Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 712145, 6 pages
http://dx.doi.org/10.1155/2014/712145
Research Article

Slope Stability Analysis Using Slice-Wise Factor of Safety

1Department of Civil Engineering, Zhejiang University, Hangzhou 310058, China
2Earthquake Administration of Zhejiang Province, Hangzhou 310013, China

Received 25 October 2013; Accepted 13 June 2014; Published 26 June 2014

Academic Editor: Thomas Hanne

Copyright © 2014 Yu Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. M. Dawson, W. H. Roth, and A. Drescher, “Slope stability analysis by strength reduction,” Géotechnique, vol. 49, no. 6, pp. 835–840, 1999. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Lin and P. Cao, “A dimensionless parameter determining slip surfaces in homogeneous slopes,” KSCE Journal of Civil Engineering, vol. 18, no. 2, pp. 470–474, 2014. View at Google Scholar
  3. H. Lin, W. Zhong, P. Cao, and T. Liu, “Variational safety factors and slip surfaces of slope using three-dimensional strength reduction analysis,” Journal of the Geological Society of India, vol. 82, no. 5, pp. 545–552, 2013. View at Google Scholar
  4. W. Fellenius, “Calculation of the stability of earth dams,” in Proceedings of the 2nd International Congress on Large Dams, vol. 4, p. 445, Washington, DC, USA, 1936.
  5. A. W. Bishop, “The use of the slip circle in the stability analysis of slopes,” Géotechnique, vol. 5, no. 1, pp. 7–17, 1955. View at Google Scholar
  6. N. R. Morgenstern and V. E. Price, “The analysis of the stability of general slip surfaces,” Géotechnique, vol. 15, no. 1, pp. 79–93, 1965. View at Google Scholar
  7. E. Spencer, “A method of analysis of the stability of embankments assuming parallel inter-slice forces,” Géotechnique, vol. 17, no. 1, pp. 11–26, 1967. View at Google Scholar
  8. S. K. Sarma, “Stability analysis of embankments and slopes,” Géotechnique, vol. 23, no. 3, pp. 423–433, 1973. View at Google Scholar
  9. J. M. Duncan and A. L. Buchignani, An Engineering Manual for Slope Stability Studies, Virginia Tech, Blacksburg, Va, USA, 1987.
  10. N. Janbu, “Slope stability computations,” in Embankment Dam Engineering, R. C. Hirschfeld and S. J. P. John, Eds., pp. 47–86, John Wiley & Sons, New York, NY, USA, 1973. View at Google Scholar
  11. S. K. Sarma, “Stability analysis of embankments and slopes,” Journal of the Geotechnical Engineering Division, vol. 105, no. 12, pp. 1511–1524, 1979. View at Google Scholar · View at Scopus
  12. S. K. Sarma and D. Tan, “Determination of critical slip surface in slope analysis,” Géotechnique, vol. 56, no. 8, pp. 539–550, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. C. Li, Y. M. Chen, T. L. T. Zhan, D. Ling, and P. J. Cleall, “An efficient approach for locating the critical slip surface in slope stability analyses using a realcoded genetic algorithm,” Canadian Geotechnical Journal, vol. 47, no. 7, pp. 806–820, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. S. G. Wright, F. H. Kulhawy, and J. M. Duncan, “Accuracy of equilibrium slope stability analysis,” Journal of the Soil Mechanics and Foundations Division, vol. 99, no. 10, pp. 783–791, 1973. View at Google Scholar · View at Scopus
  15. F. Tavenas, B. Trak, and S. Leroueil, “Remarks on the validity of stability analyses,” Canadian Geotechnical Journal, vol. 17, no. 1, pp. 61–73, 1980. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Y. Sun, Y. Zhao, Y. Q. Shang, Y. Yu, and Q. Zhao, “Deep-seated slope failures induced by inappropriate cutting in china,” Rock Mechanics and Rock Engineering, vol. 45, no. 6, pp. 1103–1111, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Y. Sun, Y. Zhao, Y. Q. Shang, and J. Zhong, “Field measurement and failure forecast during the remediation of a failed cut slope,” Environmental Earth Sciences, vol. 69, no. 7, pp. 2179–2187, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. I. B. Donald and P. Giam, “The ACADS slope stability programs review,” in Proceedings of the 6th International Symposium on Landslides, vol. 3, pp. 1665–1670, Christchurch, New Zealand, February 1992.
  19. J. M. Duncan, “State of the art: limit equilibrium and finite-element analysis of slopes,” Journal of Geotechnical Engineering, vol. 122, no. 7, pp. 577–596, 1996. View at Publisher · View at Google Scholar · View at Scopus