Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2012 (2012), Article ID 145974, 22 pages
http://dx.doi.org/10.1155/2012/145974
Review Article

Artificial Intelligence in Civil Engineering

1Faculty of Civil Engineering & Architecture, Zhejiang University of Technology, Hangzhou 310023, China
2College of Computer Science & Technology, Zhejiang University of Technology, Hangzhou 310023, China

Received 3 October 2012; Accepted 5 November 2012

Academic Editor: Fei Kang

Copyright © 2012 Pengzhen Lu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Artificial intelligence, 2012, http://en.wikipedia.org/wiki/Artificial_intelligence.
  2. Y. Kao, M. H. Chen, and Y. T. Huang, “A hybrid algorithm based on ACO and PSO for capacitated vehicle routing problems,” Mathematical Problems in Engineering, vol. 2012, Article ID 726564, 2012. View at Google Scholar
  3. S. Y. Chen, Y. Zheng, C. Cattani, and W. Wang, “Modeling of biological intelligence for SCM system optimization,” Computational and Mathematical Methods in Medicine, vol. 2012, Article ID 769702, 30 pages, 2012. View at Google Scholar · View at Zentralblatt MATH
  4. History of Artificial Intelligence, 2012, http://en.wikipedia.org/wiki/History_of_artificial_intelligence.
  5. B. Adam and I. F. C. Smith, “Active tensegrity: a control framework for an adaptive civil-engineering structure,” Computers and Structures, vol. 86, no. 23-24, pp. 2215–2223, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. M. T. Bassuoni and M. L. Nehdi, “Neuro-fuzzy based prediction of the durability of self-consolidating concrete to various sodium sulfate exposure regimes,” Computers and Concrete, vol. 5, no. 6, pp. 573–597, 2008. View at Google Scholar · View at Scopus
  7. B. K. R. Prasad, H. Eskandari, and B. V. V. Reddy, “Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN,” Construction and Building Materials, vol. 23, no. 1, pp. 117–128, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. T. L. Lee, H. M. Lin, and Y. P. Lu, “Assessment of highway slope failure using neural networks,” Journal of Zhejiang University: Science A, vol. 10, no. 1, pp. 101–108, 2009. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  9. A. A. Shaheen, A. R. Fayek, and S. M. Abourizk, “Methodology for integrating fuzzy expert systems and discrete event simulation in construction engineering,” Canadian Journal of Civil Engineering, vol. 36, no. 9, pp. 1478–1490, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. S. K. Das, P. Samui, and A. K. Sabat, “Application of artificial intelligence to maximum dry density and unconfined compressive strength of cement stabilized soil,” Geotechnical and Geological Engineering, vol. 29, no. 3, pp. 329–342, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Forcael, C. R. Glagola, and V. Gonzalez, “Incorporation of computer simulations into teaching linear scheduling techniques,” Journal of Professional Issues in Engineering Education and Practice, vol. 138, no. 1, pp. 21–30, 2012. View at Publisher · View at Google Scholar
  12. P. Krcaronemen and Z. Kouba, “Ontology-driven information system design,” IEEE Transactions on Systems, Man and Cybernetics C, vol. 42, no. 3, 2012. View at Google Scholar
  13. J. H. Holland, Adaptation in Natural and Artificial Systems, The University of Michigan Press, Ann Arbor, Mich, USA, 1975.
  14. A. Senouci and H. R. Al-Derham, “Genetic algorithm-based multi-objective model for scheduling of linear construction projects,” Advances in Engineering Software, vol. 39, no. 12, pp. 1023–1028, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. J. D. Farmer, N. H. Packard, and A. S. Perelson, “The immune system, adaptation, and machine learning,” Physica D, vol. 22, no. 1–3, pp. 187–204, 1986. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Dessalegne and J. W. Nicklow, “Artificial life algorithm for management of multi-reservoir river systems,” Water Resources Management, vol. 26, no. 5, pp. 1125–1141, 2012. View at Publisher · View at Google Scholar
  17. W. Banzhaf, P. Nordin, R. E. Keller, and F. D. Francone, Genetic Programming: An Introduction: On the Automatic Evolution of Computer Programs and Its Applications, Morgan Kaufmann, 1998.
