Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 712360, 15 pages
Research Article

Sample-Data Modeling of a Zero Voltage Transition DC-DC Converter for On-Board Battery Charger in EV

1Coacalcos Institute of Tecnological Studies, 16 de Septiembre Avenue No. 54, Col. Cabecera Municipal, 55700 Coacalco de Berriozabal, MEX, Mexico
2School of Mechanical and Electrical Engineering, National Polytechnic Institute of Mexico, ESIME Cul., Santa Ana Avenue No. 1000, Col. San Francisco Culhuacan, 04430 Coyoacan, DF, Mexico
3Automotive Mechanical Engineering Department, Polytechnic University of Pachuca, Ex Hacienda de Santa Barbara, Carretera Pachuca Cd. Sahagún, Km. 20, 43830 Zempoala, HGO, Mexico

Received 30 November 2013; Accepted 5 February 2014; Published 2 June 2014

Academic Editor: Sheldon S. Williamson

Copyright © 2014 Teresa R. Granados-Luna et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. J. Perez-Pinal, The Electric Vehicle: Design Stages Considerations, Editorial Academica Española, Madrid, Spain, 2011.
  2. F. J. Perez-Pinal, C. Nunez, R. Alvarez, and M. Gallegos, “Step by step design of the power stage of a light electric vehicle,” International Review of Electrical Engineering, vol. 3, no. 1, pp. 100–108, 2008. View at Google Scholar
  3. F. J. Perez-Pinal, J. C. Kota-Renteria, J. C. Nuñez-Perez, and N. Al-Mutawaly, “Hybrid conversion kit applied to public transportation: a taxi case solution,” International Review on Modelling and Simulations, vol. 6, no. 2, pp. 554–559, 2013. View at Google Scholar
  4. J. Liu and H. Peng, “Modeling and control of a power-split hybrid vehicle,” IEEE Transactions on Control Systems Technology, vol. 16, no. 6, pp. 1242–1251, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. F. J. Perez-Pinal, N. Al-Mutawaly, and J. C. Nuñez-Perez, “Impact of plug-in hybrid electric vehicle in distributed generation and smart grid: a brief review,” International Review on Modelling and Simulations, vol. 6, no. 3, pp. 795–805, 2013. View at Google Scholar
  6. M. Yilmaz and P. T. Krein, “Review of battery charger topologies, charging power levels, and infrastructure for plug-in electric and hybrid vehicles,” IEEE Transactions on Power Electronics, vol. 28, no. 5, pp. 2151–2169, 2013. View at Publisher · View at Google Scholar
  7. A. Tapia-Hernández, I. Araujo-Vargas, M. Ponce-Silva, and M. Ponce-Flores, “Design of a ZVT DC-DC converter with stray components integration for a public-transport electric vehicle,” in Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM '10), pp. 478–483, June 2010. View at Publisher · View at Google Scholar · View at Scopus