Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 127128, 11 pages
http://dx.doi.org/10.1155/2014/127128
Research Article

Performance Analysis of DTC-SVM Sliding Mode Controllers-Based Parameters Estimator of Electric Motor Speed Drive

Control & Energy Management Laboratory (CEMLab), Sfax Engineering School, University of Sfax, BP 1173, 3038 Sfax, Tunisia

Received 10 June 2014; Revised 14 August 2014; Accepted 19 August 2014; Published 11 September 2014

Academic Editor: Rongni Yang

Copyright © 2014 Fatma Ben Salem and Nabil Derbel. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. Takahashi and T. Noguchi, “A new quick-response and high-efficiency control strategy of an induction motor,” IEEE Transactions on Industry Applications, vol. IA-22, no. 5, pp. 820–827, 1986. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Depenbrock, U. Baader, and G. Gierse, “Direct Self-Control (DSC) of inverter-fed induction machine: a basis for speed control without speed measurement,” IEEE Transactions on Power Electronics, vol. 3, no. 4, pp. 420–429, 1988. View at Google Scholar
  3. F. Ben Salem, A. Yangui, and A. Masmoudi, “On the reduction of the commutation frequency in DTC: a comparative study,” European Transactions on Electrical Power Engineering, vol. 15, no. 6, pp. 571–584, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Brandstetter, P. Chlebis, and P. Palacky, “Direct torque control of induction motor with direct calculation of voltage vector,” Advances in Electrical and Computer Engineering, vol. 10, no. 4, pp. 17–22, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Chaikhy, M. Khafallah, and A. Saad, “Evaluation of two control strategies for induction machine,” International Journal of Computer Applications, vol. 35, no. 5, pp. 571–584, 2011. View at Google Scholar
  6. R. Sadouni and A. Meroufel, “Performances comparative study of field oriented control (FOC) and direct torque control (DTC) of dual three phase induction motor (DTPIM),” International Journal of Circuits, Systems and Signal Processing, vol. 6, no. 2, pp. 163–170, 2012. View at Google Scholar · View at Scopus
  7. S. Allirani and V. Jagannathan, “Direct torque control technique in induction motor drives-a review,” Journal of Theoretical and Applied Information Technology, vol. 60, no. 3, pp. 454–475, 2014. View at Google Scholar
  8. N. R. N. Idris and A. H. M. Yatim, “Reduced torque ripple and constant torque switching frequency strategy for direct torque control of induction machine,” in Proceedings of the 15th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '00), pp. 154–161, New Orleans, La, USA, February 2000. View at Scopus
  9. W. Srirattanawichaikul, Y. Kumsuwan, and S. Premrudeepreechacharn, “Reduction of torque ripple in direct torque control for induction motor drives using decoupled amplitude and angle of stator flux control,” ECTI Transactions on Electrical Engineering, Electronics, and Communications, vol. 8, no. 2, pp. 187–196, 2010. View at Google Scholar
  10. K. K. Shyu, J. K. Lin, V. T. Pham, M. J. Yang, and T. W. Wang, “Global minimum torque ripple design for direct torque control of induction motor drives,” IEEE Transactions on Industrial Electronics, vol. 57, no. 9, pp. 3148–3156, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Ben Salem and A. Masmoudi, “A comprehensive analysis of the inverter switching frequency in Takahashi DTC strategy,” The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 26, no. 1, pp. 148–166, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Zaimeddine and E. M. Berkouk, “Enhanced direct torque control using a three-level voltage source inverter,” Asian Power Electronics Journal, vol. 1, no. 1, pp. 64–68, 2007. View at Google Scholar
  13. N. A. Azli, N. M. Nordin, and N. R. N. Idris, “Direct torque control of multilevel inverterfed induction machines—a survey,” Journal of Theoretical and Applied Information Technology, vol. 41, no. 2, pp. 181–191, 2012. View at Google Scholar · View at Scopus
  14. C. H. Krishna, J. Amarnath, and S. Kamakshiah, “A simplified SVPWM algorithm for multi-level inverter fed DTC of induction motor drive,” International Journal of Engineering and Innovative Technology, vol. 1, no. 4, pp. 61–67, 2012. View at Google Scholar
  15. T. G. Habetler, F. Profumo, M. Pastorelli, and L. M. Tolbert, “Direct torque control of induction machines using space vector modulation,” IEEE Transactions on Industry Applications, vol. 28, no. 5, pp. 1045–1053, 1992. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Y. Chen, “Sliding mode controller design of induction motor based on space-vector pulsewidth modulation method,” International Journal of Innovative Computing, Information and Control, vol. 5, no. 10, pp. 3603–3614, 2009. View at Google Scholar · View at Scopus
  17. A. Joseline Metilda, R. Arunadevi, N. Ramesh, and C. Sharmeela, “Analysis of direct torque control using space vector modulation for three phase induction motor,” Recent Research in Science and Technology, vol. 3, no. 7, pp. 37–40, 2011. View at Google Scholar
  18. H. F. Rashag, S. P. Koh, K. H. Chong, S. K. Tiong, N. M. L. Tan, and A. N. Abdalla, “High performance of space vector modulation direct torque control SVM-DTC based on amplitude voltage and stator flux angle,” Research Journal of Applied Sciences, Engineering and Technology, vol. 5, no. 15, pp. 3934–3940, 2013. View at Google Scholar · View at Scopus
