Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2010 (2010), Article ID 947818, 22 pages
http://dx.doi.org/10.1155/2010/947818
Research Article

Analysis of Crack Propagation Path on the Anisotropic Bi-Material Rock

Department of Resources Engineering, National Cheng Kung University, Tainan, Taiwan

Received 29 July 2010; Accepted 5 September 2010

Academic Editor: Oleg V. Gendelman

Copyright © 2010 Chao-Shi Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. L. Williams, “The stresses around a faule or crack in dissimilar media,” Bulletin of Seismological Society of America, vol. 49, no. 2, pp. 199–204, 1959. View at Google Scholar
  2. A. H. England, “A crack between dissimilar media,” Journal of Applied Mechanics, vol. 32, pp. 400–402, 1965. View at Google Scholar
  3. J. R. Rice and G. Sih, “Plane problems of cracks in dissimilar media,” Journal of Applied Mechanics, Transactions ASME, vol. 32, pp. 418–423, 1965. View at Google Scholar
  4. J. R. Rice, “Elastic fracture mechanics concepts for interfacial crack,” Journal of Applied Mechanics, Transactions ASME, vol. 55, no. 1, pp. 98–103, 1988. View at Google Scholar
  5. D. L. Clements, “A crack between dissimilar anisotropic media,” International Journal of Engineering Science, vol. 9, no. 2, pp. 257–265, 1971. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  6. J. R. Willis, “Fracture mechanics of interfacial cracks,” Journal of the Mechanics and Physics of Solids, vol. 19, no. 6, pp. 353–368, 1971. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  7. T. C. T. Ting, “Explicit solution and invariance of the singularities at an interface crack in anisotropic composites,” International Journal of Solids and Structures, vol. 22, no. 9, pp. 965–983, 1986. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  8. T. C. T. Ting, “Interface cracks in anisotropic bimaterials,” Journal of the Mechanics and Physics of Solids, vol. 38, no. 4, pp. 505–513, 1990. View at Publisher · View at Google Scholar
  9. J. L. Bassani and J. Qu, “Finite crack on bimaterial and bicrystal interfaces,” Journal of the Mechanics and Physics of Solids, vol. 37, no. 4, pp. 435–453, 1989. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  10. V. K. Tewary, R. H. Wagoner, and J. P. Hirth, “Elastic Green's function for a composite solid with a planar interface,” Journal of Materials Research, vol. 4, no. 1, pp. 113–123, 1989. View at Publisher · View at Google Scholar
  11. Z. Suo, “Singularities, interfaces and cracks in dissimilar anisotropic media,” Proceedings of the Royal Society of London. Series A, vol. 427, no. 1873, pp. 331–358, 1990. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  12. K. C. Wu, “Stress intensity factor and energy release rate for interfacial cracks between dissimilar anisotropic materials,” Journal of Applied Mechanics, Transactions ASME, vol. 57, pp. 882–886, 1990. View at Publisher · View at Google Scholar
  13. W. Kuang-Chong, “Explicit crack-tip fields of an extending interface crack in an anisotropic bimaterial,” International Journal of Solids and Structures, vol. 27, no. 4, pp. 455–466, 1991. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  14. J. Qu and Q. Li, “Interfacial dislocation and its applications to interface cracks in anisotropic bimaterials,” Journal of Elasticity, vol. 26, no. 2, pp. 169–195, 1991. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  15. H. Gao, M. Abbudi, and D. M. Barnett, “Interfacial crack-tip field in anisotropic elastic solids,” Journal of the Mechanics and Physics of Solids, vol. 40, no. 2, pp. 393–416, 1992. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  16. M. S. Wu and H. Zhou, “Interactions of kinked interfacial cracks,” International Journal of Solids and Structures, vol. 36, no. 2, pp. 241–268, 1999. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  17. E. Pan and B. Amadei, “Boundary element analysis of fracture mechanics in anisotropic bimaterials,” Engineering Analysis with Boundary Elements, vol. 23, no. 8, pp. 683–691, 1999. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  18. S. J. Ping, L. X. Hui, and C. Y. Heng, “A complex variable boundary element method for solving interface crack problems,” International Journal of Fracture, vol. 96, no. 2, pp. 167–178, 1999. View at Publisher · View at Google Scholar
  19. W.-Y. Tian, K.-T. Chau, and Y.-H. Chen, “J-integral analysis of the interaction between an interface crack and parallel subinterface cracks in dissimilar anisotropic materials,” International Journal of Fracture, vol. 111, no. 4, pp. 305–325, 2001. View at Publisher · View at Google Scholar
  20. Z. C. Ou and Y. H. Chen, “Near-tip stress fields and intensity factors for an interface crack in metal/piezoelectric bimaterials,” International Journal of Engineering Science, vol. 42, no. 13-14, pp. 1407–1438, 2004. View at Publisher · View at Google Scholar
