Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 646514, 10 pages
http://dx.doi.org/10.1155/2014/646514
Research Article

Stable Cracking Particles Method Based on Stabilized Nodal Integration and Updated Lagrangian Kernel

School of Mechanical Engineering, Jiangnan University, China

Received 27 November 2013; Revised 27 January 2014; Accepted 17 February 2014; Published 7 May 2014

Academic Editor: Goangseup Zi

Copyright © 2014 S. Xu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Li and W. K. Liu, “Meshfree and particle methods and their applications,” Applied Mechanics Reviews, vol. 55, no. 1, pp. 1–34, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Li and W. K. Liu, Meshfree Particle Methods, Springer, 2004. View at MathSciNet
  3. S. Li and D. C. Simkins Jr., “Conserving Galerkin weak formulations for computational fracture mechanics,” Communications in Numerical Methods in Engineering, vol. 18, no. 12, pp. 835–850, 2002. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  4. S. Li and B. C. Simonson, “Meshfree simulation of ductile crack propagation,” International Journal of Computational Methods in Engineering Science and Mechanics, vol. 6, pp. 1–19, 2003. View at Google Scholar
  5. S. Li and B. C. Simonson, “Meshfree simulation of ductile crack propagation,” International Journal of Computational Methods in Engineering Science and Mechanics, vol. 60, no. 8, pp. 1425–1450, 2004. View at Publisher · View at Google Scholar
  6. S. Li, W. Hao, and W. K. Liu, “Mesh-free simulations of shear banding in large deformation,” International Journal of Solids and Structures, vol. 37, no. 48, pp. 7185–7206, 2000. View at Google Scholar · View at Scopus
  7. S. Li, W. Hao, and W. K. Liu, “Numerical simulations of large deformation of thin shell structures using meshfree methods,” Computational Mechanics, vol. 25, no. 2, pp. 102–116, 2000. View at Google Scholar · View at Scopus
  8. S. Li, W. K. Liu, A. J. Rosakis, T. Belytschko, and W. Hao, “Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition,” International Journal of Solids and Structures, vol. 39, no. 5, pp. 1213–1240, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. A. G. Petschek and L. D. Libersky, “Cylindrical smoothed particle hydrodynamics,” Journal of Computational Physics, vol. 109, no. 1, pp. 76–83, 1993. View at Publisher · View at Google Scholar · View at Scopus
  10. T. Rabczuk and J. Eibl, “Modelling dynamic failure of concrete with meshfree methods,” International Journal of Impact Engineering, vol. 32, no. 11, pp. 1878–1897, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Rabczuk and J. Eibl, “Simulation of high velocity concrete fragmentation using SPH/MLSPH,” International Journal for Numerical Methods in Engineering, vol. 56, no. 10, pp. 1421–1444, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Rabczuk, J. Eibl, and L. Stempniewski, “Numerical analysis of high speed concrete fragmentation using a meshfree Lagrangian method,” Engineering Fracture Mechanics, vol. 71, no. 4–6, pp. 547–556, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Rabczuk, S. P. Xiao, and M. Sauer, “Coupling of mesh-free methods with finite elements: Basic concepts and test results,” Communications in Numerical Methods in Engineering, vol. 22, no. 10, pp. 1031–1065, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. P. W. Randles and L. D. Libersky, “Recent improvements in SPH modeling of hypervelocity impact,” International Journal of Impact Engineering, vol. 20, no. 6–10, pp. 525–532, 1997. View at Google Scholar · View at Scopus
