Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2010, Article ID 627836, 21 pages
http://dx.doi.org/10.1155/2010/627836
Research Article

Design for Motor Controller in Hybrid Electric Vehicle Based on Vector Frequency Conversion Technology

School of Automotive Engineering, Faculty of Vehicle Engineering and Mechanics, State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China

Received 26 July 2009; Accepted 30 September 2009

Academic Editor: José Balthazar

Copyright © 2010 Jing Lian et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Q. Q. Chen, F. C. Sun, and J. G. Zhu, Modern EV Technology, Beijing Institute of Technology Press, Beijing, China, 2002. View at Zentralblatt MATH
  2. H. Hu and H. Song, Electric Vehicle, China Communications Press, Beijing, China, 2003. View at Zentralblatt MATH
  3. R. Saeks, C. J. Cox, J. Neidhoefer, P. R. Mays, and J. J. Murray, “Adaptive control of a hybrid electric vehicle,” IEEE Transactions on Intelligent Transportation Systems, vol. 3, no. 4, pp. 213–233, 2002. View at Publisher · View at Google Scholar
  4. W. Liu, G. W. Cheng, and C. N. Deng, “Analysis of electric vehicle's driving motor,” Motor Technology, pp. 26–28, 2006. View at Google Scholar
  5. H. D. Li, The Control System of AC Speed-Governing, Publishing House of Electronics Industry, 2003.
  6. K. Zhou and D. Wang, “Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis,” IEEE Transactions on Industrial Electronics, vol. 49, no. 1, pp. 186–196, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Shinnaka, S. Takeuchi, A. Kitajima, F. Eguchi, and H. Haruki, “Frequency-hybrid vector control for sensorless induction motor and its application to electric vehicle drive,” in Proceedings of the IEEE Applied Power Electronics Conference and Exposition (APEC '01), vol. 1, pp. 32–39, 2001. View at Scopus
  8. Z. X. Fu, J. Xiang, W. C. Reynolds, and B. Nefcy, “Vector control of an IPM synchronous machine capable of full range operations for hybrid electric vehicle application,” in Proceedings of the IEEE Industry Applications Society Conference (IAS '03), vol. 3, pp. 1443–1450, 2003. View at Scopus
  9. D. A. Rendusara and P. N. Enjeti, “An improved inverter output filter configuration reduces common and differential modes dv/dt at the motor terminals in PWM drive systems,” IEEE Transactions on Power Electronics, vol. 13, no. 6, pp. 1135–1143, 1998. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Mutoh, J. Nakashima, and M. Kanesaki, “Multilayer power printed structures suitable for controlling EMI noises generated in power converters,” IEEE Transactions on Industrial Electronics, vol. 50, no. 6, pp. 1085–1094, 2003. View at Publisher · View at Google Scholar
  11. Y. Onozawa, M. Otsuki, and Y. Seki, “Investigation of carrier streaming effect for the low spike fast IGBT turn-off,” in Proceedings of the 18th International Symposium on Power Semiconductor Devices & IC's, pp. 173–176, University of Naples, Naples, Italy, 2006. View at Publisher · View at Google Scholar
  12. C. C. Chen and X. Y. Xu, “Modeling the conducted EMI emission of an electric vehicle (EV) traction drive,” in Proceedings of IEEE International Symposium on Electromagnetic Compatibility, vol. 2, pp. 796–801, Denver, Colo, USA, 1998. View at Publisher · View at Google Scholar
  13. N. Mutoh, M. Nakanishi, M. Kanesaki, and J. Nakashima, “Control methods for EMI noises appearing in electric vehicle drive systems,” in Proceedings of the IEEE Applied Power Electronics Conference and Exposition (APEC '05), vol. 2, pp. 1022–1028, Austin, Tex, USA, 2005. View at Publisher · View at Google Scholar