Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 437158, 20 pages
http://dx.doi.org/10.1155/2014/437158
Research Article

A Study on Fluid Self-Excited Flutter and Forced Response of Turbomachinery Rotor Blade

Department of Refrigeration, Air Conditioning and Energy Engineering, National Chin-Yi University of Technology, Taichung City 41170, Taiwan

Received 29 January 2014; Accepted 4 April 2014; Published 29 May 2014

Academic Editor: Her-Terng Yau

Copyright © 2014 Chih-Neng Hsu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. W. D. Chiang and R. E. Kielb, “Analysis system for blade forced response,” ASME Journal of Turbomachinery, vol. 115, no. 4, pp. 762–770, 1993. View at Publisher · View at Google Scholar · View at Scopus
  2. H. W. D. Chiang and M. G. Turner, “Compressor blade forced response due to downstream vane-strut potential interaction,” ASME Journal of Turbomachinery, vol. 118, no. 1, pp. 134–142, 1996. View at Publisher · View at Google Scholar
  3. D. V. Murthy and G. L. Stefko, “FREPS-A forced response prediction system for turbomachinery blade rows,” AIAA Paper 92-3072, 1992. View at Google Scholar
  4. R. E. Kielb and H. W. D. Chiang, “Recent advancements in turbomachinery forced response analyses,” in Proceeding of the 30th AIAA Aerospace Science Meeting, AIAA Paper 92-0012, Reno, Nev, USA, January 1992.
  5. M. S. Izsak and H. W. D. Chiang, “Turbine and compressor wake modeling for blade forced response,” ASME Paper 93-GT-148, 1993. View at Google Scholar
  6. S. R. Manwaring and D. C. Wisler, “Unsteady aerodynamics and gust response in compressors and turbines,” ASME Journal of Turbomachinery, vol. 115, no. 4, pp. 724–740, 1993. View at Publisher · View at Google Scholar · View at Scopus
  7. S. R. Manwaring, D. C. Rabe, C. B. Lorence, and A. R. Wadia, “Inlet distortion generated forced response of a low-aspect-ratio transonic fan,” ASME Journal of Turbomachinery, vol. 119, no. 4, pp. 665–676, 1997. View at Publisher · View at Google Scholar
  8. K. Willcox, J. Peraire, and J. D. Paduano, “Application of model order reduction to compressor aeroelastic models,” ASME Paper 2000-GT-0377, 2000. View at Google Scholar
  9. K. C. Hall and P. D. Silkowski, “The influence of neighboring blade rows on the unsteady aerodynamic response of cascades,” ASME Journal of Turbomachinery, vol. 119, no. 1, pp. 85–92, 1997. View at Publisher · View at Google Scholar
  10. P. D. Silkowski and K. C. Hall, “A coupled mode analysis of unsteady multistage flows in turbomachinery,” ASME Journal of Turbomachinery, vol. 120, no. 3, pp. 410–421, 1998. View at Google Scholar · View at Scopus
  11. S. R. Manwaring and S. Fleeter, “Rotor blade unsteady aerodynamic gust response to inlet guide vane wakes,” ASME Paper 91-GT-129, 1991. View at Google Scholar
  12. R. Phibel and L. di Mare, “Comparison between a CFD and three-control-volume model for labyrinth seal flutter predictions,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-46281, ASME International Gas Turbine Institute, Vancouver, Canada, June 2011.
  13. C. Peng, “Tip running clearances effects on tip vortices induced axial compressor rotor flutter,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-45504, ASME International Gas Turbine Institute, Vancouver, Canada, June 2011.
  14. P. Vasanthakumar, “Computation of aerodynamic damping for flutter analysis of a transonic fan,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-46597, ASME International Gas Turbine Institute, Vancouver, Canada, June 2011.
  15. R. Antona, R. Corral, J. M. Gallardo, and C. Martel, “Effect of the structural coupling on the flutter onset of a sector of flow-pressure turbine vanes,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-23037, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  16. R. Srivastava, J. Panovsky, R. Kielb, L. Virgin, and K. Ekici, “Non-linear flutter in fan stator vanes with time dependent fixity,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-22555, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  17. L. Li and P. Wang, “Evaluation of high-order resonance of blade under wake excitation,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-23148, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  18. E. Johann, B. Muck, and J. Nipkau, “Experimental and numerical flutter investigation of the 1st stage rotor in 4-stage high speed compressor,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2008-50698, ASME International Gas Turbine Institute, Berlin, Germany, June 2008.
  19. O. G. McGee III and C. Fang, “A reduced-order integrated design synthesis for the three-dimensional tailored vibration response and flutter control of high-bypass shroudless fans,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2008-51479, ASME International Gas Turbine Institute, Berlin, Germany, June 2008.
  20. M. Aotsuka, N. Tsuchiya, Y. Horiguchi, O. Nozaki, and K. Yamamoto, “Numerical simulation of transonic fan flutter with 3D N-S CFD code,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2008-50573, ASME International Gas Turbine Institute, Berlin, Germany, June 2008.
  21. A. Zemp, R. S. Abhari, and M. Schleer, “Experimental investigation of forced response impeller blade vibration in a centrifugal compressor with variable inlet guide vanes part 1: blade damping,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-46289, ASME International Gas Turbine, Vancouver, Canada, June 2011.
  22. A. Zemp, R. S. Abhari, and M. Schleer, “Experimental investigation of forced response impeller blade vibration in a centrifugal compressor with variable Inlet guide vanes part 2: forcing function and FSI computations,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-46290, ASME International Gas Turbine Institute, Vancouver, Canada, June 2011.