  15. T. Belytschko, Y. Y. Lu, L. Gu, and M. Tabbara, “Element-free galerkin methods for static and dynamic fracture,” International Journal of Solids and Structures, vol. 32, no. 17-18, pp. 2547–2570, 1995. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Belytschko, Y. Krongauz, D. Organ, M. Fleming, and P. Krysl, “Meshless methods: an overview and recent developments,” Computer Methods in Applied Mechanics and Engineering, vol. 139, no. 1–4, pp. 3–47, 1996. View at Google Scholar · View at Scopus
  17. W. K. Liu, S. J. Jun, and Y. F. Zhang, “Reproducing kernel particle methods,” International Journal for Numerical Methods in Fluids, vol. 20, no. 8-9, pp. 1081–1106, 1995. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  18. V. P. Nguyen, T. Rabczuk, S. Bordas, and M. Duflot, “Meshless methods: a review and computer implementation aspects,” Mathematics and Computers in Simulation, vol. 79, no. 3, pp. 763–813, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Rabczuk and T. Belytschko, “Adaptivity for structured meshfree particle methods in 2D and 3D,” International Journal for Numerical Methods in Engineering, vol. 63, no. 11, pp. 1559–1582, 2005. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  20. P. W. Randles and L. D. Libersky, “Normalized SPH with stress points,” International Journal for Numerical Methods in Engineering, vol. 48, no. 10, pp. 1445–1462, 2000. View at Google Scholar · View at Scopus
  21. T. Belytschko, Y. Guo, W. K. Liu, and S. P. Xiao, “A unified stability analysis of meshless particle methods,” International Journal for Numerical Methods in Engineering, vol. 48, no. 9, pp. 1359–1400, 2000. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  22. T. Rabczuk, T. Belytschko, and S. P. Xiao, “Stable particle methods based on Lagrangian kernels,” Computer Methods in Applied Mechanics and Engineering, vol. 193, no. 12–14, pp. 1035–1063, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  23. T. Rabczuk, S. Bordas, and G. Zi, “A three dimensional meshfree method for static and dynamic multiple crack nucleation/propagation with crack path continuity,” Computational Mechanics, vol. 40, no. 3, pp. 473–495, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Areias and T. Rabczuk, “Finite strain fracture of plates and shells with configurational forces and edge rotations,” International Journal for Numerical Methods in Engineering, vol. 94, no. 12, pp. 1099–1122, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  25. P. Areias, D. Dias da Costa, J. M. Sargado, and T. Rabczuk, “Element-wise algorithm for modeling ductile fracture with the rousselier yield function,” Computational Mechanics, vol. 52, no. 6, pp. 1429–1443, 2013. View at Publisher · View at Google Scholar
  26. P. Areias, T. Rabczuk, and P. P. Camanho, “Initially rigid cohesive laws and fracture based on edge rotations,” Computational Mechanics, vol. 52, no. 4, pp. 931–947, 2013. View at Google Scholar
  27. P. Areias, T. Rabczuk, and D. Dias da Costa, “Element-wise fracture algorithm based on rotation of edges,” Engineering Fracture Mechanics, vol. 110, pp. 113–137, 2013. View at Publisher · View at Google Scholar
  28. C. Miehe, M. Hofacker, and F. Welschinger, “A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits,” Computer Methods in Applied Mechanics and Engineering, vol. 199, no. 45–48, pp. 2765–2778, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. C. Miehe, F. Welschinger, and M. Hofacker, “Thermodynamically consistent phase-field models of fracture: variational principles and multi-field FE implementations,” International Journal for Numerical Methods in Engineering, vol. 83, no. 10, pp. 1273–1311, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  30. F. Armero and K. Garikipati, “Recent advances in the analysis and numericalsimulation of strain localization in inelastic solids,” in Proceedings of the 4th Computational Plasticity: Fundamentals and Applications Conference (COMPLAS '00), pp. 635–640, 2000.
