Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 273906, 12 pages
http://dx.doi.org/10.1155/2014/273906
Research Article

Quality-Oriented Classification of Aircraft Material Based on SVM

Shanghai Key Laboratory of Intelligent Manufacturing and Robotics, School of Mechatronic Engineering and Automation, Shanghai University, Mailbox 232, No. 149 Yanchang Road, Shanghai 200072, China

Received 17 June 2014; Revised 13 September 2014; Accepted 14 September 2014; Published 9 November 2014

Academic Editor: Yan-Wu Wang

Copyright © 2014 Hongxia Cai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. D'Orazio, C. Guaragnella, M. Leo, and P. Spagnolo, “Defect detection in aircraft composites by using a neural approach in the analysis of thermographic images,” NDT and E International, vol. 38, no. 8, pp. 665–673, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. H. F. Dickie, “ABC inventory analysis shoots for dollars not pennies,” Factory Management and Maintenance, vol. 109, pp. 92–94, 1951. View at Google Scholar
  3. Z. Zhao, K. Ji, X. Xing, W. Chen, and H. Zou, “Ship classification with high resolution terrasar-x imagery based on analytic hierarchy process,” International Journal of Antennas and Propagation, vol. 2013, Article ID 698370, 13 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. T. L. Saaty, What is the Analytic Hierarchy Process?Springer, Berlin, Germany, 1988.
  5. J. Moran, S. Marsh, S. Nakui, and G. Hoffherr, “Design concept evaluation in product development using rough sets and grey relation analysis,” Journal of Mechanical Design, vol. 124, no. 3, pp. 385–392, 1991. View at Google Scholar
  6. W. Pedrycz and M. Song, “Analytic Hierarchy process (AHP) in group decision making and its optimization with an allocation of information granularity,” IEEE Transactions on Fuzzy Systems, vol. 19, no. 3, pp. 527–539, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. C. K. Kwong and H. Bai, “A fuzzy AHP approach to the determination of importance weights of customer requirements in quality function deployment,” Journal of Intelligent Manufacturing, vol. 13, no. 5, pp. 367–377, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. D. M. Lee and P. R. Drake, “A portfolio model for component purchasing strategy and the case study of two South Korean elevator manufacturers,” International Journal of Production Research, vol. 48, no. 22, pp. 6651–6682, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Terpend, D. R. Krause, and K. J. Dooley, “Managing buyer-supplier relationships: empirical patterns of strategy formulation in industrial purchasing,” Journal of Supply Chain Management, vol. 47, no. 1, pp. 73–94, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. H. A. Guvenir and E. Erel, “Multicriteria inventory classification using a genetic algorithm,” European Journal of Operational Research, vol. 105, no. 1, pp. 29–37, 1998. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Y. Partovi and M. Anandarajan, “Classifying inventory using an artificial neural network approach,” Computers and Industrial Engineering, vol. 41, no. 4, pp. 389–404, 2001. View at Google Scholar · View at Scopus
  12. W. E. Henley and D. J. Hand, “A k-nearest-neighbour classifier for assessing consumer credit risk,” The Statistician, vol. 45, no. 1, pp. 77–95, 1996. View at Google Scholar · View at Scopus
  13. C.-Y. Tsai and S.-W. Yeh, “A multiple objective particle swarm optimization approach for inventory classification,” International Journal of Production Economics, vol. 114, no. 2, pp. 656–666, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Yin, S. Yang, X. Zhu, S. Jin, and X. Wang, “Satellite fault diagnosis using support vector machines based on a hybrid voting mechanism,” The Scientific World Journal, vol. 2014, Article ID 582042, 11 pages, 2014. View at Publisher · View at Google Scholar