  18. P. Aminian, M. R. Javid, A. Asghari, A. H. Gandomi, and M. A. Esmaeili, “A robust predictive model for base shear of steel frame structures using a hybrid genetic programming and simulated annealing method,” Neural Computing and Applications, vol. 20, no. 8, pp. 1321–1332, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Hsie, Y. F. Ho, C. T. Lin, and I. C. Yeh, “Modeling asphalt pavement overlay transverse cracks using the genetic operation tree and Levenberg-Marquardt Method,” Expert Systems with Applications, vol. 39, no. 5, pp. 4874–4881, 2012. View at Publisher · View at Google Scholar
  20. A. Cevik and I. H. Guzelbey, “A soft computing based approach for the prediction of ultimate strength of metal plates in compression,” Engineering Structures, vol. 29, no. 3, pp. 383–394, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. J. M. Caicedo and G. Yun, “A novel evolutionary algorithm for identifying multiple alternative solutions in model updating,” Structural Health Monitoring—An International Journal, vol. 10, no. 5, pp. 491–501, 2011. View at Publisher · View at Google Scholar
  22. A. Khalafallah and M. Abdel-Raheem, “Electimize: new evolutionary algorithm for optimization with application in construction engineering,” Journal of Computing in Civil Engineering, vol. 25, no. 3, pp. 192–201, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Ahangar-Asr, A. Faramarzi, and A. A. Javadi, “A new approach for prediction of the stability of soil and rock slopes,” Engineering Computations (Swansea, Wales), vol. 27, no. 7, pp. 878–893, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Rezania, A. A. Javadi, and O. Giustolisi, “An evolutionary-based data mining technique for assessment of civil engineering systems,” Engineering Computations (Swansea, Wales), vol. 25, no. 6, pp. 500–517, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. M. I. Solihin, Wahyudi, M. A. S. Kamal, and A. Legowo, “Optimal PID controller tuning of automatic gantry crane using PSO algorithm,” in Proceedings of the 5th International Symposium on Mechatronics and its Applications (ISMA '08), May 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. T. Wang, G. Wang, K. Liu, and S. Zhou, “Simulation control of concrete pump truck boom based on PSO and gravity compensation,” in Proceedings of the 2nd International Symposium on Intelligent Information Technology Application (IITA '08), pp. 494–497, December 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. L. Wang, Y. Zhou, and W. Zhao, “Comparative study on bionic optimization algorithms for sewer optimal design,” in Proceedings of the 5th International Conference on Natural Computation (ICNC '09), pp. 24–29, August 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. H. Shayeghi, H. Eimani Kalasar, H. Shayanfar, and A. Shayeghi, “PSO based TMD design for vibration control of tall building structures,” in Proceedings of the International Conference on Artificial Intelligence (ICAI '09), 2009.
  29. S. F. Ali and A. Ramaswamy, “Optimal fuzzy logic control for MDOF structural systems using evolutionary algorithms,” Engineering Applications of Artificial Intelligence, vol. 22, no. 3, pp. 407–419, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Filiberto, R. Bello, Y. Caballero, and R. Larrua, “Using PSO and RST to predict the resistant capacity of connections in composite structures,” Studies in Computational Intelligence, vol. 284, pp. 359–370, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. A. Schmidt, The Design of an Active Structural Vibration Reduction System Using a Modified Particle Swarm Optimization, 2010.