  31. T. Belytschko and T. Black, “Elastic crack growth in finite elements with minimal remeshing,” International Journal for Numerical Methods in Engineering, vol. 45, no. 5, pp. 601–620, 1999. View at Google Scholar · View at Scopus
  32. T. Belytschko, H. Chen, J. Xu, and G. Zi, “Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment,” International Journal for Numerical Methods in Engineering, vol. 58, no. 12, pp. 1873–1905, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. T. Chau-Dinh, G. Zi, P.-S. Lee, T. Rabczuk, and J.-H. Song, “Phantom-node method for shell models with arbitrary cracks,” Computers & Structures, vol. 92-93, pp. 242–246, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. G. A. Dilts, “Moving-least-squares-particle hydrodynamics. I. Consistency and stability,” International Journal for Numerical Methods in Engineering, vol. 44, no. 8, pp. 1115–1155, 1999. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  35. G. A. Dilts, “Moving least-squares particle hydrodynamics. II. Conservation and boundaries,” International Journal for Numerical Methods in Engineering, vol. 48, no. 10, pp. 1503–1524, 2000. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  36. C. Linder and F. Armero, “Finite elements with embedded strong discontinuities for the modeling of failure in solids,” International Journal for Numerical Methods in Engineering, vol. 72, no. 12, pp. 1391–1433, 2007. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  37. N. Moës, J. Dolbow, and T. Belytschko, “A finite element method for crack growth without remeshing,” International Journal for Numerical Methods in Engineering, vol. 46, no. 1, pp. 131–150, 1999. View at Google Scholar · View at Scopus
  38. S. S. Nanthakumar, T. Lahmer, and T. Rabczuk, “Detection of flaws in piezoelectric structures using extended FEM,” International Journal for Numerical Methods in Engineering, vol. 96, no. 6, pp. 373–389, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  39. J.-H. Song, P. M. A. Areias, and T. Belytschko, “A method for dynamic crack and shear band propagation with phantom nodes,” International Journal for Numerical Methods in Engineering, vol. 67, no. 6, pp. 868–893, 2006. View at Publisher · View at Google Scholar · View at Scopus
  40. T. Strouboulis, K. Copps, and I. Babuška, “The generalized finite element method: An example of its implementation and illustration of its performance,” International Journal for Numerical Methods in Engineering, vol. 47, no. 8, pp. 1401–1417, 2000. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  41. G. Ventura, E. Budyn, and T. Belytschko, “Vector level sets for description of propagating cracks in finite elements,” International Journal for Numerical Methods in Engineering, vol. 58, no. 10, pp. 1571–1592, 2003. View at Publisher · View at Google Scholar · View at Scopus
  42. G. Zi and T. Belytschko, “New crack-tip elements for XFEM and applications to cohesive cracks,” International Journal for Numerical Methods in Engineering, vol. 57, no. 15, pp. 2221–2240, 2003. View at Publisher · View at Google Scholar · View at Scopus
  43. G. Zi, J.-H. Song, E. Budyn, S.-H. Lee, and T. Belytschko, “A method for growing multiple cracks without remeshing and its application to fatigue crack growth,” Modelling and Simulation in Materials Science and Engineering, vol. 12, no. 5, pp. 901–915, 2004. View at Publisher · View at Google Scholar · View at Scopus
  44. G. Zi, H. Chen, J. Xu, and T. Belytschko, “The extended finite element method for dynamic fractures,” Shock and Vibration, vol. 12, no. 1, pp. 9–23, 2005. View at Google Scholar · View at Scopus
