Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 535703, 7 pages
Research Article

Design of Elliptic Reflective LED Surgical Shadowless Lamps Using Mathematical Optical Tracing Algorithms

1Department of Mechanical and Electro-Mechanical Engineering, Center for Nanoscience and Nanotechnology, National Sun Yat-Sen University, Kaohsiung 80424, Taiwan
2Department of the Mechanical and Automation Engineering, National Kaohsiung First University of Science and Technology, Kaohsiung 811, Taiwan

Received 12 June 2014; Accepted 11 September 2014; Published 29 September 2014

Academic Editor: Teen-Hang Meen

Copyright © 2014 Cheng-Tang Pan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. A. Tran, C.-F. Chu, C.-C. Cheng et al., “High brightness GaN vertical light emitting diodes on metal alloyed substrate for general lighting application,” Journal of Crystal Growth, vol. 298, pp. 722–724, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. K. R. Hardy, M. S. Olsson, J. R. Sanderson et al., “High brightness light emitting diodes for ocean applications,” in Proceedings of the Oceans MTS/IEEE Conference, Vancouver, Canada, October 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. W. H. Dorman, “Lighting device for dental and surgical procedures,” U.S. Patent 3511983, 1970. View at Google Scholar
  4. W. H. Dorman, “Reflector,” U.S. PATENT 4149227, 1979.
  5. S. A. Michael and F. H. Holt, “Surgical light with conical reflector,” U.S. Patent no. 5,913,599, 1999.
  6. H. Ries and J. Muschaweck, “Tailored freeform optical surfaces,” Journal of the Optical Society of America A, vol. 19, no. 3, pp. 590–595, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  7. F. Fournier, Freeform reflector design with extended sources [M.S. thesis], 2010.
  8. C. Canavesi, W. J. Cassarly, and J. P. Rolland, “Direct calculation algorithm for two-dimensional reflector design,” Optics Letters, vol. 37, no. 18, pp. 3852–3854, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Chen, Q. Zhu, Q. Chen, Q. Luo, X. Zhu, and B. Yu, “Reflector design of light emitting diode for uniform illuminance,” in Proceedings of the International Symposium on Photonics and Optoelectronics (SOPO '12), pp. 1–4, May 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. H. H. Frazier and A. M. Smith, “Surgical light with conical reflector,” STERIS Corporation, US Patent US5913599, 1999.
  11. U. Gampe and S. Greif, “Reflector for a radiating luminous source and use of the same,” US6080464A1, 2000.
  12. W. Harry, “Reflector for dental and surgical operating room lighting fixtures,” U.S. PATENT 494257, 1990.
  13. Medical electrical equipment particular requirements for the safety of surgical luminaries and luminaries for diagnosis in accordance with IEC-60601-2-41.
  14. “Prp/E, WILDFIRE 5.0,” Needhamm, Mass, USA, 2010.
  15. C. T. Pan, Y. C. Chen, P. H. Lin, C. C. Hsieh, F. T. Hsu, and J. C. Huang, “Lens of controllable optical field with thin film metallic glasses for UV-LEDs,” Optics Express, vol. 22, no. 12, pp. 14411–14424, 2014. View at Publisher · View at Google Scholar
  16. Y. C. Chen, C. T. Pan, C. C. Hsieh, C. Y. Su, H. C. Wu, and W. C. Li, “Fabrication of light extraction efficiency of organic light-emitting diodes with 3D aspherical microlens by using dry etching process,” Journal of Nanomaterials, vol. 2013, Article ID 797534, 6 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus