Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 627528, 9 pages
http://dx.doi.org/10.1155/2014/627528
Research Article

Simulation of Microstructure during Laser Rapid Forming Solidification Based on Cellular Automaton

1School of Mechatronics Engineering, Shenyang Aerospace University, Shenyang, Liaoning 110136, China
2Institute of Metal Research, Chinese Academy of Sciences, Shenyang, Liaoning 110016, China

Received 9 June 2014; Accepted 15 July 2014; Published 5 August 2014

Academic Editor: Jun Liu

Copyright © 2014 Zhi-jian Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Frank Liou, Jingwei Zhang, William Seufzer, and Karen Taminger, “A coupled finite element cellular automaton model to predict thermal history and grain morphology of Ti-6Al-4V during direct metal deposition (DMD),” Additive Manufacturing, vol. 11, pp. 32–39, 2016. View at Publisher · View at Google Scholar
  • Tsung-Wen Tsai, Amir Reza Ansari Dezfoli, Weng-Sing Hwang, and Wei-Chin Huang, “Determination and controlling of grain structure of metals after laser incidence: Theoretical approach,” Scientific Reports, vol. 7, 2017. View at Publisher · View at Google Scholar
  • Xiaohong Zhan, Xin Lin, Zhuanni Gao, Chaoqi Qi, Dongdong Gu, and Junjie Zhou, “Modeling and simulation of the columnar-to-equiaxed transition during laser melting deposition of Invar alloy,” Journal of Alloys and Compounds, vol. 755, pp. 123–134, 2018. View at Publisher · View at Google Scholar
  • Min Zhang, Yulan Zhou, Chao Huang, Qiaoling Chu, Wenhui Zhang, and Jihong Li, “Simulation of Temperature Distribution and Microstructure Evolution in the Molten Pool of GTAW Ti-6Al-4V Alloy,” Materials, vol. 11, no. 11, pp. 2288, 2018. View at Publisher · View at Google Scholar
  • Irving Barragan-Vite, Juan C. Seck-Tuoh-Mora, Norberto Hernandez-Romero, Joselito Medina-Marin, and Eva S. Hernandez-Gress, “Distributed Control of a Manufacturing System with One-Dimensional Cellular Automata,” Complexity, vol. 2018, pp. 1–15, 2018. View at Publisher · View at Google Scholar
  • Sainan Cao, Hai Gu, Jianchun Yang, Bin Li, Jie Jiang, Jie Zhang, and Ningping Xu, “Laser rapid forming processing of TiC reinforced nickel-based superalloy composites: Influence of additive TiC particle content,” Journal of Laser Applications, vol. 31, no. 3, pp. 032004, 2019. View at Publisher · View at Google Scholar
  • Xiaodong Li, Shasha Liu, Jiawei Wang, Mengxiao Yu, and Haibo Tang, “Effect of Different ZrN Addition on Microstructure and Wear Properties of Titanium Based Coatings by Laser Cladding Technique,” Coatings, vol. 9, no. 4, pp. 261, 2019. View at Publisher · View at Google Scholar