Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2013 (2013), Article ID 163839, 7 pages
http://dx.doi.org/10.1155/2013/163839
Research Article

CFD Simulation of Heat Transfer and Friction Factor Augmentation in a Circular Tube Fitted with Elliptic-Cut Twisted Tape Inserts

1Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
2Biochemical Engineering Department, Al-Khwarizmi College of Engineering, University of Baghdad, Baghdad 47024, Iraq

Received 30 April 2013; Accepted 10 June 2013

Academic Editor: Tirivanhu Chinyoka

Copyright © 2013 Sami D. Salman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Sami D. Salman, Abdul Amir H. Kadhum, Mohd S. Takriff, and Abu Bakar Mohamad, “CFD Simulation of Heat Transfer and Friction Factor Augmentation in a Circular Tube Fitted with Elliptic-Cut Twisted Tape Inserts,” Mathematical Problems in Engineering, vol. 2013, Article ID 163839, 7 pages, 2013. doi:10.1155/2013/163839