Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 340140, 17 pages
http://dx.doi.org/10.1155/2014/340140
Research Article

Modeling and Analysis of Coupling Performance of Dynamic Stiffness Models for a Novel Combined Radial-Axial Hybrid Magnetic Bearing

1Fundamental Sciency on Novel Inertial Instrument & Navitation System Technoloty Laboratory, Beijing 100191, China
2Science and Technology on Inertial Laboratory, Beijing 100191, China
3School of Instrument Science and Opto-electronics Engineering, Beihang University, Beijing 100191, China

Received 27 June 2013; Accepted 18 November 2013; Published 12 January 2014

Academic Editor: Paulo Batista Gonçalves

Copyright © 2014 Bangcheng Han and Shiqiang Zheng. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Fang and Y. Ren, “High-precision control for a single-gimbal magnetically suspended control moment gyro based on inverse system method,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 4331–4342, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. Z. Yang, L. Zhao, and H. Zhao, “Global linearization and microsynthesis for high-speed grinding spindle with active magnetic bearings,” IEEE Transactions on Magnetics, vol. 38, no. 1, pp. 250–256, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Hijikata, S. Kobayashi, M. Takemoto, Y. Tanaka, A. Chiba, and T. Fukao, “Basic characteristics of an active thrust magnetic bearing with a cylindrical rotor core,” IEEE Transactions on Magnetics, vol. 44, no. 11, pp. 4167–4170, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. C. H. Park, S. K. Choi, and S. Y. Ham, “Design and control for hybrid magnetic thrust bearing for turbo refrigerant compressor,” in Proceedings of the IEEE International Conference on Automation Science and Engineering (CASE '11), pp. 792–797, Trieste, Italy, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. K.-C. Lee, Y.-H. Jeong, D.-H. Koo, and H. J. Ahn, “Development of a radial active magnetic bearing for high speed turbo-machinery motors,” in Proceedings of the SICE-ICASE International Joint Conference, pp. 1543–1548, Busan, Republic of Korea, October 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Imoberdorf, C. Zwyssig, S. D. Round, and J. W. Kolar, “Combined radial-axial magnetic bearing for a 1 kW, 500,000 rpm permanent magnet machine,” in Proceedings of the 22nd Annual IEEE Applied Power Electronics Conference and Exposition (APEC '07), pp. 1434–1440, Anaheim, Calif, USA, March 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Imoberdorf, T. Nussbaumer, and J. W. Kolar, “Analysis of a combined radial-axial magnetic bearing for a high-speed drive system,” in Proceedings of the 5th IET International Conference on Power Electronics, Machines and Drives (PEMD '10), pp. 1–6, Brighton, UK, April 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. J. M. Watkins, G. Brown, and K. Blumenstock, “Control of integrated radial and axial magnetic bearings,” in Proceedings of the 33rd Southeastern Symposium on System Theory, pp. 1–5, Athens, Ohio, USA, March 2001. View at Publisher · View at Google Scholar
  9. K. A. Blumenstock and G. L. Brown, “Novel integrated radial and axial magnetic bearing,” in Proceedings of the 7th International Symposium on Magnetic Bearings, pp. 467–472, Zurich, Switzerland, August 2000.
  10. H. Zhu, Z. Xie, and D. Zhu, “Principles and parameter design for AC-DC three-degree freedom hybrid magnetic bearings,” Chinese Journal of Mechanical Engineering, vol. 19, no. 4, pp. 534–539, 2006. View at Google Scholar · View at Scopus
  11. Z. Xie, H. Zhu, and Y. Sun, “Structure and control of AC-DC three-degree-of-freedom hybrid magnetic bearing,” in Proceedings of the 11th International Conference on Electrical Machines and System, pp. 1801–1806, Wuhan, China, 2008.
  12. P. T. McMullen, C. S. Huynh, and R. J. Hayes, “Combination radial-axial magnetic bearing,” in Proceedings of the 7th International Symposium on Magnetic Bearings, pp. 473–478, Zurich, Switzerland, August 2000.
  13. N. Wei, W. Qinghai, J. Defei, H. Xiaofeng, and Z. Tao, “Study on measuring and control system of AC radial-axial hybrid magnetic bearing used in wind energy generation system,” in Proceedings of the 31st Chinese Control Conference (CCC '12), pp. 6847–6850, Hefei, China, July 2012.
  14. Y.-K. Sun and Z.-Y. Zhu, “Inverse-model identification and decoupling control based on least squares support vector machine for 3 degree-of-freedom hybrid magnetic bearing,” Proceedings of the Chinese Society of Electrical Engineering, vol. 30, no. 15, pp. 112–117, 2010 (Chinese). View at Google Scholar · View at Scopus
  15. F. Jiancheng, S. Jinji, L. Hu, and T. Jiqiang, “A novel 3-DOF axial hybrid magnetic bearing,” IEEE Transactions on Magnetics, vol. 46, no. 12, pp. 4034–4045, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Tsuchida, M. Takemoto, and S. Ogasawara, “A novel structure of a 3-axis active control type magnetic bearing with a cylindrical rotor,” in Proceedings of the International Conference on Electrical Machines and Systems (ICEMS '10), pp. 1695–1700, Incheon, Republic of Korea, October 2010. View at Scopus
