Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2012, Article ID 832836, 21 pages
http://dx.doi.org/10.1155/2012/832836
Research Article

Data-Driven Adaptive Observer for Fault Diagnosis

1Research Institute of Intelligent Control and Systems, Harbin Institute of Technology, Harbin 150001, China
2Faculty of Engineering and Science, University of Agder, 4898 Grimstad, Norway

Received 25 June 2012; Accepted 12 August 2012

Academic Editor: Bo Shen

Copyright © 2012 Shen Yin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Gertler, Fault Detection and Diagnosis in Engineering Systems, Marcel Dekker, New York, NY, USA, 1998.
  2. J. Chen and R. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems, Kluwer Academic, Norwell, Mass, USA, 1999. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  3. R. Patton, P. Frank, and R. Clark, Issues of Fault Diagnosis for Dynamic Systems, Springer, Berlin, Germany, 2000.
  4. M. Blanke, M. Kinnaert, J. Lunze, M. Staroswiecki, and J. Schröder, Diagnosis and Fault-Tolerant Control, Springer, Berlin, Germany, 2006. View at Zentralblatt MATH
  5. R. Isermann, Fault Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance, Springer, Berlin, Germany, 2006.
  6. S. Ding, Model-Based Fault Diagnosis Techniques, Springer, Berlin, Germany, 2008. View at Zentralblatt MATH
  7. L. Ljung, System Identification: Theory for the User, Prentice Hall, Englewood Cliffs, NJ, USA, 1987.
  8. P. V. Overschee and B. D. Moor, Subspace Identification for Linear Systems, Kluwer Academic, Dordrecht, The Netherlands, 1996.
  9. W. Favoreel, B. De Moor, and P. Van Overschee, “Subspace state space system identification for industrial processes,” Journal of Process Control, vol. 10, no. 2-3, pp. 149–155, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Qin, “An overview of subspace identification,” Computers and Chemical Engineering, vol. 30, no. 10–12, pp. 1502–1513, 2006. View at Publisher · View at Google Scholar
  11. I. Hwang, S. Kim, Y. Kim, and C. E. Seah, “A survey of fault detection, isolation, and reconfiguration methods,” IEEE Transactions on Control Systems Technology, vol. 18, no. 3, pp. 636–653, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. V. Venkatasubramanian, R. Rengaswamy, K. Yin, and S. Kavuri, “A review of process fault detection and diagnosis. Part I: Quantitative model-based methods,” Computers and Chemical Engineering, vol. 27, pp. 293–311, 2003. View at Google Scholar
  13. P. Zhang and S. Ding, “On fault detection in linear discrete-time, periodic, and sampled-data systems (survey),” Journal of Control Science and Engineering, vol. 2008, Article ID 849546, 19 pages, 2008. View at Google Scholar
  14. B. Shen, Z. Wang, H. Shu, and G. Wei, “Robust H finite-horizon filtering with randomly occurred nonlinearities and quantization effects,” Automatica, vol. 46, no. 11, pp. 1743–1751, 2010. View at Publisher · View at Google Scholar
  15. B. Shen, Z. Wang, and Y. S. Hung, “Distributed H-consensus filtering in sensor networks with multiple missing measurements: the finite-horizon case,” Automatica, vol. 46, no. 10, pp. 1682–1688, 2010. View at Publisher · View at Google Scholar
  16. H. Dong, Z. Wang, D. W. C. Ho, and H. Gao, “Robust H filtering for Markovian jump systems with randomly occurring nonlinearities and sensor saturation: the finite-horizon case,” IEEE Transactions on Signal Processing, vol. 59, no. 7, pp. 3048–3057, 2011. View at Publisher · View at Google Scholar
  17. H. Dong, Z. Wang, J. Lam, and H. Gao, “Fuzzy-model-based robust fault detection with stochastic mixed time-delays and successive packet dropouts,” IEEE Transactions on Systems, Man, and Cybernetics, vol. 42, no. 3, part B, pp. 365–376, 2012. View at Google Scholar
  18. S. X. Ding, P. Zhang, B. Huang, and E. L. Ding, “Subspace method aided data-driven design of observer based fault detection systems,” in Proceedings of the 16th Triennial World Congress of International Federation of Automatic Control (IFAC '05), pp. 167–172, Prague, Czech Republic, July 2005. View at Scopus
  19. S. Ding, S. Yin, P. Zhang, E. Ding, and A. Naik, “An approach to data-driven adaptive residual generator design and implementation,” in Proceedings of the 7th IFAC Symposium on Fault Detection and Supervision and Safety of Technical Processes, Barcelona, Spain, 2009.
  20. S. X. Ding, P. Zhang, A. Naik, E. L. Ding, and B. Huang, “Subspace method aided data-driven design of fault detection and isolation systems,” Journal of Process Control, vol. 19, no. 9, pp. 1496–1510, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Yin, A. Naik, and S. Ding, “Data-driven design of fault diagnosis scheme for periodic systems,” in Proceedings of the 7th Workshop on Advanced Control and Diagnosis, Zielona Gora, Poland, 2009. View at Publisher · View at Google Scholar
  22. S. Ding, S. Yin, Y. Wang, Y. Wang, Y. Yang, and B. Ni, “Data-driven design of observers and its applications,” in Proceedings of the 18th IFAC World Congress, Milano, Italy, 2011.
  23. S. Ding, P. Zhang, E. Ding, P. Engel, and W. Gui, “A survey of the application of basic data-driven and model-based methods in process monitoring and fault diagnosis,” in Proceedings of the 18th IFAC World Congress, Milano, Italy, 2011.
  24. L. Chiang, E. Russell, and R. Braatz, Fault Detection and Diagnosis in Industrial Systems, Springer, London, UK, 2001. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  25. P. Ioannou and J. Sun, Robust Adaptive Control, Prentice Hall, 1996.
  26. G. Tao, Adaptive Control Design and Analysis, Wiley-Interscience, Hoboken, NJ, USA, 2003. View at Publisher · View at Google Scholar
  27. K. Astrom and B. Wittenmark, Adaptive Control, Addison-Wesley, 1995.
  28. B. W. Silverman, Density Estimation for Statistics and Data Analysis, Chapman & Hall, London, UK, 1986.
  29. E. Martin and A. Morris, “Non-parametric confidence bounds for process performance monitoring charts,” Journal of Process Control, vol. 6, no. 6, pp. 349–358, 1996. View at Publisher · View at Google Scholar
  30. X. Zhang, M. Polycarpou, and T. Parisini, “Design and analysis of fault isolation scheme for a class of uncertain nonlinear systems,” Annual Reviews in Control, vol. 32, pp. 107–121, 2008. View at Publisher · View at Google Scholar