  32. X. Zheng and Z. Liu, “The schedule control of engineering project based on particle swarm algorithm,” in Proceedings of the 2nd International Conference on Communication Systems, Networks and Applications (ICCSNA '10), pp. 184–187, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. H. C. Tsai, “Predicting strengths of concrete-type specimens using hybrid multilayer perceptrons with center-unified particle swarm optimization,” Expert Systems with Applications, vol. 37, no. 2, pp. 1104–1112, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. M. Marinaki, Y. Marinakis, and G. E. Stavroulakis, “Fuzzy control optimized by PSO for vibration suppression of beams,” Control Engineering Practice, vol. 18, no. 6, pp. 618–629, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Nejadfard, H. Moradi, and M. Ahmadabadi, “A multi-robot system for dome inspection and maintenance: concept and stability analysis,” in Proceedings of the IEEE International Conference on Robotics and Biomimetics (ROBIO '11), 2011. View at Publisher · View at Google Scholar
  36. V. Raju, D. Maheswari, and S. Patnaik, “Active vibration control of piezo actuated cantilever beam using PSO,” in Proceedings of the IEEE Students' Conference on Electrical, Electronics and Computer Science (SCEECS '12), 2012. View at Publisher · View at Google Scholar
  37. A. Kaveh and S. Talatahari, “An improved ant colony optimization for constrained engineering design problems,” Engineering Computations (Swansea, Wales), vol. 27, no. 1, pp. 155–182, 2010. View at Publisher · View at Google Scholar · View at Scopus
  38. K. Doerner, W. J. Gutjahr, R. F. Hartl, C. Strauss, and C. Stummer, “Pareto ant colony optimization: a metaheuristic approach to multiobjective portfolio selection,” Annals of Operations Research, vol. 131, no. 1-4, pp. 79–99, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  39. I. Flood, “Towards the next generation of artificial neural networks for civil engineering,” Advanced Engineering Informatics, vol. 22, no. 1, pp. 4–14, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. S. Sharma and A. Das, “Backcalculation of pavement layer moduli from falling weight deflectometer data using an artificial neural network,” Canadian Journal of Civil Engineering, vol. 35, no. 1, pp. 57–66, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. R. Bendaña, A. Del Caño, and M. P. De La Cruz, “Contractor selection: Fuzzy-control approach,” Canadian Journal of Civil Engineering, vol. 35, no. 5, pp. 473–486, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Bilgil and H. Altun, “Investigation of flow resistance in smooth open channels using artificial neural networks,” Flow Measurement and Instrumentation, vol. 19, no. 6, pp. 404–408, 2008. View at Publisher · View at Google Scholar · View at Scopus
  43. Z. Q. Gu and S. O. Gu, “Diagonal recurrent neural networks for MDOF structural vibration control,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 130, no. 6, Article ID 061001, 2008. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Laflamme and J. J. Connor, “Application of self-tuning Gaussian networks for control of civil structures equipped with magnetorheological dampers,” in Active and Passive Smart Structures and Integrated Systems 2009, vol. 7288 of Proceedings of the SPIE, The International Society for Optical Engineering, March 2009. View at Publisher · View at Google Scholar · View at Scopus
  45. T. L. Lee, H. M. Lin, and Y. P. Lu, “Assessment of highway slope failure using neural networks,” Journal of Zhejiang University: Science A, vol. 10, no. 1, pp. 101–108, 2009. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  46. F. Xiao and S. N. Amirkhanian, “Effects of binders on resilient modulus of rubberized mixtures containing RAP using artificial neural network approach,” Journal of Testing and Evaluation, vol. 37, no. 2, pp. 129–138, 2009. View at Google Scholar · View at Scopus