  17. U. J. Na, “Design and analysis of a new permanent magnet biased integrated radial-axial magnetic bearing,” International Journal of Precision Engineering and Manufacturing, vol. 13, no. 1, pp. 133–136, 2012. View at Publisher · View at Google Scholar
  18. L. Huang, G. Zhao, H. Nian, and Y. He, “Modeling and design of permanent magnet biased radial-axial magnetic bearing by extended circuit theory,” in Proceedings of the International Conference on Electrical Machines and Systems (ICEMS '07), pp. 1502–1507, Seoul, Republic of Korea, October 2007. View at Scopus
  19. S. Fukata, Y. Kouya, T. Shimomachi, Y. Mizumachi, and M. Kuga, “Dynamics of active magnetic thrust bearings,” JSME International Journal. Series III, vol. 34, no. 3, pp. 404–410, 1991. View at Google Scholar · View at Scopus
  20. J. J. Feeley, “A simple dynamic model for eddy currents in a magnetic actuator,” IEEE Transactions on Magnetics, vol. 32, no. 2, pp. 453–458, 1996. View at Publisher · View at Google Scholar · View at Scopus
  21. L. Kucera and M. Ahrens, “A model for axial magnetic bearings including eddy currents,” in Proceedings of the 3rd International Symposium on Magnetic Suspension Technology, Tallahassee, Fla, USA, December 1995.
  22. L. Zhu, C. R. Knospe, and E. H. Maslen, “Frequency domain modeling of non-laminated cylindrical magnetic actuators,” in Proceedings of the 9th International Symposium on Magnetic Bearings, Lexington, Ky, USA, August 2004.
  23. L. Zhu, C. R. Knospe, and E. H. Maslen, “Analytic model for a nonlaminated cylindrical magnetic actuator including eddy currents,” IEEE Transactions on Magnetics, vol. 41, no. 4, pp. 1248–1258, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. L. Zhu and C. R. Knospe, “Modeling of nonlaminated electromagnetic suspension systems,” IEEE/ASME Transactions on Mechatronics, vol. 15, no. 1, pp. 59–69, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. Sun, Active magnetic bearing: eddy current loss, nonlinear vibration and unbalance compensation [Ph.D. thesis], Xi’an Jiaotong University, Xi’an, China, 2001 (Chinese).
  26. J. R. Brauer, J. J. Ruehl, and F. Hirtenfelder, “Coupled nonlinear electromagnetic and structural finite element analysis of an actuator excited by an electric circuit,” IEEE Transactions on Magnetics, vol. 31, no. 3, pp. 1861–1864, 1995. View at Google Scholar · View at Scopus
  27. J. R. Brauer and Q. M. Chen, “Alternative dynamic electromechanical models of magnetic actuators containing eddy currents,” IEEE Transactions on Magnetics, vol. 36, no. 4, pp. 1333–1336, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Kawase, T. Yamaguchi, K. Iwashita, T. Kobayashi, and K. Suzuki, “3-D finite element analysis of dynamic characteristics of electromagnet with permanent magnets,” IEEE Transactions on Magnetics, vol. 42, no. 4, pp. 1339–1342, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Tian, Y. Sun, and L. Yu, “Modeling of Switching Ripple Currents (SRCs) for magnetic bearings including eddy current effects,” International Journal of Applied Electromagnetics and Mechanics, vol. 33, no. 1-2, pp. 791–799, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Sun, Y.-S. Ho, and L. Yu, “Dynamic stiffnesses of active magnetic thrust bearing including eddy-current effects,” IEEE Transactions on Magnetics, vol. 45, no. 1, pp. 139–149, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. B. Han, S. Zheng, and X. Hu, “Dynamic factor models of a thrust magnetic bearing with permanent magnet bias and subsidiary air gap,” IEEE Transactions on Magnetics, vol. 49, no. 3, pp. 1221–1230, 2013. View at Publisher · View at Google Scholar
  32. K. Muramatsu, T. Shimizu, A. Kameari et al., “Analysis of eddy currents in surface layer of laminated core in magnetic bearing system using leaf edge elements,” IEEE Transactions on Magnetics, vol. 42, no. 4, pp. 883–886, 2006. View at Publisher · View at Google Scholar · View at Scopus
  33. H.-Y. Kim and C.-W. Lee, “Analysis of eddy-current loss for design of small active magnetic bearings with solid core and rotor,” IEEE Transactions on Magnetics, vol. 40, no. 5, pp. 3293–3301, 2004. View at Publisher · View at Google Scholar · View at Scopus
  34. P. E. Allaire, R. L. Fittro, E. H. Maslen, and W. C. Wakefield, “Eddycurrents, magnetic flux and force in solid magnetic thrust bearings,” in Proceedings of the 4th International Symposium on Magnetic Bearings, pp. 157–163, Zurich, Switzerland, August 1994. View at Scopus
  35. R. T. DeWeese, A. B. Palazzolo, M. Chinta, and A. Kascak, “Magnetic thrust bearing concepts: tests and analyses,” Journal of Intelligent Material Systems and Structures, vol. 9, no. 2, pp. 81–85, 1998. View at Google Scholar · View at Scopus
  36. C. R. Knospe and L. Zhu, “Performance limitations of non-laminated magnetic suspension systems,” IEEE Transactions on Control Systems Technology, vol. 19, no. 2, pp. 327–336, 2011. View at Publisher · View at Google Scholar · View at Scopus