Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2010, Article ID 865191, 13 pages
Research Article

Projecting Perspectives

1School of Architecture and Planning, Crough Center for Architectural Studies, The Catholic University of America, 620 Michigan Avenue N.E., Washington, DC 20064, USA
2971 Tilton Road, Valley Cottage, NY 10989, USA

Received 4 July 2010; Accepted 22 November 2010

Academic Editor: Sergio Preidikman

Copyright © 2010 Michael Sciarrillo and Scott Aker. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. D. Baxter and M. Mehlich, “Reverse engineering is reverse forward engineering,” in Proceedings of IEEE Working Conference on Reverse Engineering, 1997.
  2. H. L. Agrim and C. Rainero, “Aplicación de un Metodo de Restitucion. Obtencion de Informacion Metrica Base,” in Proceedings of the 2nd Seminario Iberoamericano de Grafico Digital, pp. 432–437, Mar del Plata, Argentina, September 1998,
  3. F. D. K. Ching, Design Drawing, John Wiley & Sons, New York, NY, USA, 1998.
  4. M. E. Helms, Perspective Drawing: Step-By-Step Handbook, Prentice Hall, Englewood Cliffs, NJ, USA, 1990.
  5. M. Sciarrillo and S. Aker, “Drawing as insight into wholeness,” Journal for Geometry and Graphics, vol. 12, no. 1, pp. 87–98, 2008. View at Google Scholar