Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2013, Article ID 758961, 13 pages
http://dx.doi.org/10.1155/2013/758961
Research Article

Experimental Study on Communication Delay of Powertrain System of Plug-In Hybrid Electric Vehicles

1School of Automotive Engineering, Harbin Institute of Technology, Weihai 264209, China
2China Automotive Technology & Research Center, Tianjin 300300, China

Received 9 September 2013; Revised 16 October 2013; Accepted 16 October 2013

Academic Editor: Hui Zhang

Copyright © 2013 Dafang Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Shuai, H. Zhang, J. Wang, J. Li, and M. Ouyang, “Combined AFS and DYC control of four-wheel-independent-drive electric vehicles over CAN network with time-varying delays,” IEEE Transactions on Vehicular Technology, 2013. View at Publisher · View at Google Scholar
  2. H. Zhang, Y. Shi, and J. Wang, “Observer-based tracking controller design for networked predictive control systems with uncertain Markov delays,” International Journal of Control, vol. 86, no. 10, pp. 1824–1836, 2013. View at Publisher · View at Google Scholar
  3. H. Zhang, Y. Shi, and M. X. Liu, “H step tracking control for networked discrete-time nonlinear systems with integral and predictive actions,” IEEE Transactions on Industrial Informatics, vol. 9, no. 1, pp. 337–345, 2013. View at Publisher · View at Google Scholar
  4. H. Zhang, Y. Shi, and A. Saadat Mehr, “Robust static output feedback control and remote PID design for networked motor systems,” IEEE Transactions on Industrial Electronics, vol. 58, no. 12, pp. 5396–5405, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Zhang, Y. Shi, and A. S. Mehr, “Robust weighted Hinf; Filtering for networked systems with intermittent measurements of multiple sensors,” International Journal of Adaptive Control and Signal Processing, vol. 25, no. 4, pp. 313–330, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Tindell, A. Burns, and A. J. Wellings, “Analysis of hard real-time communications,” Real-Time Systems, vol. 9, no. 2, pp. 147–171, 1995. View at Publisher · View at Google Scholar · View at Scopus
  7. J. M. Jeon, D. W. Kim, H. S. Kim, Y. J. Cho, and B. H. Lee, “An analysis of network-based control system using CAN(controller area network) protocol,” in Proceedings of the IEEE International Conference on Robotics & Automation, pp. 3577–3581, Seoul, Korea, May 2001. View at Scopus
  8. Z.-J. Wu, M.-Q. Hu, J.-Y. Zheng, and Y.-S. Du, “Study on the delay of CAN bus at the process level of substation,” Automation of Electric Power Systems, vol. 29, no. 11, pp. 34–39, 2005. View at Google Scholar · View at Scopus
  9. L. Yabo, Z. Junzhi, and L. Qingchun, “An analysis on real-time capability of CAN networks for hybrid electric vehicle,” Automotive Engineering, vol. 27, no. 1, pp. 16–19, 2005. View at Google Scholar
  10. J.-B. Wang and B.-G. Xu, “Analysis and online evaluation of CAN message real-time performance,” Control and Decision, vol. 22, no. 4, pp. 448–452, 2007. View at Google Scholar · View at Scopus
  11. S. Hasnaoui, O. Kallel, R. Kbaier, and S. B. Ahmed, “An implementation of a proposed modification of CAN protocol on CAN fieldbus controller component for supporting a dynamic priority policy,” in Proceedings of the 38th IAS Annual Meeting. Conference Record of the Industry Applications Conference, pp. 23–31, October 2003. View at Scopus
  12. J. Li, Y. Zhu, and G. Tian, “Response time analysis for CAN and TTCAN communications,” Journal of Tsinghua University, vol. 46, no. 2, pp. 261–265, 2006. View at Google Scholar · View at Scopus
  13. D. Heffernan and A. Bohannon, “Real-time design in a distributed control network application layer environment,” IEE Proceedings, vol. 148, no. 5, pp. 149–155, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Xufan and Y. Jun, “Queuing network based model for bus buffer estimation,” Journal of Applied Sciences, vol. 24, no. 1, pp. 45–49, 2006. View at Google Scholar
  15. S. Jiugen, Real-time study of NCS [Ph.D. thesis], University of Science and Technology of China, Hefei, China, 2003.
  16. S. Jiugen and Z. Peiren, “The study of CAN networks application in real-time system,” Journal of University of Science and Technology of China, vol. 35, no. 2, pp. 196–201, 2005. View at Google Scholar
  17. W. Huan and W. Lifang, “A research on the real-time analysis,” High Technology Letters, vol. 16, no. 8, pp. 830–883, 2006. View at Google Scholar
  18. W. Huan, The study of TTCAN bus tech in electric vehicle [Ph.D. thesis], Chinese Academy of Sciences, Beijing, China, 2006.
  19. C. M. Krishna and K. G. Shin, Real-Time Systems, Tsinghua University Press, Beijing, China, 2001.
  20. C. M. Krishna and K. G. Shin, Real-Time Systems, Dai Qionghai Transactions, Tsinghua University Press, Beijing, China, 2004.
  21. F. Bimbard and L. George, “On the conception of an autonomous and modular robot based on an Event Driven OSEK System with deterministic real-time behavior,” in Proceedings of the International Conference on Autonomic and Autonomous Systems, July 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. F. Bimbard and L. George, “FP/FIFO feasibility conditions with kernel overheads for periodic tasks on an event driven OSEK system,” in Proceedings of the 9th IEEE International Symposium on Object-Oriented Real-Time Distributed Computing (ISORC '06), pp. 566–574, April 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Jianfeng, Z. Wenhua, H. Wenhua, and S. Qianjun, “Development of automotive ECU using RTOS in compliance with OSEK/VDX standard,” Automotive Engineering, vol. 26, no. 2, pp. 210–213, 2004. View at Google Scholar
  24. C.-W. Liu, S.-Y. Wang, and Q. Yang, “Study of high pressure common rail fuel injection system based on OSEKWorks platform,” Chinese Internal Combustion Engine Engineering, vol. 25, no. 4, pp. 28–31, 2004. View at Google Scholar · View at Scopus
  25. W. Cao, T. Zhang, Y. Liu, and Y. Wang, “Design and analysis on scheduling of messages in automotive control system based on TTCAN,” Transactions of the Chinese Society of Agricultural Machinery, vol. 38, no. 12, pp. 41–44, 2007. View at Google Scholar · View at Scopus