  45. F. Amiri, C. Anitescu, M. Arroyo, S. P. A. Bordas, and T. Rabczuk, “XLME interpolants, a seamless bridge between XFEM and enriched meshless methods,” Computational Mechanics, vol. 53, no. 1, pp. 45–57, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  46. S. Bordas, T. Rabczuk, and G. Zi, “Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment,” Engineering Fracture Mechanics, vol. 75, no. 5, pp. 943–960, 2008. View at Publisher · View at Google Scholar · View at Scopus
  47. T. Rabczuk and P. Areias, “A meshfree thin shell for arbitrary evolving cracks based on an extrinsic basis,” Computer Modeling in Engineering and Sciences, vol. 16, no. 2, pp. 115–130, 2006. View at Google Scholar · View at Scopus
  48. T. Rabczuk, G. Zi, S. Bordas, and H. Nguyen-Xuan, “A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures,” Engineering Fracture Mechanics, vol. 75, no. 16, pp. 4740–4758, 2008. View at Publisher · View at Google Scholar · View at Scopus
  49. T. Rabczuk, S. Bordas, and G. Zi, “On three-dimensional modelling of crack growth using partition of unity methods,” Computers & Structures, vol. 88, no. 23-24, pp. 1391–1411, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. T. Rabczuk, R. Gracie, J.-H. Song, and T. Belytschko, “Immersed particle method for fluid-structure interaction,” International Journal for Numerical Methods in Engineering, vol. 81, no. 1, pp. 48–71, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  51. G. Ventura, J. X. Xu, and T. Belytschko, “A vector level set method and new discontinuity approximations for crack growth by EFG,” International Journal for Numerical Methods in Engineering, vol. 54, no. 6, pp. 923–944, 2002. View at Publisher · View at Google Scholar · View at Scopus
  52. G. Zi, T. Rabczuk, and W. Wall, “Extended meshfree methods without branch enrichment for cohesive cracks,” Computational Mechanics, vol. 40, no. 2, pp. 367–382, 2007. View at Publisher · View at Google Scholar · View at Scopus
  53. T. Rabczuk and T. Belytschko, “Cracking particles: a simplified meshfree method for arbitrary evolving cracks,” International Journal for Numerical Methods in Engineering, vol. 61, no. 13, pp. 2316–2343, 2004. View at Publisher · View at Google Scholar · View at Scopus
  54. T. Rabczuk and T. Belytschko, “A three-dimensional large deformation meshfree method for arbitrary evolving cracks,” Computer Methods in Applied Mechanics and Engineering, vol. 196, no. 29-30, pp. 2777–2799, 2007. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  55. T. Rabczuk and P. M. A. Areias, “A new approach for modelling slip lines in geological materials with cohesive models,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 30, no. 11, pp. 1159–1172, 2006. View at Publisher · View at Google Scholar · View at Scopus
  56. T. Rabczuk and T. Belytschko, “Application of particle methods to static fracture of reinforced concrete structures,” International Journal of Fracture, vol. 137, no. 1–4, pp. 19–49, 2006. View at Publisher · View at Google Scholar · View at Scopus
  57. T. Rabczuk and E. Samaniego, “Discontinuous modelling of shear bands using adaptive meshfree methods,” Computer Methods in Applied Mechanics and Engineering, vol. 197, no. 6–8, pp. 641–658, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  58. T. Rabczuk, P. M. A. Areias, and T. Belytschko, “A meshfree thin shell method for non-linear dynamic fracture,” International Journal for Numerical Methods in Engineering, vol. 72, no. 5, pp. 524–548, 2007. View at Publisher · View at Google Scholar · View at Scopus
  59. T. Rabczuk, J.-H. Song, and T. Belytschko, “Simulations of instability in dynamic fracture by the cracking particles method,” Engineering Fracture Mechanics, vol. 76, no. 6, pp. 730–741, 2009. View at Publisher · View at Google Scholar · View at Scopus
  60. L. Chen and Y. Zhang, “Dynamic fracture analysis using discrete cohesive crack method,” International Journal for Numerical Methods in Biomedical Engineering, vol. 26, no. 11, pp. 1493–1502, 2010. View at Publisher · View at Google Scholar · View at Scopus