  21. M. Wünsche, Ch. Zhang, J. Sladek, V. Sladek, S. Hirose, and M. Kuna, “Transient dynamic analysis of interface cracks in layered anisotropic solids under impact loading,” International Journal of Fracture, vol. 157, no. 1-2, pp. 131–147, 2009. View at Publisher · View at Google Scholar
  22. S. G. Lekhnitskii, Theory of Elasticity of An Anisotropic Elastic Body, Holden-day, San Francisco, Calif, USA, 1963.
  23. T. C. T. Ting, Anisotropic Elasticity:Theory and Application, Oxford University Press, New York, NY, USA, 1996.
  24. E. Pan, “A general boundary element analysis of 2-D linear elastic fracture mechanics,” International Journal of Fracture, vol. 88, no. 1, pp. 41–59, 1997. View at Publisher · View at Google Scholar
  25. P. Sollero and M. H. Aliabadi, “Fracture mechanics analysis of anisotropic plates by the boundary element method,” International Journal of Fracture, vol. 64, no. 4, pp. 269–284, 1993. View at Publisher · View at Google Scholar
  26. C. S. Chen, Characterization of deformability, strength, and fracturing of anisotropic rocks using Brazilian tests, Ph.D. thesis, Department of Civil Engineering, University of Colorado, 1996.
  27. J. T. Chen and H.-K. Hong, “Review of dual boundary element methods with emphasis on hypersingular integrals and divergent series,” Applied Mechanics Reviews, vol. 52, no. 1, pp. 17–32, 1999. View at Publisher · View at Google Scholar
  28. S. L. Crouch and A. M. Starfield, Boundary Element Method in Solid Mechanics, George Allen and Unwin, London, UK, 1983.
  29. T. A. Cruse , Boundary element analysis in computational fracture mechanics, Kluwer Academic, Dordrecht, 1988.
  30. G. C. Sih, P. C. Paris, and G. R. Irwin, “On cracks in rectilinearly anisotropic bodies,” International Journal of Fracture Mechanics, vol. 1, no. 3, pp. 189–203, 1965. View at Publisher · View at Google Scholar
  31. F. Erdogan and G. C. Sih, “On the crack extension in plates under loading and transverse shear,” Journal of Basic Engineering, vol. 58, pp. 519–527, 1963. View at Google Scholar
  32. K. Palaniswamy and W. G. Knauss, “Propagation of a crack under general, in-plane tension,” International Journal of Fracture Mechanics, vol. 8, no. 1, pp. 114–117, 1972. View at Publisher · View at Google Scholar
  33. G. C. Sih, “Strain-energy-density factor applied to mixed mode crack problems,” International Journal of Fracture, vol. 10, no. 3, pp. 305–321, 1974. View at Publisher · View at Google Scholar
  34. C. W. Woo and L. H. Ling, “On angle crack initiation under biaxial loading,” Journal of Strain Analysis for Engineering Design, vol. 19, no. 1, pp. 51–59, 1984. View at Publisher · View at Google Scholar
  35. H. A. Richard, “Examination of brittle fractured criteria for overloapping mode I and mode II loading applied to cracks,” in Application of Fracture Mechanics to Materials and Structures, G. C. Sih et al., Ed., pp. 309–316, Martinus Nijhoff, Leiden, The Netherlands, 1984. View at Google Scholar
  36. L. E. Vallejo, “The brittle and ductile behavior of a material containing a crack under mixed-mode loading,” in Proceedings of the 28th US Symposium on Rock Mechanics (USRMS '87), pp. 383–390, University of Arizona, Tucson, Ariz, USA, 1987.
  37. B. N. Whittaker, R. N. Singh, and G. Sun, Rock Fracture Mechanics: Principles, Design and Applications, Elsevier, New York, NY, USA, 1992.
  38. M. Isida and H. Noguchi, “Plane problems of arbitrarily oriented cracks in bonded dissimilar materials,” Transactions of the Japan Society of Mechanical Engineers, vol. 49, pp. 36–45, 1983. View at Google Scholar
  39. Y. Ryoji and C. Sang-Bong, “Efficient boundary element analysis of stress intensity factors for interface cracks in dissimilar materials,” Engineering Fracture Mechanics, vol. 34, no. 1, pp. 179–188, 1989. View at Publisher · View at Google Scholar
  40. M. Isida and H. Noguchi, “Plane elastostatic problems of bonded dissimilar materials with an interface crack and arbitrarily located cracks,” Transactions of the Japan Society of Mechanical Engineers, vol. 49, pp. 137–146, 1983. View at Google Scholar
  41. T. S. Cook and F. Erdogan, “Stresses in bonded materials with a crack perpendicular to the interface,” International Journal of Engineering Science, vol. 10, no. 8, pp. 677–697, 1972. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  42. J. F. Dwyer and E. Pan, “Edge function analysis of stress intensity factors in cracked anisotropic plates,” International Journal of Fracture, vol. 72, no. 4, pp. 327–342, 1995. View at Publisher · View at Google Scholar
  43. S. B. Cho, K. R. Lee, Y. S. Choy, and R. Yuuki, “Determination of stress intensity factors and boundary element analysis for interface cracks in dissimilar anisotropic materials,” Engineering Fracture Mechanics, vol. 43, no. 4, pp. 603–614, 1992. View at Publisher · View at Google Scholar
  44. N. A. Al-Shayea, “Crack propagation trajectories for rocks under mixed mode I-II fracture,” Engineering Geology, vol. 81, no. 1, pp. 84–97, 2005. View at Publisher · View at Google Scholar