Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 869631, 8 pages
http://dx.doi.org/10.1155/2014/869631
Research Article

Sample Entropy-Based Approach to Evaluate the Stability of Double-Wire Pulsed MIG Welding

1College of Electromechanical Engineering, Guangdong Polytechnic Normal University, Guangzhou 510635, China
2School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China
3Department of Mechanical and Aerospace Engineering, Hong Kong University of Science and Technology, Hong Kong

Received 15 March 2014; Revised 9 May 2014; Accepted 9 May 2014; Published 3 June 2014

Academic Editor: Hamid Reza Karimi

Copyright © 2014 Ping Yao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Y. Li, J. Y. Yu, C. Hilton, and H. H. Liu, “Adaptive sliding-mode control for nonlinear active suspension vehicle systems using T-S fuzzy approach,” IEEE Transactions on Industrial Electronics, vol. 60, no. 8, pp. 3328–3338, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Zhou and L. L. Cai, “A nonlinear current control method for resistance spot welding,” IEEE/ASME Transactions on Mechatronics, vol. 19, no. 2, pp. 559–569, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Zhang, X. Lin, and Y. T. Wang, “Robust fault detection filter design for a class of neutral-type neural networks with time-varying discrete and unbounded distributed delays,” Optimal Control Applications and Methods, vol. 34, no. 5, pp. 590–607, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Zhou and L. L. Cai, “Online measuring power factor in AC resistance spot welding,” IEEE Transactions on Industrial Electronics, vol. 61, no. 1, pp. 575–582, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Yin, S. X. Ding, A. Haghani, H. Hao, and P. Zhang, “A comparison study of basic data-driven fault diagnosis and process monitoring methods on the benchmark Tennessee Eastman process,” Journal of Process Control, vol. 22, no. 9, pp. 1567–1581, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. H. R. Karimi, “Robust synchronization and fault detection of uncertain master-slave systems with mixed time-varying delays and nonlinear perturbations,” International Journal of Control, Automation and Systems, vol. 9, no. 4, pp. 671–680, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Yin, X. B. Yang, and H. R. Karimi, “Data-driven adaptive observer for fault diagnosis,” Mathematical Problems in Engineering, vol. 2012, Article ID 832836, 21 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Luksa and Z. Rymarski, “Collection of arc welding process data,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 17, pp. 377–380, 2006. View at Google Scholar
  9. T. Shinoda, H. Kaneda, and Y. Takeuchi, “An evaluation of short circuiting arc phenomena in GMA welding,” Welding and Metal Fabrication, vol. 57, no. 10, pp. 522–525, 1989. View at Google Scholar · View at Scopus
  10. M. Hermans and G. den Ouden, “Process behavior and stability in short circuit gas metal arc welding,” Welding Journal, vol. 78, no. 4, pp. 137–141, 1999. View at Google Scholar · View at Scopus
  11. T. P. Quinn, C. Smith, C. N. McCowan, E. Blachowiak, and R. B. Madigan, “Arc sensing for defects in constant-voltage gas metal arc welding,” Welding Journal, vol. 78, no. 9, pp. 322–328, 1999. View at Google Scholar · View at Scopus
  12. S. Adolfsson, A. Bahrami, G. Bolmsjö, and I. Claesson, “On-line quality monitoring in short-circuit gas metal arc welding,” Welding Journal, vol. 78, no. 2, pp. 59–73, 1999. View at Google Scholar · View at Scopus
  13. A. S. Klimov, A. K. Kudinov, A. V. Komirenko, and A. N. Antsiborov, “A method for measuring current in resistance welding,” Welding International, vol. 27, no. 10, pp. 830–833, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Šoštaric, D. Vinko, D. Žagar, and I. Samardžic, “Reliability of welding parameters monitoring system,” Strojarstvo, vol. 52, pp. 217–226, 2010. View at Google Scholar
  15. K. F. He, Q. Li, and J. Chen, “An arc stability evaluation approach for SW AC SAW based on Lyapunov exponent of welding current,” Measurement, vol. 46, no. 1, pp. 272–278, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. J. X. Xue, Z. P. Yi, P. Fang, and L. Jia, “Study on virtual instrument for analyzing electrical signal of welding process,” Chinese Journal of Mechanical Engineering, vol. 40, no. 2, pp. 60–63, 2004 (Chinese). View at Google Scholar · View at Scopus
  17. P. Yao, Intelligent control strategies and performance evaluation of integrated double wire arc welding power source, [Ph. D. Dissertation], South China University of Technology, Guangzhou, China, 2012, (Chinese).
  18. H. Li, J. H. Wang, D. F. Ai, and Y. Gao, “Synchronous multi-information acquisition system for arc welding process,” Journal of Tianjin University, vol. 45, pp. 184–189, 2012 (Chinese). View at Google Scholar
