Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 162561, 18 pages
http://dx.doi.org/10.1155/2014/162561
Research Article

A Novel Integral 5-DOFs Hybrid Magnetic Bearing with One Permanent Magnet Ring Used for Turboexpander

1School of Instrument Science and Opto-Electronics Engineering, Beihang University, Beijing 100191, China
2Key Laboratory of Fundamental Science for National Defense of Novel Inertial Instrument and Navigation System Technology, Beijing 100191, China
3Science and Technology on Inertial Laboratory, Beijing 100191, China

Received 9 September 2013; Revised 20 January 2014; Accepted 6 February 2014; Published 7 May 2014

Academic Editor: Hector Puebla

Copyright © 2014 Bangcheng Han et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. http://www.magnetic-bearings-s2m.com.
  2. http://www.ge-energy.com/about/oil_and_gas.jsp.
  3. http://www.skf.com/au/products/magnetic-systems/magnetic-systems-applications/oil-gas/turboexpanders/index.html.
  4. J. Jumonville, “Tutorial on cryogenic turboexpanders,” in Proceedings of the 33rd Turbomachinery Symposium, pp. 127–134, George R. Brown Convention Center, Houston, Tex, USA, September 2004.
  5. J. Jumonville, C. M. Ramsey, and F. Andrews, “Specifying, manufacturing, and testing a cryogenic turboexpander magnetic bearing system,” in Proceedings of the 20th Turbomachinery Symposium, pp. 3–9, Turbomachinery Laboratory, Texas A&M University, College Station, Tex, USA, 1991.
  6. H. Hirai, M. Hirokawa, S. Yoshida et al., “Development of a neon cryogenic turbo-expander with magnetic bearings,” in Proceedings of the Transactions of the Cryogenic Engineering Conference-CEC: Advances in Cryogenic Engineering, vol. 1218 of AIP Proceedings, pp. 895–902, Tucson, Ariz, USA, 2010. View at Publisher · View at Google Scholar
  7. W. Xiping, Z. Zhiming, Y. Liang, C. Weidong, and W. Jingui, “Experimental study of active magnetic bearing on a 150 M3 turbo oxygen gas expander,” Journal of Shanghai University, vol. 2, no. 4, pp. 334–336, 1998. View at Publisher · View at Google Scholar
  8. W. Xiping, Z. Zhimin, Y. Liang, and W. Jingui, “Development of applied research of active magnetic bearing on a gas expander,” China Mechanical Engineering, vol. 11, no. 4, pp. 379–381, 2000 (Chinese). View at Google Scholar
  9. M. Brune and I. Detomb, “Application of active magnetic bearings in turbocompressors and turboexpanders of the gas industry,” Chemical and Petroleum Engineering, vol. 38, no. 7-8, pp. 459–463, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. W. R. Canders, N. Ueffing, U. Schrader-Hausm, and R. Larsonneur, “MTG400: a magnetically levitated 400 kW turbo generator system for natural gas expansion,” in Proceedings of the 4th International Symposium on Magnetic Bearings, G. Schweitzer, Ed., pp. 435–440, ETH Zürich, Zürich, Switzerland, 1994.
  11. J. Schmied, “Rotordynamic aspects of a new hermetically sealed pipeline compressor,” in Proceedings of the 20th Trubomachinery Symposium, pp. 11–17, Turbomachinery Laboratory, Texas A&M University, College Station, Tex, USA, 1991.
  12. T. M. Brian, O. Hamid, T. C. Matthew, and J. D. Herbst, “Permanent magnet bias, homopolar magnetic bearings for a 130 kW-hr composite flywheel,” in Proceedings of the 19th International Symposium on Magnetic Bearings, pp. 66–72, Lexingtong, Ky, USA, 2004.
  13. Y. Zhilichev, “Analysis of a magnetic bearing pair with a permanent magnet excitation,” IEEE Transactions on Magnetics, vol. 36, no. 5, pp. 3690–3692, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. C. Ehmann, T. Sielaff, and R. Nordmann, “Parison of active magnetic bearings with and without permanent magnet bias,” in Proceedings of the 19th International Symposium on Magnetic Bearings, Lexington, Ky, USA, August 2004.
