Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2011, Article ID 145638, 30 pages
http://dx.doi.org/10.1155/2011/145638
Research Article

Stability of the Shallow Axisymmetric Parabolic-Conic Bimetallic Shell by Nonlinear Theory

1Faculty of Maritime Studies and Transport, University of Ljubljana, Pot Pomorščakov 4, 6320 Portorož, Slovenia
2Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia

Received 13 July 2010; Revised 16 February 2011; Accepted 30 May 2011

Academic Editor: Mohammad Younis

Copyright © 2011 M. Jakomin and F. Kosel. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. P. Timoshenko and J. M. Gere, Theory of Elastic Stability, McGraw–Hill, New York, NY, USA, 1961.
  2. D. V. C. Panov, “Prikladnaja matematika i mehanika,” Journal of Applied Mathematics and Mechanics, vol. 11, pp. 603–610, 1947 (Russian). View at Google Scholar
  3. W. H. Wittrick, W. H. Wittrick, D. M. Myers, and W. R. Blunden, “Stability of a bimetallic disk,” Quarterly Journal of Mechanics and Applied Mathematics, vol. 6, no. 1, pp. 15–31, 1953. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  4. H. B. Keller and E. L. Reiss, “Spherical cap snapping,” Journal of the Aero/Space Sciences, vol. 26, pp. 643–652, 1959. View at Google Scholar · View at Zentralblatt MATH
  5. M. Vasudevan and W. Johnson, “On multi-metal thermostats,” Applied Scientific Research, Section B, vol. 9, no. 6, pp. 420–430, 1963. View at Publisher · View at Google Scholar · View at Scopus
  6. B. D. Aggarwala and E. Saibel, “Thermal stability of bimetallic shallow spherical shells,” International Journal of Non-Linear Mechanics, vol. 5, no. 1, pp. 49–62, 1970. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Ren-Huai, “Non-linear thermal stability of bimetallic shallow shells of revolution,” International Journal of Non-Linear Mechanics, vol. 18, no. 5, pp. 409–429, 1983. View at Publisher · View at Google Scholar · View at Scopus
  8. G. W. Brodland and H. Cohen, “Deflection and snapping of spherical caps,” International Journal of Solids and Structures, vol. 23, no. 10, pp. 1341–1356, 1987. View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  9. F. Kosel, M. Jakomin, M. Batista, and T. Kosel, “Snap-through of the system of open shallow axi-symmetric bimetallic shell by non-linear theory,” Thin-Walled Structures, vol. 44, no. 2, pp. 170–183, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Kosel and M. Jakomin, “Snap-through of the axi-symmetric bimetallic shell,” in Proceedings of the 3rd International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, September 2007. View at Publisher · View at Google Scholar
  11. M. Batista and F. Kosel, “Thermoelastic stability of bimetallic shallow shells of revolution,” International Journal of Solids and Structures, vol. 44, no. 2, pp. 447–464, 2007. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  12. M. Batista and F. Kosel, “Thermoelastic stability of a double-layered spherical shell,” International Journal of Non-Linear Mechanics, vol. 41, no. 9, pp. 1024–1035, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  13. M. Jakomin, F. Kosel, and T. Kosel, “Thin double curved shallow bimetallic shell of translation in a homogenous temperature field by non-linear theory,” Thin-Walled Structures, vol. 48, no. 3, pp. 243–259, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Jakomin, F. Kosel, and T. Kosel, “Buckling of a shallow rectangular bimetallic shell subjected to outer loads and temperature and supported at four opposite points,” Advances in Mechanical Engineering, vol. 2009, Article ID 767648, 17 pages, 2009. View at Publisher · View at Google Scholar
  15. P. L. Gould, Analysis of Plates and Shells, Prentice Hall, Upper Saddle River, NJ, USA, 1999.
  16. J. N. Reddy, Theory and Analysis of Elastic Plates, Taylor & Francis, London, UK, 1999.
  17. V. Biricikoglu and A. Kalnins, “Large elastic deformations of shells with the inclusion of transverse normal strain,” International Journal of Solids and Structures, vol. 7, no. 5, pp. 431–444, 1971. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  18. E. Carrera, “Historical review of Zig-Zag theories for multilayered plates and shells,” Applied Mechanics Reviews, vol. 56, no. 3, pp. 287–308, 2003. View at Publisher · View at Google Scholar · View at Scopus
  19. U. Icardi and L. Ferrero, “Multilayered shell model with variable representation of displacements across the thickness,” Composites Part B: Engineering, vol. 42, no. 1, pp. 18–26, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Shariyat, “Thermal buckling analysis of rectangular composite plates with temperature-dependent properties based on a layerwise theory,” Thin-Walled Structures, vol. 45, no. 4, pp. 439–452, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. V. V. Novozhilov, The Theory of Thin Shells, P. Noordhoff, Groningen, The Netherlands, 1959.
  22. A. E. H. Love, A Treatise on the Mathematical Theory of Elasticity, Dover, New York, NY, USA, 1944.
  23. W. H. Press, S. A. Teukolsky, W. T. Vetterling, and B. P. Flannery, Numerical Recipes, Cambridge University Press, New York, NY, USA, 3rd edition, 2007.
  24. D. J. Hoffman, Numerical Methods for Engineers and Scientists, McGraw-Hill, New York, NY, USA, 2001.