Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 713678, 9 pages
http://dx.doi.org/10.1155/2014/713678
Research Article

An Analytical Model for Fatigue Crack Propagation Prediction with Overload Effect

Science and Technology on Reliability and Environmental Engineering Laboratory, School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China

Received 2 May 2014; Revised 22 June 2014; Accepted 23 June 2014; Published 23 July 2014

Academic Editor: Xuefeng Chen

Copyright © 2014 Shan Jiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. C. Alderliesten and J. J. Homan, “Fatigue and damage tolerance issues of Glare in aircraft structures,” International Journal of Fatigue, vol. 28, no. 10, pp. 1116–1123, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  2. A. T. Kermanidis, P. V. Petroyiannis, and S. G. Pantelakis, “Fatigue and damage tolerance behaviour of corroded 2024 T351 aircraft aluminum alloy,” Theoretical and Applied Fracture Mechanics, vol. 43, no. 1, pp. 121–132, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. P. Paris and F. Erdogan, “A critical analysis of crack propagation laws,” Journal of Fluids Engineering, vol. 85, no. 4, pp. 528–533, 1963. View at Publisher · View at Google Scholar
  4. E. Wolf, “Fatigue crack closure under cyclic tension,” Engineering Fracture Mechanics, vol. 2, no. 1, pp. 37–45, 1970. View at Publisher · View at Google Scholar · View at Scopus
  5. J. C. Newman Jr., Prediction of Crack Growth under Variable-Amplitude Loading in Thin-Sheet 2024-T3 Aluminum Alloys, Engineering against Fatigue, University of Sheffield, 1997.
  6. W. Elbert, “The significance of fatigue crack closure,” in Damage Tolerance in Aircraft Structures: A Symposium Presented at the Seventy-Third Annual Meeting American Society for Testing and Materials, pp. 486–230, ASTM International, Toronto, Canada, June 1971.
  7. W. Zhang and Y. Liu, “In situ SEM testing for crack closure investigation and virtual crack annealing model development,” International Journal of Fatigue, vol. 43, pp. 188–196, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Zhang and Y. Liu, “Investigation of incremental fatigue crack growth mechanisms using in situ SEM testing,” International Journal of Fatigue, vol. 42, pp. 14–23, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. C. Newman Jr., “A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading,” ASTM International—STP Series, vol. 748, pp. 53–84, 1981. View at Google Scholar
  10. J. C. Newman Jr., “A crack opening stress equation for fatigue crack growth,” International Journal of Fracture, vol. 24, no. 4, pp. R131–R135, 1984. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Z. Zhang and P. Bowen, “On the finite element simulation of three-dimensional semi-circular fatigue crack growth and closure,” Engineering Fracture Mechanics, vol. 60, no. 3, pp. 341–360, 1998. View at Publisher · View at Google Scholar · View at Scopus
  12. F. V. Antunes, A. G. Chegini, R. Branco, and D. Camas, “A numerical study of plasticity induced crack closure under plane strain conditions,” International Journal of Fatigue, 2014. View at Publisher · View at Google Scholar
  13. B. Budiansky and J. W. Hutchinson, “Analysis of closure in fatigue crack growth,” Journal of Applied Mechanics, vol. 45, no. 2, pp. 267–276, 1978. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Llorca and V. S. Gálvez, “Modelling plasticity-induced fatigue crack closure,” Engineering Fracture Mechanics, vol. 37, no. 1, pp. 185–196, 1990. View at Publisher · View at Google Scholar · View at Scopus
  15. P. F. P. de Matos and D. Nowell, “Modeling fatigue crack closure using dislocation dipoles,” 2006.
  16. J. H. Kim and S. B. Lee, “Behavior of plasticity-induced crack closure and roughness-induced crack closure in aluminum alloy,” International Journal of Fatigue, vol. 23, supplement 1, pp. S247–S251, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Willenborg, R. M. Engle, and H. A. Wood, “A crack growth retardation model using an effective stress concept,” Tech. Rep., 1971. View at Google Scholar
  18. O. E. Wheeler, “Spectrum loading and crack growth,” Journal of Basic Engineering Transactions of the ASME, vol. 94, no. 1, pp. 181–186, 1972. View at Google Scholar · View at Scopus
  19. X. Huang, M. Torgeir, and W. Cui, “An engineering model of fatigue crack growth under variable amplitude loading,” International Journal of Fatigue, vol. 30, no. 1, pp. 2–10, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Daneshpour, M. Koçak, S. Langlade, and M. Horstmann, “Effect of overload on fatigue crack retardation of aerospace Al-alloy laser welds using crack-tip plasticity analysis,” International Journal of Fatigue, vol. 31, no. 10, pp. 1603–1612, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. B. K. C. Yuen and F. Taheri, “Proposed modifications to the Wheeler retardation model for multiple overloading fatigue life prediction,” International Journal of Fatigue, vol. 28, no. 10, pp. 1803–1819, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. F. J. McMaster and D. J. Smith, “Predictions of fatigue crack growth in aluminium alloy 2024-T351 using constraint factors,” International Journal of Fatigue, vol. 23, no. 1, pp. S93–S101, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Yang, W. Zhang, and Y. Liu, “Existence and insufficiency of the crack closure for fatigue crack growth analysis,” International Journal of Fatigue, vol. 62, pp. 144–153, 2013. View at Google Scholar
  24. K. Sadananda, A. K. Vasudevan, R. L. Holtz, and E. U. Lee, “Analysis of overload effects and related phenomena,” International Journal of Fatigue, vol. 21, no. 1, pp. S233–S246, 1999. View at Publisher · View at Google Scholar · View at Scopus
  25. Y. K. Tür and Ö. Vardar, “Periodic tensile overloads in 2024-T3 AL-alloy,” Engineering Fracture Mechanics, vol. 53, no. 1, pp. 69–77, 1996. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Daneshpour, J. Dyck, V. Ventzke, and N. Huber, “Crack retardation mechanism due to overload in base material and laser welds of Al alloys,” International Journal of Fatigue, vol. 42, pp. 95–103, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Schijve, M. Skorupa, A. Skorupa, T. Machniewicz, and P. Gruszczynski, “Fatigue crack growth in the aluminium alloy D16 under constant and variable amplitude loading,” International Journal of Fatigue, vol. 26, no. 1, pp. 1–15, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. C. M. Manjunatha and B. K. Parida, “Prediction of fatigue crack growth after single overload in an aluminum alloy,” AIAA Journal, vol. 42, no. 8, pp. 1536–1542, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. F. Taheri, D. Trask, and N. Pegg, “Experimental and analytical investigation of fatigue characteristics of 350WT steel under constant and variable amplitude loadings,” Marine Structures, vol. 16, no. 1, pp. 69–91, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. P. A. Rushton and F. Taheri, “Prediction of crack growth in 350WT steel subjected to constant amplitude with over- and under-loads using a modified wheeler approach,” Marine Structures, vol. 16, no. 7, pp. 517–539, 2003. View at Publisher · View at Google Scholar · View at Scopus