  47. B. Benchmark and S. Narasimhan, “Robust direct adaptive controller for the nonlinear highway,” Structural Control and Health Monitoring, vol. 16, no. 6, pp. 599–612, 2009. View at Publisher · View at Google Scholar · View at Scopus
  48. J. Zhang and F. Haghighat, “Development of Artificial Neural Network based heat convection algorithm for thermal simulation of large rectangular cross-sectional area Earth-to-Air Heat Exchangers,” Energy and Buildings, vol. 42, no. 4, pp. 435–440, 2010. View at Publisher · View at Google Scholar · View at Scopus
  49. V. Yveras, “Performance prediction method in the early design stage for outdoor ventilated crawl spaces based on artificial neural networks,” Journal of Building Physics, vol. 34, no. 1, pp. 43–56, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. H. Rahman, K. Alireza, and G. Reza, “Application of artificial neural network, kriging, and inverse distance weighting models for estimation of scour depth around bridge pier with bed sill,” Journal of Software Engineering and Applications, vol. 3, no. 10, 2010. View at Google Scholar
  51. X. Z. Wang, X. C. Duan, and J. Y. Liu, “Application of neural network in the cost estimation of highway engineering,” Journal of Computers, vol. 5, no. 11, pp. 1762–1766, 2010. View at Publisher · View at Google Scholar · View at Scopus
  52. D. R. Parhi and A. K. Dash, “Application of neural networks and finite elements for condition monitoring of structures,” Proceedings of the Institution of Mechanical Engineers C, vol. 225, no. 6, pp. 1329–1339, 2011. View at Publisher · View at Google Scholar · View at Scopus
  53. X. Gui, X. Zheng, J. Song, and X. Peng, “Automation bridge design and structural optimization,” Applied Mechanics and Materials, vol. 63-64, pp. 457–460, 2011. View at Publisher · View at Google Scholar · View at Scopus
  54. S. N. Alacali, B. Akba, and B. Doran, “Prediction of lateral confinement coefficient in reinforced concrete columns using neural network simulation,” Applied Soft Computing Journal, vol. 11, no. 2, pp. 2645–2655, 2011. View at Publisher · View at Google Scholar · View at Scopus
  55. J. Li, U. Dackermann, Y. L. Xu, and B. Samali, “Damage identification in civil engineering structures utilizing PCA-compressed residual frequency response functions and neural network ensembles,” Structural Control and Health Monitoring, vol. 18, no. 2, pp. 207–226, 2011. View at Publisher · View at Google Scholar · View at Scopus
  56. J. Liu, H. Li, and C. He, “Predicting the compressive strength of concrete using rebound method and artificial neural network,” ICIC Express Letters, vol. 5, no. 4, pp. 1115–1120, 2011. View at Google Scholar · View at Scopus
  57. M. Y. Cheng, H. C. Tsai, and E. Sudjono, “Evaluating subcontractor performance using evolutionary fuzzy hybrid neural network,” International Journal of Project Management, vol. 29, no. 3, pp. 349–356, 2011. View at Publisher · View at Google Scholar · View at Scopus
  58. P. B. Cachim, “Using artificial neural networks for calculation of temperatures in timber under fire loading,” Construction and Building Materials, vol. 25, no. 11, pp. 4175–4180, 2011. View at Publisher · View at Google Scholar · View at Scopus
  59. S. Arangio and J. Beck, “Bayesian neural networks for bridge integrity assessment,” Structural Control & Health Monitoring, vol. 19, no. 1, pp. 3–21, 2012. View at Publisher · View at Google Scholar
  60. M. H. Fazel Zarandi, I. B. Türksen, J. Sobhani, and A. A. Ramezanianpour, “Fuzzy polynomial neural networks for approximation of the compressive strength of concrete,” Applied Soft Computing Journal, vol. 8, no. 1, pp. 488–498, 2008. View at Publisher · View at Google Scholar · View at Scopus
  61. M. A. Hossain, A. A. M. Madkour, K. P. Dahal, and H. Yu, “Comparative performance of intelligent algorithms for system identification and control,” Journal of Intelligent Systems, vol. 17, no. 4, pp. 313–329, 2008. View at Google Scholar · View at Scopus
