Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 821419, 7 pages
http://dx.doi.org/10.1155/2014/821419
Research Article

Research of Impact Load in Large Electrohydraulic Load Simulator

School of Automation Science and Electrical Engineering, Beihang University, Beijing 100191, China

Received 7 July 2014; Revised 26 July 2014; Accepted 26 July 2014; Published 18 August 2014

Academic Editor: Hui Zhang

Copyright © 2014 Yongguang Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Zhanlin, Hydraulic Servo Control System, Beihang University Press, Beijing, China, 1987.
  2. Z. Jiao, Q. Hua, and X. Wang, “Evaluation system of load simulator,” Chinese Journal of Mechanical Engineering, vol. 38, no. 11, pp. 26–30, 2002. View at Google Scholar
  3. L. K. Stewart, B. Durantb, J. Wolfsonc, and G. A. Hegemierb, “Experimentally generated high-g shock loads using Hydraulic Blast Simulator,” International Journal of Impact Engineering, vol. 6, no. 9, pp. 86–94, 2014. View at Google Scholar
  4. D. H. Su and Y. Q. Wang, “Development of electro-hydraulic load simulator with high precise,” in Proceedings of the 5th International Conference on Fluid Power Transmission and Control, pp. 281–285, Hangzhou, China, 2001.
  5. C. W. Wang, Z. X. Jiao, S. Wu, and Y. X. Shang, “An experimental study of the dual-loop control of electro-hydraulic load simulator,” Chinese Journal of Aeronautics, vol. 26, no. 6, pp. 1586–1595, 2013. View at Google Scholar
  6. Y. Hao, L. Changchun, and C. Ce, “Simulation and experiment of electro—hydraulic servo systems load simulator,” Chinese Hydraulics and Pneumatics, vol. 3, pp. 19–52, 2013. View at Google Scholar
  7. K. Zhou, Y. Li, and Y. Yunfeng, “Research of the hydraulic load simulator control,” Science Technology and Engineering, vol. 35, no. 12, pp. 9523–9527, 2012. View at Google Scholar
  8. Z. Zhang, X. Liu, and J. Wang, “Robust H sliding mode control with pole placement for a fluid power electrohydraulic actuator (EHA) system,” International Journal of Advanced Manufacturing Technology, vol. 73, no. 5–8, pp. 1095–1104, 2014. View at Publisher · View at Google Scholar
  9. Z. Jiao, Q. Hua, X. Wang, and S. Wang, “Compound control of electro-hydraulic load simulator,” Chinese Journal of Mechanical Engineering, vol. 38, no. 2, pp. 685–689, 2002. View at Google Scholar
  10. H. Qing and J. Zongxia, “CRNN neural network control of the load simulator,” Chinese Journal of Mechanical Engineering, vol. 38, no. 1, pp. 15–19, 2003. View at Google Scholar
  11. Z. Jiao and Q. Hua, “RBF neural network control on electro-hydraulic load simulator,” Chinese Journal of Mechanical Engineering, vol. 39, no. 1, pp. 10–14, 2003. View at Google Scholar · View at Scopus
  12. Z. Yuan and L. Wang, “Compound compensator based on cerebellar model articulation controller for surplus torque in passive electric loading system,” Journal of Tongji University, vol. 32, no. 5, pp. 685–689, 2004. View at Google Scholar · View at Scopus
  13. L. Chenggong, J. Hongtao, and J. Zongxia, “Mechanism and suppression of extraneous torque of motor driver load simulator,” Journal of Beijing University of Aeronautics and Astronautics, vol. 32, no. 2, pp. 204–208, 2006. View at Google Scholar · View at Scopus
  14. H. Zhang and S. Yang, “On energy-to-peak filtering for nonuniformly sampled nonlinear systems: A Markovian Jump System Approach,” IEEE Transactions on FUZZY System, vol. 22, no. 1, pp. 212–222, 2014. View at Publisher · View at Google Scholar
  15. H. Zhang, X. Zhang, and J. Wang, “Robust gain-scheduling energy-to-peak control of vehicle lateral dynamics stabilization,” Vehicle System Dynamics, pp. 309–338, 2014. View at Google Scholar
  16. X. Wencan, “Electric cylinder and air cylinder,” Hydraulics Pneumatics & Seals, vol. 24, no. 2, pp. 18–22, 2006. View at Google Scholar
  17. T. Ying, “The analysis on driving and force of electric cylinder,” Heavy Machinery Science and Technology, vol. 13, no. 1, pp. 10–14, 2007. View at Google Scholar
  18. X. Xie and H. Yang, “Model of servo motor in the position servo system,” Journal of Beijing Institute of Technology, vol. 16, no. 3, pp. 323–326, 1996. View at Google Scholar
  19. F. Yongling, Modeling and Simulation Based on AMESim, Beihang University Press, Beijing, China, 2006.
  20. M. Changlin, H. Xianxiang, and H. Lin, “Simulation and optimization studies of electro-hydraulic servo system based on AMESim,” Hydraulics Pneumatics & Seals, vol. 1, pp. 32–34, 2006. View at Google Scholar
  21. W. Yafeng and G. Jun, “Research on simulation technique based on AMESim for aircraft hydraulic system,” Journal of Shenyang University of Technology, vol. 29, no. 4, pp. 368–371, 2007. View at Google Scholar
  22. H. Zhang and J. Wang, “Combined feedback-feedforward tracking control for networked control systems with probabilistic delays,” Journal of the Franklin Institute, Engineering and Applied Mathematics, vol. 351, no. 6, pp. 3477–3489, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  23. Z. Shuai, H. Zhang, J. Wang, and J. Li, “Lateral motion control for four-wheel-independent-drive electric vehicles using optimal torque allocation and dynamic message priority scheduling,” Control Engineering Practice, pp. 55–66, 2014. View at Google Scholar