  61. Y. Dong, S. Wu, S. S. Xu, Y. Zhang, and S. Fang, “Analysis of concrete fracture using a novel cohesive crack method,” Applied Mathematical Modelling, vol. 34, no. 12, pp. 4219–4231, 2010. View at Publisher · View at Google Scholar · View at Scopus
  62. N. Sageresan and R. Drathi, “Crack propagation in concrete using meshless method,” Computer Modeling in Engineering and Sciences, vol. 32, no. 2, pp. 103–112, 2008. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  63. H. X. Wang and S. X. Wang, “Analysis of dynamic fracture with cohesive crack segment method,” Computer Modeling in Engineering & Sciences, vol. 35, no. 3, pp. 253–274, 2008. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  64. T. Rabczuk, G. Zi, S. Bordas, and H. Nguyen-Xuan, “A simple and robust three-dimensional cracking-particle method without enrichment,” Computer Methods in Applied Mechanics and Engineering, vol. 199, no. 37–40, pp. 2437–2455, 2010. View at Publisher · View at Google Scholar · View at Scopus
  65. J. S. Chen, C. T. Wu, S. Yoon, and Y. You, “A stabilized conforming nodal integration for galerkin meshfree-methods,” International Journal for Numerical Methods in Engineering, vol. 50, pp. 435–466, 2001. View at Google Scholar
  66. G. R. Liu, T. T. Nguyen, K. Y. Dai, and K. Y. Lam, “Theoretical aspects of the smoothed finite element method (SFEM),” International Journal for Numerical Methods in Engineering, vol. 71, no. 8, pp. 902–930, 2007. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  67. T. Nguyen-Thoi, H. C. Vu-Do, T. Rabczuk, and H. Nguyen-Xuan, “A node-based smoothed finite element method (NS-FEM) for upper bound solution to visco-elastoplastic analyses of solids using triangular and tetrahedral meshes,” Computer Methods in Applied Mechanics and Engineering, vol. 199, no. 45–48, pp. 3005–3027, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  68. T. Nguyen-Thoi, P. Phung-Van, T. Rabczuk, H. Nguyen-Xuan, and C. Le-Van, “Free and forced vibration analysis using the n-sided polygonal cellbased smoothed finite element method (ncs-fem),” International Journal of Computational Methods, vol. 10, no. 1, Article ID 13400082, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  69. H. Nguyen-Xuan, T. Rabczuk, T. Nguyen-Thoi, T. N. Tran, and N. Nguyen-Thanh, “Computation of limit and shakedown loads using a node-based smoothed finite element method,” International Journal for Numerical Methods in Engineering, vol. 90, no. 3, pp. 287–310, 2012. View at Publisher · View at Google Scholar · View at Scopus
  70. C. H. Thai, H. Nguyen-Xuan, N. Nguyen-Thanh, T.-H. Le, T. Nguyen-Thoi, and T. Rabczuk, “Static, free vibration, and buckling analysis of laminated composite Reissner-Mindlin plates using NURBS-based isogeometric approach,” International Journal for Numerical Methods in Engineering, vol. 91, no. 6, pp. 571–603, 2012. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  71. T. Belytschko, Y. Y. Lu, and L. Gu, “Element-free Galerkin methods,” International Journal for Numerical Methods in Engineering, vol. 37, no. 2, pp. 229–256, 1994. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  72. M. A. Puso, J. S. Chen, E. Zywicz, and W. Elmer, “Meshfree and finite element nodal integration methods,” International Journal for Numerical Methods in Engineering, vol. 74, no. 3, pp. 416–446, 2008. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  73. H. Talebi, C. Samaniego, E. Samaniego, and T. Rabczuk, “On the numerical stability and mass-lumping schemes for explicit enriched meshfree methods,” International Journal for Numerical Methods in Engineering, vol. 89, no. 8, pp. 1009–1027, 2012. View at Publisher · View at Google Scholar · View at Scopus
  74. P. Baiz, S. Natarajan, S. Bordas, P. Kerfriden, and T. Rabczuk, “Linear buckling analysis of cracked plates by sfem and xfem (smxfem),” Journal of Mechanics of Materials and Structures, vol. 6, no. 9-10, pp. 1213–1238, 2011. View at Google Scholar