  15. C. Fernandez-Lozano, C. Canto, M. Gestal et al., “Hybrid model based on genetic algorithms and SVM applied to variable selection within fruit juice classification,” The Scientific World Journal, vol. 2013, Article ID 982438, 13 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Gao, B.-S. Tong, and X.-H. Dong, “Research on component and supplier management in collaborative design,” Computer Integrated Manufacturing Systems, vol. 8, no. 10, pp. 766–769, 2002. View at Google Scholar · View at Scopus
  17. S. B. Kotsiantis, “Supervised machine learning: a review of classification techniques,” Informatica, vol. 31, no. 3, pp. 249–268, 2007. View at Google Scholar · View at MathSciNet · View at Scopus
  18. T. Hastie, R. Tibshirani, and J. Friedman, The Elements of Statistical Learning, vol. 2, Springer, New York, NY, USA, 2009.
  19. Z. Zuo, Y. Hu, Q. Li, and L. Zhang, “Data mining of the thermal performance of cool-pipes in massive concrete via in situ monitoring,” Mathematical Problems in Engineering, vol. 2014, Article ID 985659, 15 pages, 2014. View at Publisher · View at Google Scholar
  20. G. Zhu and D. G. Blumberg, “Classification using ASTER data and SVM algorithms: the case study of Beer Sheva, Israel,” Remote Sensing of Environment, vol. 80, no. 2, pp. 233–240, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. R. Venegas, “Academic text classification based on lexical-semantic content,” 2014.
  22. L. P. Hernández, J. M. Flórez, and J. B. Cebayos, “A linear approach to determining an SVM-based fault locator's optimal parameters,” Ingenieria e Investigacion, vol. 29, no. 1, pp. 76–81, 2009. View at Google Scholar · View at Scopus
  23. J. W.-H. Kao, S. M. Berber, and V. Kecman, “Blind multiuser detector for chaos-based CDMA using support vector machine,” IEEE Transactions on Neural Networks, vol. 21, no. 8, pp. 1221–1231, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. X. Yu, F. Chu, and R. Hao, “Fault diagnosis approach for rolling bearing based on support vector machine and soft morphological filters,” Journal of Mechanical Engineering, vol. 45, no. 7, pp. 75–80, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Wei, “Real-time vehicle classification with GA, PCA and improved SVM,” Journal of Eastern Liaoning University (Natural Science), vol. 17, no. 4, pp. 296–302, 2012. View at Google Scholar
  26. X.-X. Ma, X.-Y. Huang, and Y. Chai, “PTMC classification algorithm based on support vector machines and its application to fault diagnosis,” Control and Decision, vol. 18, no. 3, pp. 272–284, 2003. View at Google Scholar · View at Scopus
  27. Z. Yixin, Design and Implementation of the Integrated Material Management System for ARJ21, Fudan University, Shanghai, China, 2011.
  28. A. A. Ghobbar and C. H. Friend, “Evaluation of forecasting methods for intermittent parts demand in the field of aviation: a predictive model,” Computers and Operations Research, vol. 30, no. 14, pp. 2097–2114, 2003. View at Publisher · View at Google Scholar · View at Scopus
  29. C. H. Friend, A. Louise Swift, and A. A. Ghobbar, “A predictive cost model in lot-sizing methodology, with specific reference to aircraft parts inventory: an appraisal,” Production and Inventory Management Journal, vol. 42, no. 3-4, pp. 24–33, 2001. View at Google Scholar · View at Scopus
  30. Y. Xu, Research on Key Techniques of Spares Data Management Based on PDM, Nanjing University of Aeronautics and Astronautics, Nanjing, China, 2008.
  31. L. Sun and H. Zuo, “Multi-echelon inventory optimal model of civil aircraft spare parts,” in Proceedings of the Chinese Control and Decision Conference (CCDC '10), pp. 824–828, May 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. G. Ning, Research on Primary Inventory of Civil Aircraft Spare Parts for Manufacturer, Nanjing University of Aeronautics and Astronautics, Nanjing, China, 2008.
  33. H. X. Cai, M. Y. Dai, and T. Yu, “Material coding for aircraft manufacturing industry,” Journal of Aerospace Technology and Management, vol. 6, no. 2, pp. 183–191, 2014. View at Google Scholar
