5. A. Berman and E. J. Nagy, “Improvement of a large analytical model using test data,” AIAA Journal, vol. 21, no. 8, pp. 1168–1173, 1983. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  6. F.-S. Wei, “Stiffness matrix correction from incomplete test data,” AIAA Journal, vol. 18, no. 10, pp. 1274–1275, 1980. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  7. F.-S. Wei, “Mass and stiffness interaction effects in analytical model modification,” AIAA Journal, vol. 28, no. 9, pp. 1686–1688, 1990. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  8. M. I. Friswell, D. J. Inman, and D. F. Pilkey, “The direct updating of damping and stiffness matrices,” AIAA Journal, vol. 36, no. 3, pp. 491–493, 1998. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  9. D. F. Pilkey, Computation of a damping matrix for finite element model updating, Ph.D. thesis, Department of Engineering Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, Va, USA, 1998. View at Zentralblatt MATH · View at MathSciNet
  10. Y.-C. Kuo, W.-W. Lin, and S.-F. Xu, “New methods for finite element model updating problems,” AIAA Journal, vol. 44, no. 6, pp. 1310–1316, 2006. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  11. A. Ben-Israel and T. N. E. Greville, Generalized Inverses: Theory and Applications, Pure and Applied Mathematic, John Wiley & Sons, New York, NY, USA, 1974. View at Zentralblatt MATH · View at MathSciNet
  12. J.-P. Aubin, Applied Functional Analysis, John Wiley & Sons, New York, NY, USA, 1979. View at Zentralblatt MATH · View at MathSciNet