  19. B. Chen, J. F. Wang, and S. B. Chen, “A study on application of multi-sensor information fusion in pulsed GTAW,” Industrial Robot, vol. 37, no. 2, pp. 168–176, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. M. A. Chen, Y. N. Jiang, and C. S. Wu, “Effect of current waveform on metal transfer in controlled short circuiting gas metal arc welding,” Advanced Materials Research, vol. 718–720, pp. 202–208, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. S. M. Pincus, “Approximate entropy as a measure of system complexity,” Proceedings of the National Academy of Sciences of the United States of America, vol. 88, no. 6, pp. 2297–2301, 1991. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  22. S. M. Pincus, “Approximate entropy (ApEn) as a complexity measure,” Chaos, vol. 5, no. 1, pp. 110–117, 1995. View at Google Scholar · View at Scopus
  23. S. M. Pincus, I. M. Gladstone, and R. A. Ehrenkranz, “A regularity statistic for medical data analysis,” Journal of Clinical Monitoring, vol. 7, no. 4, pp. 335–345, 1991. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Pincus and R. E. Kalman, “Irregularity, volatility, risk, and financial market time series,” Proceedings of the National Academy of Sciences of the United States of America, vol. 101, no. 38, pp. 13709–13714, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  25. B. Cao, Y. P. Xiang, X. Q. Lü, M. Zeng, and S. S. Huang, “Approximate entropy—a new statistic to quantify arc and welding process stability in short-circuiting gas metal arc welding,” Chinese Physics B, vol. 17, no. 3, pp. 865–877, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. B. Cao, X. Q. Lü, M. Zeng, Z. M. Wang, and S. S. Huang, “Approximate entropy analysis of current in short-circuiting arc welding,” Acta Physica Sinica, vol. 55, no. 4, pp. 1696–1705, 2006 (Chinese). View at Google Scholar · View at Scopus
  27. J. Nie, Y. Shi, J. K. Huang, and D. Fang, “Approximate entropy GRNN forecast for aluminum alloy pulsed MIG welding stability,” Transactions of the China Welding Institution, vol. 31, no. 8, pp. 77–80, 2010 (Chinese). View at Google Scholar · View at Scopus
  28. W. C. Zhang, L. J. Yang, and X. Q. Lü, “Approximate entropy based meso-spray transfer analysis of Al-alloy pulsed metal inert-gas welding under self-adapting control,” Acta Physica Sinica, vol. 60, no. 2, Article ID 020601, 2011 (Chinese). View at Google Scholar · View at Scopus
  29. J. S. Richman and J. R. Moorman, “Physiological time-series analysis using approximate and sample entropy,” American Journal of Physiology: Heart and Circulatory Physiology, vol. 278, no. 6, pp. 2039–2049, 2000. View at Google Scholar · View at Scopus
  30. R. Alcaraz and J. J. Rieta, “A novel application of sample entropy to the electrocardiogram of atrial fibrillation,” Nonlinear Analysis: Real World Applications, vol. 11, no. 2, pp. 1026–1035, 2010. View at Publisher · View at Google Scholar · View at MathSciNet
  31. H. M. Al-Angari and A. V. Sahakian, “Use of sample entropy approach to study heart rate variability in obstructive sleep apnea syndrome,” IEEE Transactions on Biomedical Engineering, vol. 54, no. 10, pp. 1900–1904, 2007. View at Publisher · View at Google Scholar · View at Scopus
  32. N. Castro, J. Grimaldos, O. Escalona, V. Kodoth, E. Lau, and G. Manoharan, “Assessment of atrial fibrillation organization during internal electrical cardioversion using sample entropy,” in Proceedings of the Andean Region International Conference (Andescon '12), pp. 191–194, Cuenca, Ecuador, November 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. R. Menayo, A. Encarnación, G. M. Gea, and P. J. Marcos, “Sample entropy-based analysis of differential and traditional training effects on dynamic balance in healthy people,” Journal of Motor Behavior, vol. 46, no. 2, pp. 73–82, 2014. View at Publisher · View at Google Scholar
  34. R. Alcaraz and J. J. Rieta, “A review on sample entropy applications for the non-invasive analysis of atrial fibrillation electrocardiograms,” Biomedical Signal Processing and Control, vol. 5, no. 1, pp. 1–14, 2010. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Widodo, M. Shim, W. Caesarendra, and B. Yang, “Intelligent prognostics for battery health monitoring based on sample entropy,” Expert Systems with Applications, vol. 38, no. 9, pp. 11763–11769, 2011. View at Publisher · View at Google Scholar · View at Scopus
  36. D. E. Lake, J. S. Richman, M. P. Griffin, and J. R. Moorman, “Sample entropy analysis of neonatal heart rate variability,” American Journal of Physiology: Regulatory Integrative and Comparative Physiology, vol. 283, no. 3, pp. R789–R797, 2002. View at Google Scholar · View at Scopus