  34. W.-W. Wu, H.-X. Cai, L. Wang, F. Xiong, and T. Yu, “Research on inventory control based on material segmentation of civil aviation,” Informatization of Chinese Manufacturing Industry, vol. 39, no. 1, pp. 13–18, 2010. View at Google Scholar
  35. V. Mancini, M. Pasquali, and M. M. Schiraldi, “Opportunities for using RFID in the aircraft production process,” International Journal of RF Technologies: Research and Applications, vol. 3, no. 4, pp. 243–255, 2012. View at Publisher · View at Google Scholar · View at Scopus
  36. D. P. Davies, S. L. Jenkins, and F. R. Belben, “Survey of fatigue failures in helicopter components and some lessons learnt,” Engineering Failure Analysis, vol. 32, pp. 134–151, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. R. E. Shalin and I. A. Kantsevich, “Quality of aircraft materials as a guarantee of aircraft quality and reliability,” Elektrokhimiya, vol. 32, no. 62, pp. 75–76, 1996. View at Google Scholar
  38. R. W. Hillermeier, K. Chung, J. C. Seferis, and M. H. Diaz, “Reduced quality assurance testing of commercial aircraft prepreg systems,” in Proceedings of the 45th International SAMPE Symposium and Exhibition, May 2000. View at Scopus
  39. E. Kiliç Delice and Z. Güngör, “The usability analysis with heuristic evaluation and analytic hierarchy process,” International Journal of Industrial Ergonomics, vol. 39, no. 6, pp. 934–939, 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. S. S. Padhi, S. M. Wagner, and V. Aggarwal, “Positioning of commodities using the Kraljic Portfolio Matrix,” Journal of Purchasing and Supply Management, vol. 18, no. 1, pp. 1–8, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. V. N. Vapnik, The Nature of Statistical Learning Theory, Statistics for Engineering and Information Science, Springer, New York, NY, USA, 2nd edition, 2000. View at Publisher · View at Google Scholar · View at MathSciNet
  42. M. Wang, P. Wang, J.-S. Lin, X. Li, and X. Qin, “Nonlinear inertia classification model and application,” Mathematical Problems in Engineering, vol. 2014, Article ID 987686, 9 pages, 2014. View at Publisher · View at Google Scholar
  43. C. Zhang, X. Chen, M. Chen, S.-C. Chen, and M.-L. Shyu, “A multiple instance learning approach for content based image retrieval using one-class support vector machine,” in Proceedings of the IEEE International Conference on Multimedia and Expo (ICME '05), pp. 1142–1145, IEEE, July 2005. View at Publisher · View at Google Scholar · View at Scopus
  44. L. Zhang, F. Lin, and B. Zhang, “Support vector machine learning for image retrieval,” in Proceedings of the IEEE International Conference on Image Processing (ICIP '01), vol. 2, pp. 721–724, October 2001. View at Scopus
  45. L. Zheng, H. Zhou, C. Wang, and K. Cen, “Combining support vector regression and ant colony optimization to reduce NOx emissions in coal-fired utility boilers,” Energy and Fuels, vol. 22, no. 2, pp. 1034–1040, 2008. View at Publisher · View at Google Scholar · View at Scopus
  46. L. Zhuo, J. Zhang, P. Dong, Y. Zhao, and B. Peng, “An SA-GA-BP neural network-based color correction algorithm for TCM tongue images,” Neurocomputing, vol. 134, pp. 111–116, 2014. View at Publisher · View at Google Scholar · View at Scopus
  47. Y. Zhu, W. Zeng, Y. Sun, F. Feng, and Y. Zhou, “Artificial neural network approach to predict the flow stress in the isothermal compression of as-cast TC21 titanium alloy,” Computational Materials Science, vol. 50, no. 5, pp. 1785–1790, 2011. View at Publisher · View at Google Scholar · View at Scopus
  48. B. Caputo, E. Hayman, and P. Mallikarjuna, “Class-specific material categorisation,” in Proceedings 10th IEEE International Conference on Computer Vision (ICCV '05), vol. 2, pp. 1597–1604, IEEE, October 2005. View at Publisher · View at Google Scholar · View at Scopus