  19. A. Ouarda and F. Ben Salem, “Induction machine DTC-SVM: A comparison between two approaches,” in Proceedings of the 10th International Multi-Conference on Systems, Signals and Devices (SSD '13), March 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Ahammad, S. A. Khan, and R. K. Reddy, “Novel DTC-SVM for an adjustable speed sensorless induction motor drive,” International Journal of Science Engineering and Advance Technology, vol. 2, no. 1, pp. 31–36, 2014. View at Google Scholar
  21. M. S. Carmeli and M. Mauri, “Direct torque control as variable structure control: existence conditions verification and analysis,” Electric Power Systems Research, vol. 81, no. 6, pp. 1188–1196, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Veera and T. B. Reddy, “Implementation of discrete space vector modulation based direct torque control of induction motor for reduced ripple: a sliding mode control approach,” International Journal of Advanced Scientific and Technical Research, vol. 4, pp. 22–38, 2012. View at Google Scholar
  23. F. Ben Salem and N. Derbel, “Direct torque control of induction motors based on discrete space vector modulation using adaptive sliding mode control,” International Journal of Electric Power Components and Systems, vol. 42, no. 13–16, 2014. View at Google Scholar
  24. F. B. Salem and N. Derbel, “A sliding mode field oriented control of an induction machine operating with variable parameters,” International Journal of Power and Energy Systems, vol. 27, no. 2, pp. 205–212, 2007. View at Google Scholar · View at Scopus
  25. K. Venkateswarlu, G. Sandeep, N. Srinivas, and K. Damodara Reddy, “Speed sensorless sliding mode control of induction motor using simulink,” IOSR Journal of Electrical and Electronics Engineering, vol. 6, no. 2, pp. 50–56, 2013. View at Google Scholar
  26. Y. Chang and C. Wen, “Sliding mode control for the synchronous generator,” ISRN Applied Mathematics, vol. 2014, Article ID 256504, 7 pages, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  27. S. Mir, M. E. Elbuluk, and D. S. Zinger, “PI and fuzzy estimators for tuning the stator resistance in direct torque control of induction machines,” IEEE Transactions on Power Electronics, vol. 13, no. 2, pp. 279–287, 1998. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Zidani and D. Diallo, “Direct torque control of induction motor with fuzzy stator resistance adaptation,” IEEE Transactions on Energy Conversion, vol. 21, no. 2, pp. 619–621, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. B. M. Chandra and S. T. Kalyani, “FPGA controlled stator resistance estimation in IVC of IM using FLC,” Global Journal of Researches in Engineering Electrical and Electronics Engineering, vol. 13, no. 13, 2013. View at Google Scholar
  30. L. Wu, X. Su, and P. Shi, “Output feedback control of Markovian jump repeated scalar nonlinear systems,” IEEE Transactions on Automatic Control, vol. 59, no. 1, pp. 199–204, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  31. F. Li, P. Shi, L. Wu, and X. Zhang, “Fuzzy-model-based D-stability and non-fragile control for discrete-time descriptor systems with multiple delays,” IEEE Transactions on Fuzzy Systems, vol. 22, no. 4, pp. 1019–1025, 2013. View at Google Scholar
  32. F. Li, L. Wu, and P. Shi, “Stochastic stability of semi-Markovian jump systems with mode-dependent delays,” International Journal of Robust and Nonlinear Control, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. F. Li and X. Zhang, “A delay-dependent bounded real lemma for singular LPV systems with time-variant delay,” International Journal of Robust and Nonlinear Control, vol. 22, no. 5, pp. 559–574, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  34. H. F. Rashag, N. M. L. Tan, S. P. Koh, A. N. Abdalla, K. H. Chong, and S. K. Tiong, “DTC-SVM based on PI torque and PI flux controllers to achieve high performance of induction motor,” Research Journal of Applied Sciences, Engineering and Technology, vol. 7, no. 4, pp. 875–891, 2014. View at Google Scholar
  35. F. Ben Salem and N. Derbel, “VSC-based DTC-SVM with adaptive parameter estimation,” in Proceedings of the 11th International Multi-Conference on Systems, Signals & Devices (SSD '14), pp. 1–7, Barcelona, Spain, February 2014. View at Publisher · View at Google Scholar
  36. Z. Yan, C. Jin, and V. I. Utkin, “Sensorless sliding-mode control of induction motors,” IEEE Transactions on Industrial Electronics, vol. 47, no. 6, pp. 1286–1297, 2000. View at Publisher · View at Google Scholar · View at Scopus
  37. K. D. Young, V. I. Utkin, and Ü. Özgüner, “A control engineer's guide to sliding mode control,” IEEE Transactions on Control Systems Technology, vol. 7, no. 3, pp. 328–342, 1999. View at Publisher · View at Google Scholar · View at Scopus
  38. A. G. Loukianov, “Robust block decomposition sliding mode control design,” Mathematical Problems in Engineering, vol. 8, no. 4-5, pp. 349–365, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  39. V. I. Utkin, “Sliding mode control design principles and applications to electric drives,” IEEE Transactions on Industrial Electronics, vol. 40, no. 1, pp. 23–36, 1993. View at Publisher · View at Google Scholar · View at Scopus
  40. A. Jidin, N. R. N. Idris, and A. H. M. Yatim, “Study on stability and performances of DTC due to stator resistance variation,” in Proceedings of the 5th Student Conference on Research and Development (SCORED '07), pp. 1–6, Selangor, Malaysia, December 2007. View at Publisher · View at Google Scholar · View at Scopus
  41. “IEEE Standard Test Procedure for Polyphase Induction Motors and Generators,” IEEE Std 112-1991, IEEE, 1991. View at Publisher · View at Google Scholar