Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 310626, 10 pages
http://dx.doi.org/10.1155/2014/310626
Research Article

A Diagnostic System for Speed-Varying Motor Rotary Faults

Department of Electrical Engineering, National Taipei University of Technology, Taipei 10608, Taiwan

Received 26 February 2014; Accepted 18 April 2014; Published 19 May 2014

Academic Editor: Her-Terng Yau

Copyright © 2014 Chwan-Lu Tseng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Nandi, H. A. Toliyat, and X. Li, “Condition monitoring and fault diagnosis of electrical motors—a review,” IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 719–729, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. S. A. Taher and M. Malekpour, “A novel technique for rotor bar failure detection in single-cage induction motor using FEM and MATLAB/SIMULINK,” Mathematical Problems in Engineering, vol. 2011, Article ID 620689, 14 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Chen, Y. Lu, and L. Tu, “Fault identification of gearbox degradation with optimized wavelet neural network,” Shock and Vibration, vol. 20, no. 2, pp. 247–262, 2013. View at Publisher · View at Google Scholar
  4. H. Liu, J. Wang, and C. Lu, “Rolling bearing fault detection based on the teager energy operator and elman neural network,” Mathematical Problems in Engineering, vol. 2013, Article ID 498385, 10 pages, 2013. View at Publisher · View at Google Scholar
  5. W. Wang and O. A. Jianu, “A smart sensing unit for vibration measurement and monitoring,” IEEE/ASME Transactions on Mechatronics, vol. 15, no. 1, pp. 70–78, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. D. C. Martinez, M. V. Rodriguez, A. G. Perez, R. A. O. Rios, and R. J. R. Troncoso, “Empirical mode decomposition and neural networks on FPGA for fault diagnosis in induction motors,” The Scientific World Journal, vol. 2014, Article ID 908140, 17 pages, 2014. View at Publisher · View at Google Scholar
  7. M. Iorgulescu, R. Beloiu, and M. O. Popescu, “Vibration monitoring for diagnosis of electrical equipment's faults,” in Proceedings of the 12th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM '10), pp. 493–499, May 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Garcia-Perez, R. D. J. Romero-Troncoso, E. Cabal-Yepez, and R. A. Osornio-Rios, “The application of high-resolution spectral analysis for identifying multiple combined faults in induction motors,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 2002–2010, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Teotrakool, M. J. Devaney, and L. Eren, “Adjustable-speed drive bearing-fault detection via wavelet packet decomposition,” IEEE Transactions on Instrumentation and Measurement, vol. 58, no. 8, pp. 2747–2754, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Arabaci and O. Bilgin, “Effects of rotor faults in squirrel-cage induction motors on the torque-speed curve,” in Proceedings of the 19th International Conference on Electrical Machines (ICEM '10), pp. 1–5, Rome, Italy, September 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Blodt, J. Regnier, M. Chabert, and J. Faucher, “Fault indicators for stator current based detection of torque oscillations in induction motors at variable speed using time-frequency analysis,” in Proceedings of the 3rd IET Conference on Power Electronics, Machines and Drives, pp. 56–60, March 2006.
  12. H. Ocak and K. A. Loparo, “Estimation of the running speed and bearing defect frequencies of an induction motor from vibration data,” Mechanical Systems and Signal Processing, vol. 18, no. 3, pp. 515–533, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. S. Guedidi, S. E. Zouzou, W. Laala, M. Sahraoui, and K. Yahia, “Broken bar fault diagnosis of induction motors using MCSA and neural network,” in Proceedings of the 8th IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED '11), pp. 632–637, September 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. F. M. C. Santos, I. N. D. Silva, and M. Suetake, “Neural network classifier for faults detection in induction motors,” in Proceedings of the IEEE International Computer Applications Technology Conference, pp. 1–5, 2013.
  15. C. L. Chuang, Y. L. Lu, T. L. Huang, Y. T. Hsiao, and J. A. Jiang, “Recognition of multiple PQ disturbances using dynamic structure neural networks—part 1: theoretical introduction,” in Proceedings of the IEEE/PES Transmission and Distribution Conference and Exhibition: Asia and Pacific, pp. 1–6, Dalian, China, August 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. E. P. De Moura, C. R. Souto, A. A. Silva, and M. A. S. Irmão, “Evaluation of principal component analysis and neural network performance for bearing fault diagnosis from vibration signal processed by RS and DF analyses,” Mechanical Systems and Signal Processing, vol. 25, no. 5, pp. 1765–1772, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Abouhnik, R. G. Ibrahim, R. Shnibha, and A. Albarbar, “Novel approach to rotating machinery diagnostics based on principal component and residual matrix analysis,” ISRN Mechanical Engineering, vol. 2012, Article ID 715893, 7 pages, 2012. View at Publisher · View at Google Scholar
  18. B. Ayhan, M. Y. Chow, and M. H. Song, “Multiple discriminant analysis and neural-network-based monolith and partition fault-detection schemes for broken rotor bar in induction motors,” IEEE Transactions on Industrial Electronics, vol. 53, no. 4, pp. 1298–1308, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. S. D. Wang and C. H. Hsu, “Terminal attractor learning algorithms for back propagation neural networks,” in Proceedings of the IEEE International Joint Conference on Neural Networks (IJCNN '91), pp. 183–189, November 1991. View at Scopus
  20. J. Yu, Q. Tian, T. Rui, and T. S. Huang, “Integrating discriminant and descriptive information for dimension reduction and classification,” IEEE Transactions on Circuits and Systems for Video Technology, vol. 17, no. 3, pp. 372–377, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. D. C. Montgomery, Introduction to Statistical Quality Control, John Wiley & Son, New York, NY, USA, 6 edition, 2009.