Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 397538, 9 pages
http://dx.doi.org/10.1155/2014/397538
Research Article

An Analytical Tire Model with Flexible Carcass for Combined Slips

1State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun, Jilin 130022, China
2State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha, Hunan 410082, China
3Department of Engineering, Faculty of Engineering and Science, University of Agder, 4898 Grimstad, Norway

Received 27 October 2013; Accepted 19 December 2013; Published 2 January 2014

Academic Editor: Xiaojie Su

Copyright © 2014 Nan Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. H. Guo, Handling Dynamics of Automobiles, Jilin Press of Science and Technology, 1991, Chinese.
  2. J. C. Dixon, Tires, Suspension and Handling, The SAE Publications Group, Warrendale, Pa, USA, 2nd edition, 1996.
  3. H. B. Pacejka, Tyre and Vehicle Dynamics, Butterworth Heinemann, 2002.
  4. C. Z. Yin, L. Bu, and H. T. Gong, “Mathematical model and algorithm of split load vehicle routing problem with simultaneous delivery and pickup,” International Journal of Innovative Computing, Information and Control, vol. 9, no. 11, pp. 4497–4508, 2013. View at Google Scholar
  5. J. E. Bernard, L. Segel, and R. E. Wild:, “Tire shear force generation during combined steering and braking maneuvers,” SAE Transactions 770852, 1977. View at Publisher · View at Google Scholar
  6. H. Sakai, “Theoretical and experimental studies on the dynamics properties of tyres,” International Journal of Vehicle Design, vol. 2, no. 3, pp. 335–372, 1981. View at Google Scholar · View at Scopus
  7. G. Gim and P. E. Nikravesh, “Analytical model of pneumatic tyres for vehicle dynamic simulations—part 1: pure slips,” International Journal of Vehicle Design, vol. 11, no. 6, pp. 589–618, 1990. View at Google Scholar · View at Scopus
  8. H. B. Pacejka and R. S. Sharp, “Shear force development by pneumatic tyres in steady state conditions: a review of modelling aspects,” Vehicle System Dynamics, vol. 20, no. 3-4, pp. 121–176, 1991. View at Google Scholar · View at Scopus
  9. H. B. Pacejka and E. Bakker, “The magic formula tyre model,” Vehicle System Dynamics, vol. 21, pp. 1–18, 1993. View at Google Scholar · View at Scopus
  10. D. J. Schuring, W. Pelz, and M. G. Pottinger, “A model for combined tire cornering and braking forces,” SAE 960180, 1996. View at Google Scholar
  11. K. H. Guo and L. Ren, “A unified semi-empirical tire model with higher accuracy and less parameters,” SAE Technical Paper 1999-01-0785.
  12. J. Svendenius and M. Gäfvert, “A semi-empirical dynamic tire model for combined-slip forces,” Vehicle System Dynamics, vol. 44, no. 2, pp. 189–208, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. M. K. Salaani, “Analytical tire forces and moments with validated data,” SAE Technical Paper 2007-01-0816, 2007. View at Google Scholar
  14. K. Guo, Y. Zhuang, D. Lu, S.-K. Chen, and W. Lin, “A study on speed-dependent tyre-road friction and its effect on the force and the moment,” Vehicle System Dynamics, vol. 43, pp. 329–340, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Guo, N. Xu, D. Lu, and J. Yang, “A Model for combined tire cornering and braking forces with anisotropic tread and carcass stiffness,” SAE International Journal of Commercial Vehicles, vol. 4, no. 1, pp. 84–95, 2011. View at Publisher · View at Google Scholar · View at Scopus