  23. B. Zhou, A. Mujezinovic, A. Coleman, W. Ning, and A. Ansari, “Forced response prediction for steam turbine last stage blade subject to low engine order excitation,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-46856, Vancouver, Canada, June 2011.
  24. A. Hohi, B. Kriegesmann, J. Wallaschek, and L. Panning, “The influence of blade properties on the forced response of mistuned bladed disks,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2011-46826, ASME International Gas Turbine Institute, Vancouver, Canada, June 2011.
  25. C. Siewert and H. Stuer, “Forced response analysis of mistuned turbine bladings,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-23782, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  26. C. Heinz, M. Schatz, M. V. Casey, and H. Stuer, “Experimental and analysis investigations of a low pressure model turbine during forced response excitation,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-22146, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  27. V. Kharyton, J. P. Laine, F. Thouverez, and O. Kucher, “Simulation of tip-timing measurements of a cracked bladed disk forced response,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-22388, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  28. E. P. Petrov, “Reduction of forced response levels for bladed discs by mistuning: overview of the phenomenon,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2010-23299, ASME International Gas Turbine Institute, Glasgow, UK, June 2010.
  29. W. W. Gu, Z. Xu, and Q. Lv, “Forced response of shrouded blades with intermittent dry friction force,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2008-51041, ASME International Gas Turbine Institute, Berlin, Germany, June 2008.
  30. J. S. Green, “Forced response of a large civil fan assembly,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2008-50319, ASME International Gas Turbine Institute, Berlin, Germany, June 2008.
  31. S. Dhandapani, M. Vahdati, and M. Imregun, “Forced response and surge behaviour of IP core-compressors with ICE-damaged rotor blades,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2008-50335, ASME International Gas Turbine Institute, Berlin, Germany, June 2008.
  32. L. Lin, Z. Luo, and J. Xiang, “Simplified modeling and parameters analysis on whirl flutter of tiltrotor,” in Proceeding of the 8th Cross-Straits Conference on Aeronautics and Astronautics, pp. 282–289, Beijing, China, September 2012.
  33. J. Tang, C. Xie, and C. Yang, “Vibration and flutter analysis of aircraft wing using equivalent-plate models,” in Proceeding of the 8th Cross-straits Conference on Aeronautics and Astronautics, pp. 311–318, Beijing, China, September 2012.
  34. H. Zhang, C. Xie, and C. Yang, “Application of HHT and flutter margin method for flutter boundary prediction,” in Proceeding of the 8th Cross-straits Conference on Aeronautics and Astronautics, pp. 335–342, Beijing, China, September 2012.
  35. R. Rzadkowski, Flutter of Turbine Rotor Blades in Inviscid Flow, AMW Wewn. 1050/2004, Akademia Marynarki Wojennej, Gdynia, Poland, 2004.
  36. S. N. Smith, Discrete Frequency Sound Generation in Axial Flow Turbomachines, R & M, 3709, British Aeronautical Research Council, London, UK, 1972.
  37. F. Lane, “System mode shapes in the flutter of compressor blade rows,” Journal of the Aeronautical Science, vol. 23, no. 1, pp. 54–66, 1956. View at Publisher · View at Google Scholar
  38. A. V. Srinivasan, “Flutter and resonant vibration characteristics of engine blades,” ASME Journal of Engineering For Gas Turbines and Power, vol. 119, no. 1, pp. 742–775, 1997. View at Publisher · View at Google Scholar
  39. F. Moyroud, J. G. Richardet, and T. Fransson, “A modal coupling for fluid and structure analyses of turbomachine flutter: application to a fan stage,” ASME Paper 96-GT-335, 1996. View at Google Scholar
  40. E. F. Crawley, “Aeroelastic formulation for tuned and mistuned rotors,” in AGARD Manual on Aeroelasticity in Axial-Flow Turbomachines, vol. 2, Structural Dynamics and Aeroelasticity, 1988. View at Google Scholar
  41. K. C. Hall and P. D. Silkowski, “The influence of neighboring blade rows on the unsteady aerodynamic response of cascades,” ASME Journal of Turbomachinery, vol. 119, no. 1, pp. 85–92, 1997. View at Publisher · View at Google Scholar
  42. C. N. Hsu, Turbomachinery blading flutter and forced response due to unsteady aerodynamics [Ph.D. Dissertation], National Tsing Hua University, 2005.
  43. H. W. D. Chiang, C. Chen, and C. Hsu, “Prediction of shrouded turbomachinery blade flutter by a complex mode analysis,” International Journal of Turbo and Jet Engines, vol. 22, no. 2, pp. 89–101, 2005. View at Google Scholar · View at Scopus
  44. H. W. D. Chiang, C. C. Chen, C. N. Hsu, G. C. Tsai, and K. L. Koai, “An investigation of turbomachinery shrouded rotor blade flutter,” in Proceedings of the ASME TURBO EXPO: Power for Land, Sea, and Air, GT2003-38311, ASME International Gas Turbine Institute, Atlanta, Ga, USA, June 2003.
  45. H. W. D. Chiang and C. N. Hsu, “Prediction of shrouded turbomachinery blade forced response by a complex mode analysis,” in Proceedings of the GT ASME IGTI Turbo Expo: Power for Land, Sea and Air, GT2006-90112, Barcelona, Spain, May 2006.
  46. H. W. D. Chiang and C. N. Hsu, “Turbomachine shrouded rotor blade forced response analysis,” International Journal of Turbo and Jet Engines, vol. 25, no. 3, pp. 179–188, 2008. View at Google Scholar · View at Scopus