  62. M. Y. Cheng, H. S. Peng, Y. W. Wu, and T. L. Chen, “Estimate at completion for construction projects using evolutionary support vector machine inference model,” Automation in Construction, vol. 19, no. 5, pp. 619–629, 2010. View at Publisher · View at Google Scholar · View at Scopus
  63. J. Sobhani and A. A. Ramezanianpour, “Service life of the reinforced concrete bridge deck in corrosive environments: A soft computing system,” Applied Soft Computing Journal, vol. 11, no. 4, pp. 3333–3346, 2011. View at Publisher · View at Google Scholar · View at Scopus
  64. Y. Q. Guo, S. M. Fei, and Z. D. Xu, “Simulation analysis on intelligent structures with magnetorheological dampers,” Journal of Intelligent Material Systems and Structures, vol. 19, no. 6, pp. 715–726, 2008. View at Publisher · View at Google Scholar · View at Scopus
  65. K. M. Choi, H. J. Jung, H. J. Lee, and S. W. Cho, “Seismic protection of base-isolated building with nonlinear isolation system using smart passive control strategy,” Structural Control and Health Monitoring, vol. 15, no. 5, pp. 785–796, 2008. View at Publisher · View at Google Scholar · View at Scopus
  66. V. E. Omurlu, S. N. Engin, and I. Yüksek, “Application of fuzzy PID control to cluster control of viaduct road vibrations,” JVC/Journal of Vibration and Control, vol. 14, no. 8, pp. 1201–1215, 2008. View at Publisher · View at Google Scholar · View at Scopus
  67. R. Guclu and H. Yazici, “Vibration control of a structure with ATMD against earthquake using fuzzy logic controllers,” Journal of Sound and Vibration, vol. 318, no. 1-2, pp. 36–49, 2008. View at Publisher · View at Google Scholar · View at Scopus
  68. O. E. Ozbulut and S. Hurlebaus, “A temperature- and strain-rate-dependent model of NiTi shape memory alloys for seismic control of bridges,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2009, usa, March 2009. View at Publisher · View at Google Scholar · View at Scopus
  69. A. A. Shaheen, A. R. Fayek, and S. M. Abourizk, “Methodology for integrating fuzzy expert systems and discrete event simulation in construction engineering,” Canadian Journal of Civil Engineering, vol. 36, no. 9, pp. 1478–1490, 2009. View at Publisher · View at Google Scholar · View at Scopus
  70. C. W. Chen, K. Yeh, and K. F. R. Liu, “Adaptive fuzzy sliding mode control for seismically excited bridges with lead rubber bearing isolation,” International Journal of Uncertainty, Fuzziness and Knowlege-Based Systems, vol. 17, no. 5, pp. 705–727, 2009. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  71. A. Bianchini and P. Bandini, “Prediction of pavement performance through neuro-fuzzy reasoning,” Computer-Aided Civil and Infrastructure Engineering, vol. 25, no. 1, pp. 39–54, 2010. View at Publisher · View at Google Scholar · View at Scopus
  72. O. E. Ozbulut and S. Hurlebaus, “Fuzzy control of piezoelectric friction dampers for seismic protection of smart base isolated buildings,” Bulletin of Earthquake Engineering, vol. 8, no. 6, pp. 1435–1455, 2010. View at Publisher · View at Google Scholar · View at Scopus
  73. Q. Meng, M. Zhang, and J. Ye, “Fuzzy control strategy based on mode identification Used in semi-active control,” Applied Mechanics and Materials, vol. 71–78, pp. 3975–3982, 2011. View at Google Scholar
  74. A. Nieto-Morote and F. Ruz-Vila, “A fuzzy approach to construction project risk assessment,” International Journal of Project Management, vol. 29, no. 2, pp. 220–231, 2011. View at Publisher · View at Google Scholar · View at Scopus
  75. P. Rosko, “Structural topology optimization with fuzzy constraint,” in 4th International Conference on Machine Vision (ICMV '11): Computer Vision and Image Analysis; Pattern Recognition and Basic Technologies, vol. 8350 of Proceedings of the SPIE, The International Society for Optical Engineering, 2011.
