Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 745250, 8 pages
http://dx.doi.org/10.1155/2014/745250
Research Article

Error Modeling and Sensitivity Analysis of a Five-Axis Machine Tool

1Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin 300072, China
2Beijing Precision Machinery & Engineering Research Co., Ltd., Beijing 101312, China

Received 20 October 2013; Revised 27 February 2014; Accepted 27 February 2014; Published 29 May 2014

Academic Editor: Miguel A. F. Sanjuán

Copyright © 2014 Wenjie Tian et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Ramesh, M. A. Mannan, and A. N. Poo, “Error compensation in machine tools—a review. Part I. Geometric, cutting-force induced and fixture-dependent errors,” International Journal of Machine Tools and Manufacture, vol. 40, no. 9, pp. 1235–1256, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Schwenke, W. Knapp, H. Haitjema, A. Weckenmann, R. Schmitt, and F. Delbressine, “Geometric error measurement and compensation of machines-An update,” CIRP Annals—Manufacturing Technology, vol. 57, no. 2, pp. 660–675, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. W. Tian, W. Gao, D. Zhang et al., “A general approach for error modeling of machine tools,” International Journal of Machine Tools and Manufacture, vol. 79, pp. 17–23, 2014. View at Google Scholar
  4. V. Kiridena and P. M. Ferreira, “Mapping the effects of positioning errors on the volumetric accuracy of five-axis CNC machine tools,” International Journal of Machine Tools and Manufacture, vol. 33, no. 3, pp. 417–437, 1993. View at Google Scholar · View at Scopus
  5. A. K. Srivastava, S. C. Veldhuis, and M. A. Elbestawit, “Modelling geometric and thermal errors in a five-axis cnc machine tool,” International Journal of Machine Tools and Manufacture, vol. 35, no. 9, pp. 1321–1337, 1995. View at Google Scholar · View at Scopus
  6. B. K. Jha and A. Kumar, “Analysis of geometric errors associated with five-axis machining centre in improving the quality of cam profile,” International Journal of Machine Tools and Manufacture, vol. 43, no. 6, pp. 629–636, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Lin and Y. Shen, “Modelling of five-axis machine tool metrology models using the matrix summation approach,” International Journal of Advanced Manufacturing Technology, vol. 21, no. 4, pp. 243–248, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. S. H. Yang, Real-time compensation for geometric, thermal, and cutting force induced errors in machining tools [Ph.D. thesis], University of Michigan, Ann Arbor, Mich, USA, 1996.
  9. Y. Y. Hsu and S. S. Wang, “A new compensation method for geometry errors of five-axis machine tools,” International Journal of Machine Tools and Manufacture, vol. 47, no. 2, pp. 352–360, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. J. H. Lee, Y. Liu, and S. H. Yang, “Accuracy improvement of miniaturized machine tool: Geometric error modeling and compensation,” International Journal of Machine Tools and Manufacture, vol. 46, no. 12-13, pp. 1508–1516, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. K. G. Ahn and D. W. Cho, “Analysis of the volumetric error uncertainty of a three-axis machine tool by beta distribution,” International Journal of Machine Tools and Manufacture, vol. 40, no. 15, pp. 2235–2248, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Rahman, J. Heikkala, and K. Lappalainen, “Modeling, measurement and error compensation of multi-axis machine tools. Part I. Theory,” International Journal of Machine Tools and Manufacture, vol. 40, no. 10, pp. 1535–1546, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. A. C. Okafor and Y. M. Ertekin, “Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics,” International Journal of Machine Tools and Manufacture, vol. 40, no. 8, pp. 1199–1213, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Zhu, G. Ding, S. Qin, J. Lei, L. Zhuang, and K. Yan, “Integrated geometric error modeling, identification and compensation of CNC machine tools,” International Journal of Machine Tools and Manufacture, vol. 52, no. 1, pp. 24–29, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Huang, D. J. Whitehouse, and D. G. Chetwynd, “A unified error model for tolerance design, assembly and error compensation of 3-DOF parallel kinematic machines with parallelogram struts,” CIRP Annals—Manufacturing Technology, vol. 51, no. 1, pp. 297–301, 2002. View at Google Scholar · View at Scopus
  16. H. Chanal, F. Paccot, and E. Duc, “Sensitivity analysis of an overconstrained parallel structure machine tool, the Tripteor X7,” Applied Mechanics and Materials, vol. 162, pp. 394–402, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. K. C. Fan, H. Wang, J. W. Zhao, and T. H. Chang, “Sensitivity analysis of the 3-PRS parallel kinematic spindle platform of a serial-parallel machine tool,” International Journal of Machine Tools and Manufacture, vol. 43, no. 15, pp. 1561–1569, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. S. M. Wang and J. J. Lin, “On-machine volumetric-error measurement and compensation methods for micro machine tools,” International Journal of Precision Engineering and Manufacturing, vol. 14, no. 6, pp. 989–994, 2013. View at Google Scholar
  19. A. J. Patel and K. F. Ehmann, “Volumetric error analysis of a Stewart platform-based machine tool,” CIRP Annals—Manufacturing Technology, vol. 46, no. 1, pp. 287–290, 1997. View at Google Scholar · View at Scopus
  20. G. Chen, Y. Liang, Y. Sun et al., “Volumetric error modeling and sensitivity analysis for designing a five-axis ultra-precision machine tool,” The International Journal of Advanced Manufacturing Technology, vol. 68, no. 9–12, pp. 2525–2534, 2013. View at Google Scholar
  21. L. W. Tsai, Robot Analysis: The Mechanics of Serial and Parallel Manipulators, John Wiley & Sons, New York, NY, USA, 1999.