Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2013, Article ID 913458, 14 pages
http://dx.doi.org/10.1155/2013/913458
Research Article

Effective and Robust Generalized Predictive Speed Control of Induction Motor

1Department of Automatic Control and Systems Engineering, EUITI de Eibar, University of the Basque Country (UPV/EHU), Otaola Hiribidea 29, 20600 Eibar, Spain
2Department of Automatic Control and Systems Engineering, EUI de Vitoria-Gasteiz, University of the Basque Country (UPV/EHU), Nieves Cano 12, 01006 Vitoria-Gasteiz, Spain
3Department of Automatic Control and Systems Engineering, ETSI de Bilbao, University of the Basque Country (UPV/EHU), Alameda Urquijo s/n, 48013 Bilbao, Spain
4Department of Electronics Technology, EUITI de Eibar, University of The Basque Country (UPV/EHU), Otaola Hiribidea 29, 20600 Eibar, Spain

Received 20 June 2013; Revised 30 September 2013; Accepted 16 October 2013

Academic Editor: Bo-Chao Zheng

Copyright © 2013 Patxi Alkorta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. F. Camacho and C. Bordons, Model Predictive Control, Springer, London, UK, 2nd edition, 2007.
  2. Y. Xia, G.-P. Liu, M. Fu, and D. Rees, “Predictive control of networked systems with random delay and data dropout,” Control Theory and Applications, vol. 3, no. 11, pp. 1476–1486, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. D. W. Clarke, C. Mohtadi, and P. S. Tuffs, “Generalized predictive control—part I. The basic algorithm,” Automatica, vol. 23, no. 2, pp. 137–148, 1987. View at Google Scholar · View at Scopus
  4. D. W. Clarke, C. Mohtadi, and P. S. Tuffs, “Generalized predictive control—part II. Extensions and interpretations,” Automatica, vol. 23, no. 2, pp. 149–160, 1987. View at Google Scholar · View at Scopus
  5. J. Yu, J. Gao, Y. Ma, and H. Yu, “Adaptive fuzzy tracking control for a permanent magnet synchronous motor via backstepping approach,” Mathematical Problems in Engineering, vol. 2010, Article ID 391846, 13 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. C.-F. Huang, J.-S. Lin, T.-L. Liao, C.-Y. Chen, and J.-J. Yan, “Quasi-sliding mode control of chaos in permanent magnet synchronous motor,” Mathematical Problems in Engineering, vol. 2011, Article ID 964240, 10 pages, 2011. View at Publisher · View at Google Scholar · View at MathSciNet
  7. O. Barambones and P. Alkorta, “A robust vector control for induction motor drives with an adaptive sliding-mode control law,” Journal of the Franklin Institute, vol. 348, no. 2, pp. 300–314, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Zeng, “Adaptive speed control design for brushed permanent magnet DC motor based on worst-case analysis approach,” Mathematical Problems in Engineering, vol. 2013, Article ID 698050, 15 pages, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  9. R. Kennel, A. Linder, and M. Linke, “Generalized Predictive Control (GPC)-ready for use in drive applications?” in Proceedings of the IEEE 32nd Annual Power Electronics Specialists Conference, pp. 1839–1844, Vancouver, Canada, June 2001. View at Scopus
  10. R. Hedjar, R. Toumi, P. Boucher, and D. Dumur, “Cascaded nonlinear predictive control of induction motor,” European Journal of Control, vol. 10, no. 1, pp. 65–80, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. K. Barra and K. Benmahammed, “New extended cascaded predictive control with multiple reference models ECGPC/MRM of an induction motor drive with efficiency optimization,” Journal of Electrical Engineering, vol. 58, no. 2, pp. 71–78, 2007. View at Google Scholar · View at Scopus
  12. M. Tonnes and H. Rasmussen, “Robust self-tuning control of AC-servo drive,” in Proceedings of the European Conference on Power Electronics and Application, pp. 3049–3053, November 1991.
  13. P. Boucher, D. Dumur, and A. Ehrlinger, “Unified approach of equality and inequality constraints in G.P.C,” in Proceedings of the IEEE International Conference on Control Applications, pp. 894–899, Dearborn, Mich, USA, September 1996. View at Scopus
  14. M. A. Gama and M. Mahfouf, “Speed control of an experimental hot-rolling mill using generalized predictive control,” in Proceedings of the International Control Conference (CCA '06), pp. 1–6, September 2006.
  15. P. Alkorta, O. Barambones, A. J. Garrido, and I. Garrido, “SVPWM linear Generalized Predictive Control of induction motor drives,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE '08), pp. 588–593, Cambridge, UK, July 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Rodríguez and D. Dumur, “Generalized predictive control robustification under frequency and time-domain constraints,” IEEE Transactions on Control Systems Technology, vol. 13, no. 4, pp. 577–587, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. E. S. de Santana, E. Bim, and W. C. do Amaral, “A predictive algorithm for controlling speed and rotor flux of induction motor,” IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4398–4407, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. P. Cortés, L. Vattuone, and J. Rodríguez, “Predictive current control with reduction of switching frequency for three phase voltage source inverters,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE '11), pp. 1817–1822, Gdansk, Poland, June 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Guzinski and H. Abu-Rub, “Speed sensorless induction motor drive with predictive current controller,” IEEE Transactions on Industrial Electronics, vol. 60, no. 2, pp. 699–709, 2013. View at Google Scholar
  20. E. F. Camacho, “Constrained generalized predictive control,” IEEE Transactions on Automatic Control, vol. 38, no. 2, pp. 327–332, 1993. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  21. C.-W. Park and W.-H. Kwon, “Time-delay compensation for induction motor vector control system,” Electric Power Systems Research, vol. 68, no. 3, pp. 238–247, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Ogata, Modern Control Engineering, Prentice Hall, Upper Saddle River, NJ, USA, 3rd edition, 1997.
  23. N. Mohan, Advanced Electric Drives, University of Minnesota, Mineapolis, Minn, USA, 1st edition, 2001.
  24. B. K. Bose, Modern Power Electronics and AC Drives, Prentice Hall, Upper Saddle River, NJ, USA, 2002.
  25. K. J. Åström and B. Wittenmark, Computer Controller Systems: Theory and Designs, Prentice Hall, Upper Saddle River, NJ, USA, 3rd edition, 1997.