  76. H. Gonzalez-Jorge, D. Gonzalez-Aguilera, P. Rodriguez-Gonzalvez, and P. Arias, “Monitoring biological crusts in civil engineering structures using intensity data from terrestrial laser scanners,” Construction and Building Materials, vol. 31, pp. 119–128, 2012. View at Publisher · View at Google Scholar
  77. O. Yakut and H. Alli, “Application of neural based fuzzy logic sliding mode control with moving sliding surface for the seismic isolation of a building with active tendon,” Journal of Intelligent & Fuzzy Systems, vol. 20, no. 6, pp. 235–256, 2009. View at Google Scholar · View at Zentralblatt MATH
  78. J. Mahjoobi, A. Etemad-Shahidi, and M. H. Kazeminezhad, “Hindcasting of wave parameters using different soft computing methods,” Applied Ocean Research, vol. 30, no. 1, pp. 28–36, 2008. View at Publisher · View at Google Scholar · View at Scopus
  79. A. Golroo and S. L. Tighe, “Development of pervious concrete pavement performance models using expert opinions,” Journal of Transportation Engineering-Asce, vol. 138, no. 5, pp. 634–648, 2012. View at Publisher · View at Google Scholar
  80. D. Grau, W. E. Back, and J. R. Prince, “Database expert planning system for on-site design strategies,” Journal of Computing in Civil Engineering, vol. 26, no. 1, pp. 64–75, 2012. View at Publisher · View at Google Scholar
  81. M. Neshat and A. Adeli, “Designing a fuzzy expert system to predict the concrete mix design,” in Proceedings of the IEEE International Conference on Computational Intelligence for Measurement Systems and Applications (CIMSA '11), pp. 80–85, 2011.
  82. O. Sariyar and D. N. Ural, “Expert system approach for soil structure interaction and land use,” Journal of Urban Planning and Development, vol. 136, no. 2, pp. 135–138, 2010. View at Publisher · View at Google Scholar · View at Scopus
  83. R. Gupta, M. A. Kewalramani, and A. Goel, “Prediction of concrete strength using neural-expert system,” Journal of Materials in Civil Engineering, vol. 18, no. 3, pp. 462–466, 2006. View at Publisher · View at Google Scholar · View at Scopus
  84. K. W. Chau and F. Albermani, “A coupled knowledge-based expert system for design of liquid-retaining structures,” Automation in Construction, vol. 12, no. 5, pp. 589–602, 2003. View at Publisher · View at Google Scholar · View at Scopus
  85. M. F. M. Zain, M. N. Islam, and I. H. Basri, “An expert system for mix design of high performance concrete,” Advances in Engineering Software, vol. 36, no. 5, pp. 325–337, 2005. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  86. A. Kazaz, “Application of an expert system on the fracture mechanics of concrete,” Artificial Intelligence Review, vol. 19, no. 2, pp. 177–190, 2003. View at Publisher · View at Google Scholar · View at Scopus
  87. A. B. Göktepe, A. H. Lav, S. Altun, and G. Altintaş, “Fuzzy decision support system to determine swell/shrink factor affecting earthwork optimization of highways,” Mathematical and Computational Applications, vol. 13, no. 1, pp. 61–70, 2008. View at Google Scholar · View at Scopus
  88. M. Zanaganeh, S. J. Mousavi, and A. F. Etemad Shahidi, “A hybrid genetic algorithm-adaptive network-based fuzzy inference system in prediction of wave parameters,” Engineering Applications of Artificial Intelligence, vol. 22, no. 8, pp. 1194–1202, 2009. View at Publisher · View at Google Scholar · View at Scopus
  89. A. Bianchini and P. Bandini, “Prediction of pavement performance through neuro-fuzzy reasoning,” Computer-Aided Civil and Infrastructure Engineering, vol. 25, no. 1, pp. 39–54, 2010. View at Publisher · View at Google Scholar · View at Scopus
