Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 287076, 11 pages
http://dx.doi.org/10.1155/2014/287076
Research Article

Loading and Contact Stress Analysis on the Thread Teeth in Tubing and Casing Premium Threaded Connection

1State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, School of Petroleum and Natural Gas Engineering, Southwest Petroleum University, Chengdu 610500, China
2R&D Center of Tianjin Pipe (Group) Corporation, Ltd., Tianjin 300301, China

Received 20 April 2014; Revised 15 August 2014; Accepted 21 August 2014; Published 13 October 2014

Academic Editor: Chunlin Chen

Copyright © 2014 Honglin Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Carcagno, “The design of tubing and casing premium connections for HTHP wells,” in Proceedings of the SPE High Pressure/High Temperature Sour Well Design Applied Technology Workshop, Society of Petroleum Engineers, 2005.
  2. A. Bradley, S. Nagasaku, and E. Verger, “Premium connection design testing and installation for HPHT sour wells,” in SPE High Pressure/High Temperature Sour Well Design Applied Technology Workshop, Society of Petroleum Engineers, 2005.
  3. M. Sugino, K. Nakamura, S. Yamaguchi, D. Daly, G. Briquet, and E. Verger, “Development of an innovative high-performance premium threaded connection for OCTG,” in Proceedings of the Offshore Technology Conference (OTC '10), pp. 1883–1891, May 2010. View at Scopus
  4. L. Maduschka, “Beanspruchung von Schraubenverbindungen und zweckmäßige Gestaltung der Gewindeträger,” Forschung auf dem Gebiete des Ingenieurwesens A, vol. 7, no. 6, pp. 299–305, 1936. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Sopwith, “The distribution of load in screw threads,” Proceedings of the Institution of Mechanical Engineers, vol. 159, no. 1, pp. 373–383, 1948. View at Google Scholar
  6. S. Yazawa and K. Hongo, “Distribution of load in the screw thread of a bolt-nut connection subjected to tangential forces and bending moments,” JSME International Journal I, Solid Mechanics, Strength of Materials, vol. 31, no. 2, pp. 174–180, 1988. View at Google Scholar
  7. W. Wang and K. M. Marshek, “Determination of the load distribution in a threaded connector having dissimilar materials and varying thread stiffness,” Journal of Engineering for Industry, vol. 117, no. 1, pp. 1–8, 1995. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Bruschelli and V. Latorrata, “The influence of “shell behavior” on load distribution for thin-walled conical joints,” Journal of Applied Mechanics, vol. 67, no. 2, pp. 298–306, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. S.-J. Chen, Q. An, Y. Zhang, L.-X. Gao, and Q. Li, “Loading analysis on the thread teeth in cylindrical pipe thread connection,” Journal of Pressure Vessel Technology, vol. 132, no. 3, pp. 0312021–0312028, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. P. O'Hara, “Finite element analysis of threaded connections,” in Proceedings of the Army Symposium on Solid Mechanics, DTIC Document, pp. 99–119, 1974.
  11. J. L. Bretl and R. D. Cook, “Modelling the load transfer in threaded connections by the finite element method,” International Journal for Numerical Methods in Engineering, vol. 14, no. 9, pp. 1359–1377, 1979. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Zhao, “A numerical method for load distribution in threaded connections,” Journal of Mechanical Design, vol. 118, no. 2, pp. 274–279, 1996. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Zhao, “Stress concentration factors within bolt-nut connectors under elasto-plastic deformation,” International Journal of Fatigue, vol. 20, no. 9, pp. 651–659, 1998. View at Publisher · View at Google Scholar · View at Scopus
  14. K. A. Macdonald and W. F. Deans, “Stress analysis of drillstring threaded connections using the finite element method,” Engineering Failure Analysis, vol. 2, no. 1, pp. 1–30, 1995. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Bahai, G. Glinka, and I. I. Esat, “Numerical and experimental evaluation of SIF for threaded connectors,” Engineering Fracture Mechanics, vol. 54, no. 6, pp. 835–845, 1996. View at Publisher · View at Google Scholar · View at Scopus
  16. J.-J. Chen and Y.-S. Shih, “Study of the helical effect on the thread connection by three dimensional finite element analysis,” Nuclear Engineering and Design, vol. 191, no. 2, pp. 109–116, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Baragetti, “Effects of taper variation on conical threaded connections load distribution,” Journal of Mechanical Design, vol. 124, no. 2, pp. 320–329, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. T. Fukuoka and M. Nomura, “Proposition of helical thread modeling with accurate geometry and finite element analysis,” Journal of Pressure Vessel Technology, vol. 130, no. 1, Article ID 011204, pp. 1–6, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Stoeckly and H. Macke, “Effect of taper on screw thread load distribution,” Transactions of the ASME, vol. 74, no. 1, pp. 103–112, 1952. View at Google Scholar
  20. G. Yuan, Z. Yao, J. Han, and Q. Wang, “Stress distribution of oil tubing thread connection during make and break process,” Engineering Failure Analysis, vol. 11, no. 4, pp. 537–545, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. J. C. R. Plácido, P. E. Valadã de Miranda, T. A. Netto, I. P. Pasqualino, G. F. Miscow, and B. de Carvalho Pinheiro, “Fatigue analysis of aluminum drill pipes,” Materials Research, vol. 8, no. 4, pp. 409–415, 2005. View at Google Scholar · View at Scopus
  22. M. Slack, H. Salkin, and F. Langer, “Technique to assess directly make-up contact stress inside tubular connections,” in SPE/IADC Drilling Conference, Society of Petroleum Engineers, 1990.
  23. K. A. Hamilton, B. Wagg, and T. Roth, “Using ultrasonic techniques to accurately examine seal surface contact stress in premium connections,” in Proceedings of the SPE Annual Technical Conference and Exhibition, pp. 3461–3471, Society of Petroleum Engineers, November 2007. View at Scopus
  24. A. Yamamoto, The Theory and Computation of Thread Connection, Youkendo, Tokyo, Japan, 1980, (Japanese).