  75. S. P. A. Bordas, T. Rabczuk, N.-X. Hung et al., “Strain smoothing in FEM and XFEM,” Computers & Structures, vol. 88, no. 23-24, pp. 1419–1443, 2010. View at Publisher · View at Google Scholar · View at Scopus
  76. S. P. A. Bordas, S. Natarajan, P. Kerfriden et al., “On the performance of strain smoothing for quadratic and enriched finite element approximations (XFEM/GFEM/PUFEM),” International Journal for Numerical Methods in Engineering, vol. 86, no. 4-5, pp. 637–666, 2011. View at Publisher · View at Google Scholar · View at Scopus
  77. L. Chen, T. Rabczuk, S. P. A. Bordas, G. R. Liu, K. Y. Zeng, and P. Kerfriden, “Extended finite element method with edge-based strain smoothing (ESm-XFEM) for linear elastic crack growth,” Computer Methods in Applied Mechanics and Engineering, vol. 212, no. 4, pp. 250–265, 2012. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet · View at Scopus
  78. H. Nguyen-Xuan, G. R. Liu, S. Bordas, S. Natarajan, and T. Rabczuk, “An adaptive singular ES-FEM for mechanics problems with singular field of arbitrary order,” Computer Methods in Applied Mechanics and Engineering, vol. 253, pp. 252–273, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  79. N. Vu-Bac, H. Nguyen-Xuan, L. Chen et al., “A node-based smoothed extended finite element method (NS-XFEM) for fracture analysis,” Computer Modeling in Engineering and Sciences, vol. 73, no. 4, pp. 331–355, 2011. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  80. N. Vu-Bac, H. Nguyen-Xuan, L. Chen et al., “A phantom-node method with edge-based strain smoothing for linear elastic fracture mechanics,” Journal of Applied Mathematics, vol. 2013, Article ID 978026, 12 pages, 2013. View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  81. A. Pandolfi, P. Krysl, and M. Ortiz, “Finite element simulation of ring expansion and fragmentation: the capturing of length and time scales through cohesive models of fracture,” International Journal of Fracture, vol. 95, no. 1–4, pp. 279–297, 1999. View at Google Scholar · View at Scopus
  82. T. Rabczuk, G. Zi, A. Gerstenberger, and W. A. Wall, “A new crack tip element for the phantom-node method with arbitrary cohesive cracks,” International Journal for Numerical Methods in Engineering, vol. 75, no. 5, pp. 577–599, 2008. View at Publisher · View at Google Scholar · View at Scopus
  83. X.-P. Xu and A. Needleman, “Numerical simulations of fast crack growth in brittle solids,” Journal of the Mechanics and Physics of Solids, vol. 42, no. 9, pp. 1397–1434, 1994. View at Google Scholar · View at Scopus
  84. J. Fineberg, E. Sharon, and G. Cohen, “Crack front waves in dynamic fracture,” International Journal of Fracture, vol. 121, no. 1-2, pp. 55–69, 2003. View at Publisher · View at Google Scholar · View at Scopus
  85. K. Ravi-Chandar, “Dynamic fracture of nominally brittle materials,” International Journal of Fracture, vol. 90, no. 1-2, pp. 83–102, 1998. View at Google Scholar · View at Scopus
  86. E. Sharon, S. P. Gross, and J. Fineberg, “Local crack branching as a mechanism for instability in dynamic fracture,” Physical Review Letters, vol. 74, no. 25, pp. 5096–5099, 1995. View at Google Scholar · View at Scopus
  87. T. Rabczuk and G. Zi, “A meshfree method based on the local partition of unity for cohesive cracks,” Computational Mechanics, vol. 39, no. 6, pp. 743–760, 2007. View at Publisher · View at Google Scholar · View at Scopus
  88. J. F. Kalthoff and S. Winkler, “Failure mode transition at high rates of shear loading,” in Proceedings of the International Conference on Impact Loading and Dynamic Behavior of Materials, vol. 1, pp. 185–195, 1987.
  89. J. F. Kalthoff, “Modes of dynamic shear failure in solids,” International Journal of Fracture, vol. 101, no. 1-2, pp. 1–31, 2000. View at Google Scholar · View at Scopus