  90. M. Eliseo, J. Parente de Oliveira, and S. Pellegrino, “Domain ontology with temporal descriptions for architectural buildings as a support for learning history of architecture,” IEEE Multidisciplinary Engineering Education Magazine, vol. 6, no. 2, 2011. View at Google Scholar
  91. N. Lee and A. Mita, “Sensor agent robot with servo-accelerometer for structural health monitoring,” Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 8345, parts 1 and 2, 2012. View at Google Scholar
  92. N. El-Sawalhi, D. Eaton, and R. Rustom, “Forecasting contractor performance using a neural network and genetic algorithm in a pre-qualification model,” Construction Innovation, vol. 8, no. 4, 2008. View at Google Scholar
  93. J. Lee and L. E. Bernold, “Ubiquitous agent-based communication in construction,” Journal of Computing in Civil Engineering, vol. 22, no. 1, pp. 31–39, 2008. View at Publisher · View at Google Scholar · View at Scopus
  94. M. Kovacevic, J. Y. Nie, and C. Davidson, “Providing answers to questions from automatically collected web pages for intelligent decision making in the construction sector,” Journal of Computing in Civil Engineering, vol. 22, no. 1, pp. 3–13, 2008. View at Publisher · View at Google Scholar · View at Scopus
  95. W. J. O'Brien, C. Julien, S. Kabadayi, X. Luo, and J. Hammer, “An architecture for decision support in ad hoc sensor networks,” Electronic Journal of Information Technology in Construction, vol. 14, pp. 309–327, 2009. View at Google Scholar · View at Scopus
  96. R. Luna, R. Hall, M. Hilgers, and G. E. Louis, “GIS learning tool for civil engineers,” International Journal of Engineering Education, vol. 26, no. 1, pp. 52–58, 2010. View at Google Scholar · View at Scopus
  97. A. Singh, B. S. Minsker, and P. Bajcsy, “Image-based machine learning for reduction of user fatigue in an interactive model calibration system,” Journal of Computing in Civil Engineering, vol. 24, no. 3, pp. 241–251, 2010. View at Publisher · View at Google Scholar · View at Scopus
  98. P. Thompson, “Teaching sustainability in civil engineering using Ceequal,” Proceedings of the Institution of Civil Engineers: Engineering Sustainability, vol. 163, no. 4, pp. 209–217, 2010. View at Publisher · View at Google Scholar · View at Scopus
  99. E. Obonyo, “An agent-based intelligent virtual learning environment for construction management,” Construction Innovation, vol. 11, no. 2, 2011. View at Google Scholar
  100. S. Zhu, F. Xie, and D. Levinson, “Enhancing transportation education through online simulation using an agent-based demand and assignment model,” Journal of Professional Issues in Engineering Education and Practice, vol. 137, no. 1, pp. 38–45, 2011. View at Publisher · View at Google Scholar · View at Scopus
  101. S. K. Das, P. Samui, and A. K. Sabat, “Application of artificial intelligence to maximum dry density and unconfined compressive strength of cement stabilized soil,” Geotechnical and Geological Engineering, vol. 29, no. 3, pp. 329–342, 2011. View at Publisher · View at Google Scholar · View at Scopus
  102. T. A. Newson and N. J. Delatte, “Case methods in civil engineering teaching,” Canadian Journal of Civil Engineering, vol. 38, no. 9, pp. 1016–1030, 2011. View at Google Scholar
  103. X. Lu, D. Clements-Croome, and M. Viljanen, “Integration of chaos theory and mathematical models in building simulation—part II: conceptual frameworks,” Automation in Construction, vol. 19, no. 4, pp. 452–457, 2010. View at Publisher · View at Google Scholar · View at Scopus