  15. B. Han, S. Zheng, and H. Xiaofei, “Dynamic factor models of a thrust magnetic bearing with permanent magnet bias and subsidiary air gap,” IEEE Transactions on Magnetics, vol. 49, no. 3, pp. 1221–1230, 2013. View at Publisher · View at Google Scholar
  16. J. Fang and Y. Ren, “High-precision control for a single-gimbal magnetically suspended control moment gyro based on inverse system method,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 4331–4342, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. C. H. Park, S. K. Choi, and S. Y. Ham, “Design and control for hybrid magnetic thrust bearing for turbo refrigerant compressor,” in Proceedings of the 7th IEEE International Conference on Automation Science and Engineering (CASE '11), pp. 792–797, Trieste, Italy, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. K.-C. Lee, Y.-H. Jeong, D.-H. Koo, and H. J. Ahn, “Development of a radial active magnetic bearing for high speed turbo-machinery motors,” in Proceedings of the SICE-ICASE International Joint Conference, pp. 1543–1548, Busan, South Korea, October 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Watkins, G. Brown, and K. Blumenstock, “Control of integrated radial and axial magnetic bearings,” in Proceedings of the 33rd Southeastern Symposium on System Theory, pp. 1–5, Athens, Ohio, USA, March 2001.
  20. K. A. Blumenstock and G. L. Brown, “Novel integrated radial and axial magnetic bearing,” in Proceedings of the 7th International Symposium on Magnetic Bearings, pp. 467–472, Zürich, Switzerland, August 2000.
  21. P. Imoberdorf, C. Zwyssig, S. D. Round, and J. W. Kolar, “Combined radial-axial magnetic bearing for a 1 kW, 500,000 rpm permanent magnet machine,” in Proceedings of the 22nd Annual IEEE Applied Power Electronics Conference and Exposition (APEC '07), pp. 1434–1440, Anaheim, Calif, USA, March 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. P. Imoberdorf, T. Nussbaumer, and J. W. Kolar, “Analysis of a combined radial-axial magnetic bearing for a high-speed drive system,” in Proceedings of the 5th IET International Conference on Power Electronics, Machines and Drives (PEMD '10), pp. 1–6, Brighton, UK, April 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. Z. Xie, H. Zhu, and Y. Sun, “Structure and control of AC-DC three-degree-of-freedom hybrid magnetic bearing,” in Proceeding of 11th International Conference on Electrical Machines and Systems (ICEMS '05), vol. 3, pp. 1801–1806, Wuhan, China, 2008. View at Publisher · View at Google Scholar
  24. P. T. McMullen, C. S. Huynh, and R. J. Hayes, “Combination radial-axial magnetic bearing,” in Proceedings of the 7th International Symposium on Magnetic Bearings, pp. 473–478, Zürich, Switzerland, August 2000.
  25. W. Ni, Q. Wu, D. Jin, X. He, and T. Zhang, “Study on measuring and control system of AC radial-axial hybrid magnetic bearing used in wind energy generation system,” in Proceedings of the 31st Chinese Control Conference (CCC '12), pp. 6847–6850, Hefei, China, July 2012.
  26. U. J. Na, “Design and analysis of a new permanent magnet biased integrated radial-axial magnetic bearing,” International Journal of Precision Engineering and Manufacturing, vol. 13, no. 1, pp. 133–136, 2012. View at Publisher · View at Google Scholar
  27. L. Huang, G. Zhao, H. Nian, and Y. He, “Modeling and design of permanent magnet biased radial-axial magnetic bearing by extended circuit theory,” in Proceedings of the International Conference on Electrical Machines and Systems (ICEMS '07), pp. 1502–1507, Seoul, South Korea, October 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. W. Zhang, Y. Ruan, X. Diao, and H. Zhu, “Control system design for AC-DC three-degree-of-freedom hybrid magnetic bearing,” Applied Mechanics and Materials, vol. 150, pp. 144–147, 2012. View at Publisher · View at Google Scholar · View at Scopus