  104. V. Kardashov, S. Einav, Y. Okrent, and T. Kardashov, “Nonlinear reaction-diffusion models of self-organization and deterministic chaos: theory and possible applications to description of electrical cardiac activity and cardiovascular circulation,” Discrete Dynamics in Nature and Society, vol. 2006, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  105. I. Durgun and A. R. Yildiz, “Structural design optimization of vehicle components using cuckoo search algorithm,” Materials Testing, vol. 54, no. 3, pp. 185–188, 2012. View at Google Scholar
  106. S. Walton, O. Hassan, K. Morgan, and M. Brown, “Modified Cuckoo Search: a new gradient free optimisation algorithm,” Chaos Solitons & Fractals, vol. 44, no. 9, pp. 710–718, 2011. View at Publisher · View at Google Scholar
  107. X. T. Li and M. H. Yin, “Parameter estimation for chaotic systems using the cuckoo search algorithm with an orthogonal learning method,” Chinese Physics B, vol. 21, no. 5, Article ID 050507, 2012. View at Google Scholar
  108. A. H. Gandomi, X. S. Yang, and A. H. Alavi, “Mixed variable structural optimization using Firefly Algorithm,” Computers & Structures, vol. 89, no. 23-24, pp. 2325–2336, 2011. View at Publisher · View at Google Scholar
  109. S. Lukasik and S. Zak, Firefly Algorithm for Continuous Constrained Optimization Tasks, 2009.
  110. Y. Xin-She, “Firefly algorithm, stochastic test functions and design optimisation,” International Journal of Bio-Inspired Computation, vol. 2, no. 2, pp. 78–84, 2010. View at Publisher · View at Google Scholar
  111. S. M. Sapuan, “A knowledge-based system for materials selection in mechanical engineering design,” Materials and Design, vol. 22, no. 8, pp. 687–695, 2001. View at Publisher · View at Google Scholar · View at Scopus
  112. P. J. Lovett, A. Ingram, and C. N. Bancroft, “Knowledge-based engineering for SMEs—a methodology,” Journal of Materials Processing Technology, vol. 107, no. 1–3, pp. 384–389, 2000. View at Publisher · View at Google Scholar · View at Scopus
  113. C. B. Chapman and M. Pinfold, “Design engineering—a need to rethink the solution using knowledge based engineering,” Knowledge-Based Systems, vol. 12, no. 5-6, pp. 257–267, 1999. View at Publisher · View at Google Scholar · View at Scopus
  114. J. Kulon, P. Broomhead, and D. J. Mynors, “Applying knowledge-based engineering to traditional manufacturing design,” International Journal of Advanced Manufacturing Technology, vol. 30, no. 9-10, pp. 945–951, 2006. View at Publisher · View at Google Scholar · View at Scopus
  115. S. W. Mahfoud and D. E. Goldberg, “Parallel recombinative simulated annealing: a genetic algorithm,” Parallel Computing, vol. 21, no. 1, pp. 1–28, 1995. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  116. A. Dekkers and E. Aarts, “Global optimization and simulated annealing,” Mathematical Programming B, vol. 50, no. 3, pp. 367–393, 1991. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  117. K. Bouleimen and H. Lecocq, “A new efficient simulated annealing algorithm for the resource-constrained project scheduling problem and its multiple mode version,” European Journal of Operational Research, vol. 149, no. 2, pp. 268–281, 2003. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  118. L. Chen and K. Aihara, “Chaotic simulated annealing by a neural network model with transient chaos,” Neural Networks, vol. 8, no. 6, pp. 915–930, 1995. View at Publisher · View at Google Scholar · View at Scopus
  119. R. Prada and A. Paiva, “Teaming up humans with autonomous synthetic characters,” Artificial Intelligence, vol. 173, no. 1, pp. 80–103, 2009. View at Publisher · View at Google Scholar · View at Scopus